 Shop Parts for Pre War Harley-Davidson

Transmission



Transmission

Main Shaft and Related Parts

Main Shaft and Related Parts

Counter Shafts and Related Parts

Counter Shafts and Related Parts

The Cyclery Repair Tabs for V-Series Transmisisons

The Cyclery Repair Tabs for V-Series Transmisisons

The cast-on mounting tabs for the inner primary on V-Series transmisisons are often broken and/or missing. These raw castings can be cut and ground to shape and welded to the housing to re-establish a secure primary mount.

Colony Transmission Adjusting Screw 1925-1936

Colony Transmission Adjusting Screw 1925-1936

Bearing Housing Lockwasher

Bearing Housing Lockwasher

Reproduction of the dual ring lockwasher which secures the main shaft ball bearing housing.

Grease Tubes for Main Bearing

Grease Tubes for Main Bearing

Accurate reproductions of the tube and alemite fitting for the main bearing of J and V-series transmissions.

Stud Kits for Transmission Top Cover: IOE and V-Models 1915-1936

Stud Kits for Transmission Top Cover: IOE and V-Models 1915-1936

Stud Kits for Starter Cover: IOE and V-Models 1915-1936

Stud Kits for Starter Cover: IOE and V-Models 1915-1936

Transmission Cover Nuts 1915-1936

Transmission Cover Nuts 1915-1936

Special nuts (5/16-24x7/16) as used to mount the transmission covers and for various other applications.

Thrust Washers Clutch Bearing

Thrust Washers Clutch Bearing

Selection of hardened and ground thrust washers for the clutch bearing. Required to establish the correct lateral play of your clutch basket.

Transmission Filler Plugs for IOE and V Models

Transmission Filler Plugs for IOE and V Models

Reproduction of the transmission oil filler plug for all IOE and V-series models.

Drain Plugs for Transmission 1915-1936

Drain Plugs for Transmission 1915-1936

Reproduction of the stock transmission case drain plug with correct slotted hex head.

Reproduction of the oiler cups that the Harley-Davidson used thru 1924. Precisely made with correct spring-loaded and knurled cap. Applied on clutch release lever bosses and early rocker arms.

Strange Bird Transmission Vent Lines for IOE models 1916-1928

Strange Bird Transmission Vent Lines for IOE models 1916-1928

These transmission vent lines are mounted to the transmission cover and can be aligned to additionally lubricate the secondary chain.

The Cyclery Kickstarter Sector Gear IOE and V-Models

The Cyclery Kickstarter Sector Gear IOE and V-Models

Quality reproduction of the sector gear as used for kickstarters of IOE and early V models.

The Cyclery Kickstarter Clutch and Gears IOE and V-Models

The Cyclery Kickstarter Clutch and Gears IOE and V-Models

Quality reproductions of the starter clutch and corresponding mainshaft and kicker arm gears as used for kickstarters of IOE and early V-series models. If installed as the offered combination they will fit thru 1930.

Spring for Kickstarter Clutch IOE and V-Models

Spring for Kickstarter Clutch IOE and V-Models

Quality reproduction of the kick starter clutch spring of IOE and early V models.

Washers for Starter Crank Springs IOE Models 1916-1923

Washers for Starter Crank Springs IOE Models 1916-1923

On these washers, which are placed on the kickstarter shaft, the starter crank springs of IOE models can be hooked on the incorporated notch.

Starter Crank Springs 1916-1936

Starter Crank Springs 1916-1936

Starter crank return springs for IOE and V models of the 1916-1936 year group.

Kicker Cover Bushing

Kicker Cover Bushing

Accurate reproduction of the kick start crank bushing to replace the original part.

Kicker Arms IOE Models 1916-1929

Kicker Arms IOE Models 1916-1929

Precise reproduction of the kicker arms as used on all 3-speed IOE model transmissions from 1916 to 1929. Additionally included are the kicker cover bushing, nut and tab washer.

CMS Bicycle Style Kicker Pedals for Models 1916-1935

CMS Bicycle Style Kicker Pedals for Models 1916-1935

Restoration quality kicker pedals by the US manufacturer CMS. These won't twist or bend and have the ruggedness which is required on bikes which are kick started often. They feature the correct early style tapered rubbers and end plates.

Gaskets for Transmission Top Cover: 3-Speed 1915-1936

Gaskets for Transmission Top Cover: 3-Speed 1915-1936

Precise, CNC-supported manufacture.

Gaskets for Starter Cover: 3-Speed 1916-1936

Gaskets for Starter Cover: 3-Speed 1916-1936

Precise, CNC-supported manufacture.

Transmission Bearing Rollers

Transmission Bearing Rollers

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com