Carburetor

Rebuild Kits for Schebler Carburetors

Kits which comprise all springs, shafts and related small parts to rebuild Schebler carburetors.

more …

The Cyclery Float Bowl Assemblies for Schebler DLX Carburetors

Schebler DLX carburetor float bowls with all necessary small parts for models from 1921-1933.

more …

The Cyclery Float Bowl Nuts for Schebler DLX Carburetors

Float bowl nuts with gaskets for mounting float bowls on Schebler DLX carburetors.

more …

The Cyclery Floats for Schebler Carburetors

Reproductions of the floats for all Schebler H and De Luxe carburetors. Made from polyurethane foam, which is the same material used on new cars/trucks. They will neither leak, sink nor soak and are resistent to the attack of today's fuels.

more …

Floats for Schebler Carburetors

Reproductions of the floats for all Schebler H and De Luxe carburetors. Made from nitrile rubber NBR foam, which is the same material used on new cars/trucks. They will neither leak, sink nor soak and are resistent to the attack of today's fuels.

more …

Bowl Caps for Schebler Carburetors

Reproduction of the stock knurled cap screw for the bowl of Schebler carburetors.

more …

The Cyclery Hot Air Connections for Schebler HX Carburetors

This device is meant to prevent the carburetor from icing up in cold temperatures. It is mounted underneath the float bowl, directly on the nozzle channel of Schebler HX carburetors. Can be fixed in the correct position with a clamping screw. The opening of this hot air connection points towards the rear cylinder, where it picks up the heat and warms up the fuel in the float bowl.

more …

Air Intake Valve Discs for Schebler HX Carburetors

Machined leather discs for the air intake valve mechanism of early Schebler carburetors.

more …

Throttle Shaft Levers for Schebler Carburetors

Detailed reproduction of the throttle shaft levers on Schebler carburetors.

more …

Bowl Lock Nuts for Schebler HX Carburetors

Accurate reproduction of the stock bowl nut for early Schebler carburetors.

more …

Main Nozzles for Schebler DLX Carburetors

Precise reproductions of Schebler DLX carburetor main nozzles.

more …

Float Valve Needles for Schebler Carburetors

Precise reproduction of the float valve needle for all Schebler H and Deluxe carburetors.

more …

Into The Wilderness Float Levers for Schebler Carburetors

High-quality, precision machined brass float lever with stainless steel float needle and float needle retaining nut for most Schebler HX carburetors and DLX carbs with brass bowls.

more …

Needle Valves for Schebler HX Carburetors

Precise reproductions of Schebler HX carburetor needles. Length measured from the tip of needle to where the ball starts.

more …

The Cyclery Needle Valves for Schebler DLX Carburetors

Reproductions of Schebler DLX carburetor jet needles.

more …

Mounting Bolt Kits for Linkert Carburetors

Reproductions of the stock hex head bolts to fasten Linkert carburetors to the manifold.

more …

The Cyclery Choke Shaft Kits for Schebler DLX Carburetors

Choke shafts kits for Schebler DLX carburetors consisting of choke shaft, choke disc and screws, spring, choke lever and cotter pin.

more …

Throttle Cable Nipples for Models →1975

Accurate reproductions of the throttle lever wire blocks used on all Linkert carburetors. Also fit Tillotson and Bendix carbs. The oversize version is for worn levers.

more …

Rubber Ducky Floats for Linkert Carburetors

These are absolutely the best and last floats you will ever buy for your Linkert Carburetor. The RUBBER DUCKY floats have been tested in the modern fuels available today that contain ethanol and various additives. Neither will they ever shrink nor corrode. Tests have also shown them to be reliable in 112 Octane Leaded Race Gas. RUBBER DUCKY Floats feature the correct weight and size so they can be set at the factory level which means they maintain the stock responsiveness and operation of your carburetor.

more …

The Cyclery Bowl Thread Repair Bushing

A common problem on Schebler DLX and Linkert M-series carburetors are stripped or damaged threads for the bowl nut. This repair bushing allows for a professional repair back to stock specs. Installation requires a lathe.

more …

The Cyclery Repair Kits for Schebler DLX Float Bowls

more …

Rebuild Kits for Linkert Carburetors

Complete kits which comprise all small parts to rebuild your worn Linkert carburetor. One part number and you are all set.

more …

The Cyclery Manifolds for Big Twin Flatheads

Exact reproduction of the manifolds as they were installed on Big Twin Flathead models of the 1933-1948 model year range.

more …

Manifold Intake Nipples, Nuts and Parts

Complete intake nipple kits to connect cylinders and manifolds.

more …

Carburetor Support Brackets IOE Twins

Perfect reproduction of the carburetor/manifold support bracket for all ioe twins 1925-29.

more …

Air Cleaner 1928-1929

Nice reproduction of the factory air cleaner for stock Schebler DLX carburetors.

more …

Air Cleaner Clamp 1928-1929

Exact reproduction of the air cleaner clamp used on Schebler DLX carburetors.

more …

Air Cleaner Connection 1928-1929

Nice reproduction of the factory air cleaner connection for stock Schebler carburetors, including air flap.

more …

Linkert 6 ” Air Cleaners

Exact reproductions of HD’s first real air cleaners as used on Linkert carburetors. Choose from the early version without logo, with screw-on or J-slot connection between the chromed cover and cad/parkerized backing plate, or the later version with stamped logo. They come complete with spring and metal mesh filter element. The J-slot versions with riveted-on inspection plate, too. Correct for model years 1935-1940, however they will fit all Linkert M-series carbs.

more …

Linkert 7 ” Air Cleaners Bird Style

Nice reproduction of a 1940s accessory air cleaner for Linkert carburetors. It features an art deco bird design instead of the H-D trademark. There is a version for right side installation on OHV (Knucklehead and Panhead) models and a left side version for Flatheads. Very accurate with J-slot twist-connection between the cover and backing plate.

more …

Linkert Air Cleaner Mounting Kit

Reproductions of screws and lock plates to mount the air cleaner backing plate to Linkert carburetors.

more …

J-Slot Rivets and Tool for Backing Plate

Rivets and tool to replace lost or worn rivets on all J-slot type Linkert air cleaner backing plates.

more …

Seal Washers for IOE Intake Nipples

more …

Seal Rings for Manifold

more …

PEEK Super Seal Rings for Schebler Manifolds

These are the seals many of you have heard about, which will once and for all cure the notorious intake leaks of old manifolds. They are machined from PEEK (polyetheretherketone), a thermoplastic with a melting point of 650°F (343°C). Compared to brass seals this material has superior creep resistance and seal properties and can sustain large stresses over a long service life without significant extrusion.

more …

PEEK Super Seal Rings for Linkert Manifolds

These are the seals many of you have heard about, which will once and for all cure the notorious intake leaks of old manifolds. They are machined from PEEK (polyetheretherketone), a thermoplastic with a melting point of 650°F (343°C). Compared to brass seals this material has superior creep resistance and seal properties and can sustain large stresses over a long service life without significant extrusion.

more …

Mounting Screws for Schebler Carburetors

Stock replacement screws to fasten the Schebler carburetor to the intake manifold.

more …

Accessories

Gaskets