 Shop Carburetor and Injection Manifolds Linkert Carburetors

Accessories



Accessories

Manifold Packing Nuts

Manifold Packing Nuts

Authentic reproductions of the stock manifold packing nuts as used from 1930–up.

Reproductions of the original threaded manifold nipples for cylinders and heads.

Rivets for Intake Nipples

Rivets for Intake Nipples

Perfect duplicates of the rivets used to secure the inlet manifold nipples.

Bates O-Ring Manifold Clamps

Bates O-Ring Manifold Clamps

These manifold clamps are cast from brass and precision-machined. The groove for the O-ring is exactly shaped and positioned where it is supposed to be for a perfect seal. Top notch quality! Delivered with a set of classic looking hex head screws.

Knucklehead/Panhead Manifold Nipple Conversion Kit

Knucklehead/Panhead Manifold Nipple Conversion Kit

To convert 1940–54 Knucklehead/Panhead cylinder head inlet fittings from plumber style to o-ring style manifold.

Brass Rubberband Manifold Clamps

Brass Rubberband Manifold Clamps

Aircraft Style O-Ring Manifold Clamps

Aircraft Style O-Ring Manifold Clamps

Aircraft-quality manifold clamps which provide a tight and strong fixation of the carburetor without extra support.

Aircraft Style Rubberband Manifold Clamps

Aircraft Style Rubberband Manifold Clamps

Aircraft-quality manifold clamps for Shovelhead Big Twin and Sportster models 1979-85.

O-Ring Manifold Clamps

O-Ring Manifold Clamps

Rubberband Manifold Clamps

Rubberband Manifold Clamps

S&S O-Ring Manifold Clamps

S&S O-Ring Manifold Clamps

High quality intake manifold clamps to replace the flimsy and troublesome stock clamps. They use a curved 10-24 threaded T-bolt with plated steel aircraft hex locknut.

S&S Rubberband Manifold Clamps

S&S Rubberband Manifold Clamps

High quality intake manifold clamps to replace the flimsy and troublesome stock clamps. They use a curved 10-24 threaded T-bolt with plated steel aircraft hex locknut.

Custom O-Ring Manifold Clamps

Custom O-Ring Manifold Clamps

Economically priced manifold clamps. Solid two-piece construction complete.

Custom Rubberband Manifold Clamps

Custom Rubberband Manifold Clamps

Economically priced manifold clamps. Solid two-piece construction complete.

Bates Manifold Clamp Bolts

Bates Manifold Clamp Bolts

Instant period appearance. Add some classic style to your manifold clamps and replace the common socket head bolts with these authentic looking hex head bolts.

Bates Manifold Adapter Rings

Bates Manifold Adapter Rings

Combining an O-ring manifold with rubberband heads or vice versa leaves a gap, which can be easily bridged with these adapter rings. This will create a good surface for your new rubberbands.

Carburetor Spacers for Linkert Carburetors

Carburetor Spacers for Linkert Carburetors

This spacer for 3-bolt Linkert carburetor moves the carburetor further out to create more distance from the hot cylinders. The proximity to the hot cylinders could lead to vapor lock of the fuel in the carburetor or fuel lines. Poor throttle response and difficult restarting are usually the result. In contrast to the Big Twin Sidevalve models, where the intake manifold was lenghtened in 1939, the 45"/750cc models used this adapter from 1941 until the manifold was lenghtened in 1943. On WLD models 1941-1942 the manifold remained short.

The Cyclery Carburetor Spacers

The Cyclery Carburetor Spacers

There are situations where the carburetor, notably the float bowl, lacks space to clear cooling fins, oil lines or other engine components. This is where these spacers come in handy as they bolt between the manifold and carburetor to postion your 3-bolt Schebler or Linkert further outside.

CHP Linkert 3-Bolt Insulator Blocks

CHP Linkert 3-Bolt Insulator Blocks

Thermal insulator block for Linkert M-series 3-bolt carburetors and Schebler DLX that mounts between the carburetor and the manifold. Included are 2 O-rings, as well as a spacer that fills the recess on stock manifolds and eliminates the cavities between the manifold and the insulator block.

CHP Linkert 4-Bolt Insulator Blocks

CHP Linkert 4-Bolt Insulator Blocks

Cala's version of the thermal insulator first used on Panheads. Instead of being used between two gaskets it features a double o-ring seal thus providing a superior seal between manifold and carburetor.
Fits any Linkert 4 bolt application.

James Gaskets Linkert 4-Bolt Insulator Blocks

James Gaskets Linkert 4-Bolt Insulator Blocks

Thermal insulator blocks for Linkert carburetors as used by the Factory on Panheads, however it will fit all Linkert applications using the 4 bolt mounting flange. Must use two gaskets.

Panhead Weld-in Intake Nipples

Panhead Weld-in Intake Nipples

For 1948-54 Panhead heads with stripped threads these aluminum nipples can be welded into intake port. For O-ring manifolds.

Mounting Bolt Kits for Linkert Carburetors

Mounting Bolt Kits for Linkert Carburetors

Reproductions of the stock hex head bolts to fasten Linkert carburetors to the manifold.

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com