We use cookies for analytics, advertising and to improve our site. To find out more see our privacy policy.
Shop Fork
Fork Tubes

Fork Tubes

Show-Chromed Fork Tubes for Harleys
Show-Chromed Fork Tubes for Harleys
Fork tubes for almost any Harley with a show-chromed finish, available in different lengths.
more …
Franks Forks Hard-Chromed Fork Tubes
Franks Forks Hard-Chromed Fork Tubes
Steel fork tubes in standard length and oversizes up to +12” for various Harley models. The tubes are cylindrical ground before they get a hard chrome coat.
more …
Hard-Chromed Fork Tubes
Hard-Chromed Fork Tubes
Hard-chromed reproductions of the standard fork tubes of various Harley models at an affordable price. The tubes are ready to install with OEM threads, for OEM damper units. The clearance should be checked.
more …
Fork Tube Plugs for FL(H) and Wide Glide Forks
Fork Tube Plugs for FL(H) and Wide Glide Forks
more …
Fork Brace Caps for Fork Tubes
Fork Brace Caps for Fork Tubes
Cap bolts for the slider tubes of wide style forks from 1949 on.
more …
Fork Tube Plugs FX and XL
Fork Tube Plugs FX and XL
more …
Piston Rods and Spring Retainers FX and XL
Piston Rods and Spring Retainers FX and XL
Stock replacement retainers for fork piston rod and springs which fit K-Model, early Sportster and Super Glides.
more …
Lowbrow Low Profile Fork Tube Plugs
Lowbrow Low Profile Fork Tube Plugs
These low profile fork caps fit standard Harley 39mm front ends and are half the height of the stock caps. They are specifically convenient for Sportster 48 models that have integrated risers in their top tree. The stock caps are too tall and don't allow for a handlebar with a wider base. They feature a broached 1/2" hex for easy removal.
more …
Fork Tube Extensions
Fork Tube Extensions
These 15 mm extensions give you more ground clearance at the foot pegs which is of big advantage in faster turns. Made from stainless steel they simply screw into the fork tube top and get clamped with the upper triple tree.
more …
Fork Boots
Fork Boots
These rubber fork boots fit over fork sliders and tubes and protect from dust and dirt.
more …
Fork Dampers for OEM Hydraulic Forks
Fork Dampers for OEM Hydraulic Forks
more …
Fork Bushings
Fork Bushings
Selection of fork slider bushings for the replacement of your worn stock parts.
more …
Bottom Screw for Showa Forks
Bottom Screw for Showa Forks
more …
Shims for Fork Tube Dampers
Shims for Fork Tube Dampers
Used to adjust the clearance between snap ring and lower damper bushing. Required number and procedure as per manuals.
more …
Rebound Springs for Showa Forks
Rebound Springs for Showa Forks
more …
Snap Rings for Fork Tubes and Dampers
Snap Rings for Fork Tubes and Dampers
more …

Tubes for conventional Harley-Davidson telescopic forks.

Fork tubes dip into the sliders and guide the fork springs. They support the front end of the motorcycle and are connected to the steering head via the triple clamps, and they transmit steering movements 1:1 to the front wheel. To reduce break-loose torque during compression, the tubes are ground and chrome-plated.

Product range

Our bright chrome fork tubes are available in various lengths and popular diameters for Harley-Davidson models such as Hydra-Glide, Duo-Glide, Sportster, Softail, Touring and Dyna. To simplify the selection, we divide the tubes by diameters and model groups, below which you will find the different lengths. For the individual model groups - i.e. Sportster, FX, Dyna, Softail and Tourer of various model year groups - you will also find brief information on the original lengths of common models. Since Harley-Davidson OEM tubes differ from model to model sometimes only by a few millimeters in length, the exact original lengths are not available for all models. So in individual cases, unfortunately, you have to opt for longer or shorter pipes.

Caution: shorter or longer (than original) tubes may change the steering head angle and caster. Thus they directly influence handling and rideability of your Harley, and in case of extreme length definitely the riding safety, too.

Accessories and small parts

For tubes to function properly in the front fork, you will of course need additional parts such as fork dampers, fork springs, fork tube bolts and filler bolts. Rubber boots can support the fork seals and keep dirt away from the tubes. And besides, they look cool …

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com