Login

I forgot my password? Create account
Brands A-Z
Colony
A B C D E F G H I J K L M N O P R S T U V W Y Z

Colony

The brand Colony

… does not only stand for excellent reproductions of screws and bolts for Harley-Davidson motorcycles. Since its foundation in 1969 it stands for a - meanwhile - 4000 different kits broad selection of small parts, replacement parts, and accessory parts for Harleys - and they're continiously enhacing their range. Especially in their early years Harley-Davidson did not always stick to SAE regulations, but used it own standards for threads and surfaces. This is why Colony parts are rather produced in house when they're not available elsewhere in necessary quality. Colony is renowned for excellent service, quality, fitment and authenticity. This is what made them the first choice for workshops and restorers all around the Harley world.

The selection is outrageous

and comprises parts for Harley-Davidson models from 1911 to our days. Colony does not only offer goods that are suitable as original manufacturing replacement but also Custom Dress-up parts for the later models.

Colony - Where excellence Is Standard

At the same time, the completeness of the kits and the orientation to the original always impresses. Whatever square bolt heads or nuts, rare countersink angles - those from a Colony kit do fit. Be it tab and lock washers, wire eyelets, insulating washers, clips, pins or springs … what ever is needed is part of the kit. So, during all those years the W&W crews has been used to rely on Colony kits and bits.

Visit Website

Products by Colony in our web shop:

Switch Assembly Mounting Bolts
Switch Assembly Mounting Bolts
Authentic duplicates of the switch assembly fastening bolts.
more …
Ignition Switch Mounting Kits →1946
Ignition Switch Mounting Kits →1946
more …
Oil Pressure Switch Fittings
Oil Pressure Switch Fittings
Accurate reproduction of the oil pressure switch nipples as used on oil pumps of 1939-1969 Big Twins.
more …
Gasket Kits for Springer Fender Lights
Gasket Kits for Springer Fender Lights
more …
Repair Kit for Spotlights 1938-1961
Repair Kit for Spotlights 1938-1961
Rebuild kit for original "Guide" Spotlights as used on 1938-1961 Harley models.
more …
Contact Pins for Toggle Switch
Contact Pins for Toggle Switch
Replacement pin and spring for worn parts in your light switch.
more …
Headlight Mounting Kits
Headlight Mounting Kits
more …
License Plate Mounting Kit
License Plate Mounting Kit
Chrome-plated hardware fits license plate brackets for upright mounted plates (like W&W #11-006) or taillamps with integrated license plate bracket (like Tombstone). Comes complete with two chrome-plated acorn nuts, two lock rings and two rubber washers.
more …
Spotlight Mounting Clamps for Springer Forks 1946-1957
Spotlight Mounting Clamps for Springer Forks 1946-1957
more …
Replacement Parts for Delco Remy Horns
Replacement Parts for Delco Remy Horns
more …
Spotlight Bracket Nut Kits for Springer forks
Spotlight Bracket Nut Kits for Springer forks
Accurate reproductions of the special shoulder nuts and washers.
more …
Generator Shims and Strap Hardware
Generator Shims and Strap Hardware
Accurate reproductions of the shims and strap hardware for the 32E generator. The shims are used to establish the correct gear engagement of the generator gears.
more …
Mounting Parts for Trumpet/Jubilee Style Horns
Mounting Parts for Trumpet/Jubilee Style Horns
Small parts for mounting Trumpet/Jubilee style horns to the engine case.
more …
Screw Kits for 32E Generator
Screw Kits for 32E Generator
more …
Spotlight Bracket Hardware Kits for Hydra/Electra Glide forks
Spotlight Bracket Hardware Kits for Hydra/Electra Glide forks
Accurate reproductions of the bolts, spacers and washers to mount the left and right spotlight brackets.
more …
Timer Cable Clamps
Timer Cable Clamps
Accurate reproductions of the lower timer cable clamps for 1936-64 Big Twins.
more …
Ignition Wire Clips
Ignition Wire Clips
Reproductions of the original spring steel clips which help to accurately route the front ignition wire. They install to the upper motor mount, on OHV models with the choke lever stud.
more …
Colony Starter Shaft Nut and Spacer Kit for FL 1965-1969
Colony Starter Shaft Nut and Spacer Kit for FL 1965-1969
Original FL 1965-1969 primary covers are hard to come by or in bad condition. Tryinf to replace a →1969 primary cover with the 1970→ part is self-evident. But the starter shafts of FL models 1965-1969 are 7mm shorter than the starter shafts of 1970 and later FL models. This kit provides a means to close this gap and consists in a longer spacer and nut. It replaces the one-part starter shaft nut 31530-65.
more …
Magneto Ground Terminal Kits
Magneto Ground Terminal Kits
Ground terminal kits for XLCH models 1958-69 with OEM magnetos. Includes all necessary components and also fits bikes with Fairbanks, Morris and Hunt magnetos.
more …
Magneto Vent Covers
Magneto Vent Covers
To prevent moisture from accumulating inside the magneto, a vent cover has been attached to the side of the housing. If this cover is missing, you can retrofit your magneto with this kit and save yourself the hassle of opening the magneto cover in case of starting problems. Was used as standard on all XLCH 1958-1969 with Fairbanks-Morse magneto, but also fits Morris and Hunt magnetos.
more …
Circuit Breaker to Coil Wire Assembly
Circuit Breaker to Coil Wire Assembly
Accurate reproductions of the complete wire assemblies with terminal post as used on 1936-1964 models.
more …
Timer Adjuster Plate 1947-1964
Timer Adjuster Plate 1947-1964
Authentic reproduction of the timer adjuster plate. Correctly made from spring steel.
more …
Timer Adjusting Stud
Timer Adjusting Stud
Accurate reproductions of the circuit breaker adjusting stud and nut.
more …
Breaker Point Adjuster Screws
Breaker Point Adjuster Screws
Special eccentric screw for the adjustment of breaker points.
more …
Coil and Cover Studs for K-Models and Sportster
Coil and Cover Studs for K-Models and Sportster
Reproductions of the special hex studs to mount the spark coil and its related cover to the frame.
more …
Circuit Breaker Post Rebuild Kit
Circuit Breaker Post Rebuild Kit
Stop! Don't throw your good old ignition timer away! If the circuit breaker post is missing or if the insulation is damaged, this kit allows you to accurately repair it. The kits contain all necessary small parts plus an installation tool for the post. Exact reproduction.
more …
Cat Eye Dash Base Restauration Kit
Cat Eye Dash Base Restauration Kit
Complete OEM style hardware required to restore the instrument panel base.
more …
Cat Eye Panel Light Knobs
Cat Eye Panel Light Knobs
Precise reproductions of the stock Cateye panel light knobs. The early knobs are domed, the later ones feature flat tops.
more …
Mounting Kit for Fat Bob Speedometer 1936-1967
Mounting Kit for Fat Bob Speedometer 1936-1967
more …
Hydra Glide Riser Bolts
Hydra Glide Riser Bolts
Accurate reproductions of the Hydra Glide riser mounting bolts and lock nuts as used on 1949-1959 Panheads.
more …
Handlebar End Screws for Models 1910-1921
Handlebar End Screws for Models 1910-1921
Perfect reproduction of the handlebar end screws used on models from 1910-1921.
more …
Handlebar End Screws for Models 1922-1930 and 1937-1948
Handlebar End Screws for Models 1922-1930 and 1937-1948
Perfect reproduction of the handlebar end screws used on models from 1922-1948.
more …
Screw Kits for Hand Brake Control 1928-1940
Screw Kits for Hand Brake Control 1928-1940
This is the correct hardware for your 1928-1940 hand brake lever. Includes the special spring washer.
more …
Handlebar End Screws for Models 1931-1939
Handlebar End Screws for Models 1931-1939
more …
Handlebar Plungers for Models 1931-1939
Handlebar Plungers for Models 1931-1939
more …
Screw Kits for 58 and 65A Generators
Screw Kits for 58 and 65A Generators
more …
Plunger Pins and Roller Repair Kits 1910-1948
Plunger Pins and Roller Repair Kits 1910-1948
These kits include all stock replacement parts which are essential for the restauration of your internal throttle and timer control plungers. Each kit includes rollers, pins and other small parts as pictured.
more …
Repair Kit for Skull Panel Light Switch
Repair Kit for Skull Panel Light Switch
Precise reproductions of the stock Skull panel light switch parts.
more …
Repair Kit for Cat Eye Panel Light Switch
Repair Kit for Cat Eye Panel Light Switch
Precise reproductions of the stock Cateye panel light switch parts screws.
more …
Steering Head Bearings for Singles and 45
Steering Head Bearings for Singles and 45"/750cc 1930-1939
more …
Replacement Parts for Rockers
Replacement Parts for Rockers
more …
Plunger Pins and Roller Repair Kits 1953-1974
Plunger Pins and Roller Repair Kits 1953-1974
These kits include all stock replacement parts which are essential for the restauration of your internal throttle and timer control plungers. Each kit includes rollers, pins and other small parts as pictured.
more …
Handlebar Pinch Bolts
Handlebar Pinch Bolts
more …
Fork Clamp Bolt Kits for OEM I-Beam Forks
Fork Clamp Bolt Kits for OEM I-Beam Forks
In addition to clamping the upper fork clamps of I-Beam forks, these bolts also act as mounting points for the V-shaped brackets of 1929-1936 switch assemblies.
more …
Repair Kit for Hand Brake and Clutch Levers 1941-1964
Repair Kit for Hand Brake and Clutch Levers 1941-1964
Repair Kit to fix worn out hand brake and clutch lever pivot holes on 1941-1964 levers. Use a 7/16“ drill to open the holes to correct size and put in the bushings.
more …
Repair Kits for Rockers
Repair Kits for Rockers
Repair kits with shafts, bushings nuts and washer for the restoration of Springer fork rockers. The selection includes complete kits for a set of two rockers and kits for individual rocker shafts.
more …
Grommets for Delco Type Regulator 12V
Grommets for Delco Type Regulator 12V
Replacements for the worn grommets on your 12 V Delco Type regulator.
more …
Mounting Screws for Hydra Glide Fork Covers
Mounting Screws for Hydra Glide Fork Covers
OEM Phillips type mounting screws to fasten fork covers on Hydra Glide forks. Also fit K/XL models 1952-1970 and Servi-Car 1958-1959.
more …
Stem Nut and Cover Kit for Wide Forks
Stem Nut and Cover Kit for Wide Forks
This handy kit comprises the stock nut and a nice stainless cover for your fork stem. Easy installation.
more …
Fork Bracket Bolt and Clip for Adjustable Forks
Fork Bracket Bolt and Clip for Adjustable Forks
Reproduction of the original parkerized fork bracket bolt, castle nut, cotter pin and cad plated clip, used on 1950-early 1977 FL(H)-models with adjustable front forks.
more …
Mounting Kits for Front Wheel Stands
Mounting Kits for Front Wheel Stands
Accurate reproductions of the hardware required to mount stock front wheel stands.
more …
Upper Tree Bolts for Adjustable Forks
Upper Tree Bolts for Adjustable Forks
Bolt kit for the upper triple tree of adjustable Wide Glide forks
more …
Fork Tube Cover Screws for FL(H)
Fork Tube Cover Screws for FL(H)
more …
Stem Bolt and Cover for Dyna, XL, FLST 1986→
Stem Bolt and Cover for Dyna, XL, FLST 1986→
Stock replacement stem bolt and matching chromed Custom cover to enhance your upper triple tree.
more …
Adjuster Screw for Steering Damper FL(H)
Adjuster Screw for Steering Damper FL(H)
Reproduction of the original adjusting screw and locknut of the steering damper used on FL models 1960-1984.
more …
Knob for Steering Damper K/XL/FL
Knob for Steering Damper K/XL/FL
Reproduction of the aluminium steering damper knob used on K,KH models and Sportster 1952-1966 (except 1959 CH), Servi Car 1960 up and FL(H) models 1960-1984.
more …
Replacement Parts for Steering Damper K/XL
Replacement Parts for Steering Damper K/XL
more …
Wire terminals for Headlamp, Horn & Spotlights
Wire terminals for Headlamp, Horn & Spotlights
Accurate reproduction of insulators and hardware for the headlamp/horn bracket on all models 1945-1957 with Springer forks.
more …
Steering Head Nuts for Classic Springer Forks
Steering Head Nuts for Classic Springer Forks
more …
Fork Stem Bolt and Cover Kits XL
Fork Stem Bolt and Cover Kits XL
more …
Acorn Steering Head Nuts
Acorn Steering Head Nuts
more …
Windshield Apron Coil Clips
Windshield Apron Coil Clips
These clips fasten the apron to the frame of the windshield by clamping on the sewn-in coils.
more …
Brake Cable Lubricators
Brake Cable Lubricators
Precise reproduction of the stock cable oiler with clip for pre-war models. Available for original and aftermarket brake cables. Fits later models, too.
more …
Brake Cable Felt Washer Packing Nut
Brake Cable Felt Washer Packing Nut
Reproduction of the stock brake cable packing nut with felt. Well oiled, the felt ring prevents dirt and water from entering the coil for a longer service life.
more …
Mounting Bolts for All Plastic Windshields
Mounting Bolts for All Plastic Windshields
Factory style mounting bolts to attach the support brackets to the windshield.
more …
Colony Top Plugs for Classic Springer Forks
Colony Top Plugs for Classic Springer Forks
If period correct is not an issue for you and you already have other bolts of this type on your bike, then these Allen style custom plugs might be your choice. They fit W&W Classic Springer and Cannonball I-Beam forks with legs that are threaded at the upper end.
more …
Colony Grease Nipples 1939→
Colony Grease Nipples 1939→
Accurate reproductions of the grease fittings for Star hubs, Springer rockers and many other applications. Sold as 6 packs.
more …
Windshield Screw Kits
Windshield Screw Kits
Reproductions of the Original Phillips head screws used to mount the window to the chrome straps.
more …
End Plugs for OEM Handlebar Grips 1953-1961
End Plugs for OEM Handlebar Grips 1953-1961
Handlebars up to 1974 used grips with open ends to reach the handlebar end screws with a special screwdriver. With these outwardly curved plugs, the grip holes can be closed discreetly and elegantly.
more …
Spring Kits for Steering Damper FL(H)
Spring Kits for Steering Damper FL(H)
more …
Mounting Kits for Rear Wheel Stands
Mounting Kits for Rear Wheel Stands
Accurate reproductions of the hardware required to mount stock rear wheel stands.
more …
Steering Damper Upper End Kits
Steering Damper Upper End Kits
Kits which contain all upper end small parts for the steering dampers of 1936-up Twins with Springer forks.
more …
Center Stand Mounting Kits 1958-1981
Center Stand Mounting Kits 1958-1981
more …
Mounting Kits for Footclutch Pedals WR and G Models
Mounting Kits for Footclutch Pedals WR and G Models
Precise reproduction of the studs used to mount footclutch pedals of Servi-Cars and WR racing models. The kit comprises foot clutch lever stud, nut, lockwasher, grease nipple and a cotter pin to secure the cluch cable end piece. Original clutch pedal pivot ends are often worn out, therefore a kit with oversize stud is available, too.
more …
Shifter Guide Nuts 1916-1936
Shifter Guide Nuts 1916-1936
more …
Threaded Bungs for Tank Top Filler Strips 45
Threaded Bungs for Tank Top Filler Strips 45"/750cc
If the bungs, for attaching the tank top filler strip to 45"/750cc frames, have been damaged or removed, they can be replaced with these weld-on flanged steel bungs.
more …
Fork Brace Caps for Fork Tubes
Fork Brace Caps for Fork Tubes
Cap bolts for the slider tubes of wide style forks from 1949 on.
more …
Shifter Lever Pivot Bolts 1937-1965
Shifter Lever Pivot Bolts 1937-1965
Stock replacement pivot bolts which replace your worn factory parts and take the wobble from your handshift lever for a more positive shifting of the transmission. Each kit comes with the required nuts and washers. The 1947→ pivot bolts include a bushing and can be retrofitted on the earlier models.
more …
Replacement Bushings for Brake Pedal Shaft
Replacement Bushings for Brake Pedal Shaft
more …
Piston Rods and Spring Retainers FX and XL
Piston Rods and Spring Retainers FX and XL
Stock replacement retainers for fork piston rod and springs which fit K-Model, early Sportster and Super Glides.
more …
Shifter Guide Mounting Screws
Shifter Guide Mounting Screws
Slotted oval head screws as used on 1937–46 models to mount the shifter gate to the gas tank.
more …
Shifter Rod End Bolts 1930-1936
Shifter Rod End Bolts 1930-1936
This shoulder bolt and spacer are used on the rear handshift rod end.
more …
Footboard Hinge Rivets
Footboard Hinge Rivets
Reproductions of the special rivets used to fasten rectangular and half moon footboards to the hinge brackets.
more …
Shifter Rod End Bolts 1936-1964
Shifter Rod End Bolts 1936-1964
This shoulder bolt was used on the rod ends of handshift and footshift rod ends.
more …
Brake Rod Mounting Kits Big Twins 1930-1957
Brake Rod Mounting Kits Big Twins 1930-1957
These kits comprise all pins, cotter pins and washers to install both brake rods, including the special spring washer for the rear clevis.
more …
Brake Lever Studs
Brake Lever Studs
OEM-style, heat treated and precision ground studs with stock mounting hardware. Also available oversized (18,25 mm) for those sloppy brake levers. The 1936-38 version is threaded on both ends and can be used on later model backing plates (rivet type) for easy installation.
more …
Jiffy Stand U-Style Frame Clamp
Jiffy Stand U-Style Frame Clamp
Jiffy Stand U-style frame clamp for 45”/750cc Solo 1932-1952 and V series 1930-1936. Also used for coil mount on V-models 1930-1933.
more …
Friction Parts for Foot Clutch Lever
Friction Parts for Foot Clutch Lever
These kits comprise all small parts to put your foot clutch rocker back into service. Complete with friction washer, spring washer(s), lock washer(s) and special nut.
more …
Replacement Bolts for Frame Clamp Shifter Shaft 1915-1929
Replacement Bolts for Frame Clamp Shifter Shaft 1915-1929
more …
Footboard Mounting Kits 1914-1928
Footboard Mounting Kits 1914-1928
Reproductions of the stock footboard mounting brackets for vintage models. Each kit includes one stud, nut and washer.
more …
Brake Shackle Bolts
Brake Shackle Bolts
more …
Brake Rod Mounting Kits 45”/750 cc Flathead
Brake Rod Mounting Kits 45”/750 cc Flathead
These kits comprise all pins, cotter pins and washers to install both brake rods, including the special spring washer for the rear clevis.
more …
Footboard Mounting Kits Big Twin 1930-1964
Footboard Mounting Kits Big Twin 1930-1964
Complete and accurate reproductions of the stock footboard mounting brackets for classic Big Twins. These kits are parkerized just like the originals and include all nuts studs and bolts to install both floorboards on the bike.
more …
Mounting Kit for Master Cylinder FLST late 1987-1999
Mounting Kit for Master Cylinder FLST late 1987-1999
Special stud and bolt kit for mounting your late 1987-1999 master cylinder.
more …
Brake Rotor Bolts for 1/4” Holes with Conical Counterbore
Brake Rotor Bolts for 1/4” Holes with Conical Counterbore
more …
Brake Rotor Bolts for 5/16” Holes with Conical Counterbore
Brake Rotor Bolts for 5/16” Holes with Conical Counterbore
more …
Brake Rotor Bolts for 5/16” Holes with Flat Counterbore
Brake Rotor Bolts for 5/16” Holes with Flat Counterbore
more …
Footboard Mounting Bolts
Footboard Mounting Bolts
Reproductions of the original footboard mounting bolts.
more …
Wheel Brake Cylinder Mounting Kits
Wheel Brake Cylinder Mounting Kits
more …
Axle Bushing Grease Fitting
Axle Bushing Grease Fitting
more …
Brake Rotor Bolts for 3/8” Holes with Flat Counterbore
Brake Rotor Bolts for 3/8” Holes with Flat Counterbore
more …
Brake Rotor Bolts for 3/8” Holes with Conical Counterbore
Brake Rotor Bolts for 3/8” Holes with Conical Counterbore
more …
Brake Rotor Bolts for 7/16” Holes with Conical Counterbore
Brake Rotor Bolts for 7/16” Holes with Conical Counterbore
more …
Mounting Kits for Footboard Support Rods W Models and Servi-Car
Mounting Kits for Footboard Support Rods W Models and Servi-Car
Consists of 3 special nuts and small parts, for front and rear rod.
more …
Grease Nipple Washers
Grease Nipple Washers
The MoCo often used small washers under grease nipples so the hex didn’t bite into the mounting surface. Here are the replacements. They fit all grease nipples with 5/16”-32 thread.
more …
Pivot Stud
Pivot Stud
more …
Clutch Cable Adjusting Sleeves for K/XL 1953-early 1971
Clutch Cable Adjusting Sleeves for K/XL 1953-early 1971
Reproduction of the clutch cable adjusting sleeve with lock pin, which screws on the bare cable coil.
more …
Wire Clips
Wire Clips
Reproductions of the original spring steel clips which help to accurately route the stock wiring harness.
more …
Colony Axle Nuts and Spacer Kits for Softail 1984-2017
Colony Axle Nuts and Spacer Kits for Softail 1984-2017
Chromed axle nuts spacer kits with all necessary components for Softail models from 1984-2017.
more …
Screw Kit for Star Hub 1936-1966
Screw Kit for Star Hub 1936-1966
more …
Cup Washer for Pivot Stud Big Twin 1938-1957
Cup Washer for Pivot Stud Big Twin 1938-1957
more …
Mounting Bolts for Brake Drum
Mounting Bolts for Brake Drum
more …
Pivot stud complete
Pivot stud complete
more …
Tube Straps OEM Type
Tube Straps OEM Type
Exact duplicates of the original parts as used by the factory 1952-1971 on oil and brake lines. Work fine for wires as well.
more …
Brake Anchor and Pivot Bolt Kit
Brake Anchor and Pivot Bolt Kit
more …
Clevis Pins for Brake Cable Clamps
Clevis Pins for Brake Cable Clamps
more …
Mounting Kit for Front Mud Flaps 1932-1949
Mounting Kit for Front Mud Flaps 1932-1949
Parkerized reproduction of the front mud flap mounting screws, washers and nuts as used on Big Twins and 45“ 1932-1949.
more …
Mounting Kits for Rear Fenders
Mounting Kits for Rear Fenders
Detailed kits consisting of reproduction bolts, nuts and lockwashers to mount original or reproduction fenders on the struts and frame.
more …
Rivets for Fenders and Tool
Rivets for Fenders and Tool
Authentic truss head rivets and matching installation tool. Used to replace the fender to brace and hinge rivets.
more …
Control Coil Brackets 1936-1948
Control Coil Brackets 1936-1948
more …
Brace Bolts for Rear Fender End
Brace Bolts for Rear Fender End
Accurate reproductions of the stock carriage bolts and nuts to fasten the rear fender hinged end to the fender braces.
more …
Control Coil End Plugs 1910-1974
Control Coil End Plugs 1910-1974
These control coil end plugs are screwed onto the control coils of the internally routed throttle and ignition cables. Using a set screw, the coils are then fixed from the outside through the handlebar.
more …
Fender Hinge Repair Kits
Fender Hinge Repair Kits
Pin and rivets to repair worn fender end hinges.
more …
Lower Tank Mounting for Models 1910-1936
Lower Tank Mounting for Models 1910-1936
Hardware kits to mount the tank to the lower frame tube.
more …
Gas Strainers for Linkert Carburetors
Gas Strainers for Linkert Carburetors
Exact reproductions of the gas strainer used in conjunction with rigid fuel lines.
more …
Upper Tank Mounting for Models 1918-1952
Upper Tank Mounting for Models 1918-1952
Hardware kits to mount the tank to the upper frame tube.
more …
Tank Mounting 45”/750 cc Flathead
Tank Mounting 45”/750 cc Flathead
Nuts and bolts to fasten gas and oil tank combination on 45”/750 cc Flatheads.
more …
Gas Tank Mounting Big Twin 1937-1975
Gas Tank Mounting Big Twin 1937-1975
These kits contain exact duplicates of fasteners used to mount stock gas tanks on original frames.
more …
Extension Knobs for Fuel Valves
Extension Knobs for Fuel Valves
These knobs allow easier operation of the original pre-66 early style shut-off valve.
more …
Tank Buffers 1909-1947
Tank Buffers 1909-1947
These tank buffers were placed on the frame tube to stop the tank halves from chafing on the frame and to protect the wiring harness and oil lines (1936/1937) from being pinched.
more …
Gas Tank Mounting K/XL 1952-1981
Gas Tank Mounting K/XL 1952-1981
These kits include all the necessary components to mount the gastanks of K-models and Sportster from 1952-1981.
more …
Spring Mounting Kits for Buddy Seats 1965→
Spring Mounting Kits for Buddy Seats 1965→
Reproductions of the special bolts, washers and nuts for Buddy Seat auxiliary springs.
more …
Fuel Filter Screen and Cap
Fuel Filter Screen and Cap
Reproductions of the fuel filter screen and cap used on Linkert fuel filters.
more …
Oil Tank Mounting Kits for Big Twin 1936-1964
Oil Tank Mounting Kits for Big Twin 1936-1964
Reproduction of all original screws, nuts and spacers to mount oil tanks of 1936–1964 Big Twin models.
more …
OEM Style Oil Tank Filler Cap and Gauge 1936-1964
OEM Style Oil Tank Filler Cap and Gauge 1936-1964
Accurate reproductions of the factory filler caps and dip sticks as used for stock Horseshoe style oil tanks.
more …
Bolts for Buddy Seat Spring Clips
Bolts for Buddy Seat Spring Clips
Reproductions of the special bolts and nuts for Buddy Seat spring clips. Kit is for one clip only.
more …
Hex Oil Tank Filler Cap and Gauge 1936-1964
Hex Oil Tank Filler Cap and Gauge 1936-1964
Custom oil tank filler cap and dipstick with chrome-plated hex head. Fits all stock H-D horseshoe oil tanks or similar aftermarket oil tanks.
more …
Magnetic Oil Tank Drain Plug Oversize
Magnetic Oil Tank Drain Plug Oversize
These plugs can be used on oil tanks which have their stripped factory threads re-tapped to an oversize thread.
more …
Oil Tank Mounting Kits for Sportster 1958-1978
Oil Tank Mounting Kits for Sportster 1958-1978
Reproductions of oil tank mounting kits used on Sportsters models throughout the years 1958-1978.
more …
Lock Nuts for Front Hub Bearing Cones 1916-1929
Lock Nuts for Front Hub Bearing Cones 1916-1929
Precise reproductions of the lock nuts for the hub bearing cones of front wheels.
more …
Oil Tank Mounting Brackets for Sportster 1958-1978
Oil Tank Mounting Brackets for Sportster 1958-1978
Reproductions of the oil tank brackets used on Sportster models throughout the years 1958-1978.
more …
Rubber Washers for Oil Tanks K/XL 1952-1966
Rubber Washers for Oil Tanks K/XL 1952-1966
These kits consisting of three inner and three outer rubber washers are needed to mount oil tanks on K/KH and XLH models 1952-1966.
more …
Colony Boot Guard Heat Shield
Colony Boot Guard Heat Shield
Accurate reproduction of the original boot guard which mounts on the rear exhaust pipe. Used as accessory on 1936-up Big Twin models.
more …
Exhaust Mounting Kits Rigid Frame
Exhaust Mounting Kits Rigid Frame
Complete kits of fasteners used to mount the exhaust system of rigid frame models.
more …
Mounting Screws for Schebler Carburetors
Mounting Screws for Schebler Carburetors
Stock replacement screws to fasten the Schebler carburetor to the intake manifold.
more …
Pin and Spring Kit for OEM Type Solo Seats
Pin and Spring Kit for OEM Type Solo Seats
Precise reproductions of the center pin and matching spring to secure the seat T to the spring post. High quality.
more …
Colony Exhaust Mounting Bolts for Shovelhead
Colony Exhaust Mounting Bolts for Shovelhead
Special exhaust pipe mounting bolts with locks to prevent them from coming lose due to vibrations.
more …
Fuel Hose Adapter Kits 1940-1965
Fuel Hose Adapter Kits 1940-1965
Conversion kits for original Fat Bob tanks with push-pull fuel valves of the 1940-1965 model years. Allows to replace the stock rigid fuel lines with 1/4” ID rubber or braided steel hose. After installation you can attach such hoses between the tanks and to the bottom seat of the fuel valve. A fitting for the carburetor is not included and must be ordered separately.
more …
Manifold Packing Nuts
Manifold Packing Nuts
Authentic reproductions of the stock manifold packing nuts as used from 1930–up.
more …
Colony Exhaust Port Nuts for Evolution and Later Engines
Colony Exhaust Port Nuts for Evolution and Later Engines
Mounting kit by Colony, consisting of 4 self-locking stock replacement nuts, to fix the exhaust header pipes on Evolution and later Engines.
more …
Front T-Bar Bushing for OEM Type Solo Seats
Front T-Bar Bushing for OEM Type Solo Seats
Precise reproductions of the front bushing kits as used in all HD seat T’s. High quality, made from hardened steel, with special bolt included.
more …
Linkert Air Cleaner Mounting Kit
Linkert Air Cleaner Mounting Kit
Reproductions of screws and lock plates to mount the air cleaner backing plate to Linkert carburetors.
more …
Seat Post Rods 1930-1980
Seat Post Rods 1930-1980
Seat post rod with guide, spacers and all nuts to restore or complete your worn original seat post. Also available extra long for those heavy riders who would like to install additional or longer springs.
more …
Rivets for Intake Nipples
Rivets for Intake Nipples
Perfect duplicates of the rivets used to secure the inlet manifold nipples.
more …
Low Speed Needle Lever Bolts for Schebler DLX and Linkert Carburetors
Low Speed Needle Lever Bolts for Schebler DLX and Linkert Carburetors
Shoulder bolt for the low speed needle lever.
more …
Guide Collars for Heavy Duty Springs
Guide Collars for Heavy Duty Springs
Duplicates of special spring guide collars as used for Heavy Duty spring sets for riders 230 lbs and over.
more …
1940-1954 Manifold Conversion
1940-1954 Manifold Conversion
Complete conversion kit for Knuckles and Pans from 1940–54. Replaces the stock threaded inlet nipples and manifold with O-ring adaptors and o-ring manifold.
more …
Screw Kit for OEM Style Air Horns
Screw Kit for OEM Style Air Horns
These are always missing or incorrect. Exact reproductions of the special screws and nuts to fasten the air intake cover to the backing plate.
more …
Colony Linkert Air Cleaner Screws
Colony Linkert Air Cleaner Screws
more …
Colony Mounting Kit for Air Cleaner Support Bracket for Sportster 1966-1978
Colony Mounting Kit for Air Cleaner Support Bracket for Sportster 1966-1978
more …
J-Slot Rivets and Tool for Backing Plate
J-Slot Rivets and Tool for Backing Plate
Rivets and tool to replace lost or worn rivets on all J-slot type Linkert air cleaner backing plates.
more …
Bendix/Keihin Air Cleaner Mounting Kit
Bendix/Keihin Air Cleaner Mounting Kit
This lock plate was stock on 1984-1985 models but is very useful to securely mount any air cleaner on bikes with Bendix and Keihin butterfly carburetors.
more …
Fittings for Rubber Oil Lines
Fittings for Rubber Oil Lines
WR style, one-piece solution when you want to run flexible oil lines. Can be used on all oil tanks, oil pumps and crankcases with 9/16"-24 fittings.
more …
Nuts for Crankcases: all Models 1911-1934
Nuts for Crankcases: all Models 1911-1934
more …
Mounting Bolt Kits for Linkert Carburetors
Mounting Bolt Kits for Linkert Carburetors
Reproductions of the stock hex head bolts to fasten Linkert carburetors to the manifold.
more …
Bolt Kits for Engine Cases: Flathead 750cc 1937→
Bolt Kits for Engine Cases: Flathead 750cc 1937→
more …
Grease Tubes for Main Bearing
Grease Tubes for Main Bearing
Accurate reproductions of the tube and alemite fitting for the main bearing of J and V-series transmissions.
more …
Screws for Bendix Style Oval Air Cleaner Cover
Screws for Bendix Style Oval Air Cleaner Cover
Special Phillips head screws to mount the cover of Bendix Style Oval Air Cleaners on the base plate.
more …
Bolt Kits for Engine Cases: K-Model
Bolt Kits for Engine Cases: K-Model
more …
Bolt Kits for Engine Cases: Flathead Big Twin
Bolt Kits for Engine Cases: Flathead Big Twin
more …
Screws for Bendix Air Cleaner Backing Plate
Screws for Bendix Air Cleaner Backing Plate
Special Phillips head screws to mount the air cleaner backing plate to carburetor and to mount the carb support to the backing plate.
more …
Stud Kits for Transmission Top Cover: IOE and V-Models 1915-1936
Stud Kits for Transmission Top Cover: IOE and V-Models 1915-1936
more …
Bolt Kits for Engine Cases: Knucklehead
Bolt Kits for Engine Cases: Knucklehead
more …
Motor Mount Studs for Panhead and Shovelhead
Motor Mount Studs for Panhead and Shovelhead
Reproductions of the stock upper motor mount studs with nuts and washers as used on Panhead and Shovelhead models.
more …
Stud Kits for Starter Cover: IOE and V-Models 1915-1936
Stud Kits for Starter Cover: IOE and V-Models 1915-1936
more …
Bolt Kits for Engine Cases: Panhead
Bolt Kits for Engine Cases: Panhead
more …
Motor Mount Bushings for K-Models
Motor Mount Bushings for K-Models
Reproductions of the original bushings used on K-model cylinder heads from 1952-1969.
more …
Transmission Cover Nuts 1915-1936
Transmission Cover Nuts 1915-1936
Special nuts (5/16-24x7/16) as used to mount the transmission covers and for various other applications.
more …
Bolt Kits for Engine Cases: Evolution Big Twin
Bolt Kits for Engine Cases: Evolution Big Twin
more …
Threaded Bushings for rear Motor Mount for Sportster 1962-1978
Threaded Bushings for rear Motor Mount for Sportster 1962-1978
Hex head threaded bushings for the rear motor mount of Sportster models.
more …
Colony Transmission Adjusting Screw 1925-1936
Colony Transmission Adjusting Screw 1925-1936
more …
Bolt Kits for Engine Cases: Twin Cam 88
Bolt Kits for Engine Cases: Twin Cam 88
more …
Transmission Filler Plugs for IOE and V Models
Transmission Filler Plugs for IOE and V Models
Reproduction of the transmission oil filler plug for all IOE and V-series models.
more …
Bolt Kits for Engine Cases: Sportster
Bolt Kits for Engine Cases: Sportster
more …
Timing Hole and Oil Drain Plugs OEM Replacement
Timing Hole and Oil Drain Plugs OEM Replacement
The crankcase timing hole plug and oil tank drain plug were identical parts for a long time on Harley-Davidson motorcycles.
more …
Nut Kits for Cylinder Base: Big Twin 1936-1977
Nut Kits for Cylinder Base: Big Twin 1936-1977
more …
Timing Hole/Drain Plugs Oversize
Timing Hole/Drain Plugs Oversize
These plugs can be used on cases which have their stripped factory threads re-tapped to an oversize thread.
more …
Nut Kits for Cylinder Base: 750cc, K and Sportster 1954-1985
Nut Kits for Cylinder Base: 750cc, K and Sportster 1954-1985
more …
Spring Tension Adjusting Nut 45”/750 cc 1940
Spring Tension Adjusting Nut 45”/750 cc 1940
Accurate, high quality reproduction of the clutch spring tension nut.
more …
Nut Kits for Cylinder Base: Big Twin 1978-1984
Nut Kits for Cylinder Base: Big Twin 1978-1984
more …
Adjuster Screw and Nut
Adjuster Screw and Nut
Accurate, high quality reproduction of the clutch rod adjuster screw and nut.
more …
Spring Tension Adjusting Nut
Spring Tension Adjusting Nut
Accurate, high quality reproduction of clutch spring tension nut with its lock ring washer.
more …
Clutch Hub Nut
Clutch Hub Nut
more …
Oil Seals for Sprocket Shaft: 45 cui/750 cc
Oil Seals for Sprocket Shaft: 45 cui/750 cc
more …
Clutch Hub Nut Kits
Clutch Hub Nut Kits
Complete reproduction part kit with nut, small parts and seal.
more …
Clutch Dome Cover Retainer Kits
Clutch Dome Cover Retainer Kits
All retainers and small parts to mount the dome cover to the clutch basket/sprocket.
more …
Repair Kit Release Lever Fulcrum
Repair Kit Release Lever Fulcrum
Rebuild kit to renew your worn/damaged release lever fulcrum.
more …
Repair Kits for Clutch release lever pivots
Repair Kits for Clutch release lever pivots
Rebuild kits to renew your worn/damaged pivot screws and bushings.
more …
Release Rod Seal and Spring Kits
Release Rod Seal and Spring Kits
more …
Release Rod Adjuster Screws
Release Rod Adjuster Screws
This kit includes authentic reproductions of the realease rod adjuster screw with lock nut and worm cover.
more …
Relief Tube Nipple for Singles 1926-1934 and D-Models
Relief Tube Nipple for Singles 1926-1934 and D-Models
more …
Grease Nipple
Grease Nipple
Special replacement grease nipple, which is pressed into the clutch release levers.
more …
Primary Chain Oilers for Big Twin 1939-1964
Primary Chain Oilers for Big Twin 1939-1964
Reproduction of the original breather tube. Oil mist from the crankcases and lubrication from the oil pump are directed to the primary chain through this tube.
more …
Rear Chain Guard Mounting Kit for 45” (750cc) Models
Rear Chain Guard Mounting Kit for 45” (750cc) Models
All hardware required to properly mount the rear chain guard on all 45" (750cc) Solo models 1936-52.
more …
Mounting Kits for Primary Chain Guards for VL and 45cui/750cc
Mounting Kits for Primary Chain Guards for VL and 45cui/750cc
more …
DeLuxe Secondary Chain and Belt Tensioner Kit
DeLuxe Secondary Chain and Belt Tensioner Kit
Chrome-plated axle adjuster kit for all 4-speed FL + FLH, FX + FXE and FXR + FXRS from 1973-up (except FLT) and Sportster 1979-up. Complete with end caps, nuts and Custom locknuts.
more …
Sportster Primary Cover Plugs OEM Type
Sportster Primary Cover Plugs OEM Type
Stock replacement oil filler and clutch adjusting caps for Sportster primary covers.
more …
Swingarm End Plates
Swingarm End Plates
more …
Axle Adjuster End Covers
Axle Adjuster End Covers
Chrome-plated end caps, with nuts and decorative locknuts. Fit all 4-speed Big Twins 1973-up (except FLT) and Sportster models 1979-up.
more …
Mounting Kits for Inner Primary Chain Guards for Big Twin 1937-1964
Mounting Kits for Inner Primary Chain Guards for Big Twin 1937-1964
more …
Lock Screws for Left Bearing Races
Lock Screws for Left Bearing Races
Set of three lock screws which are used to secure the left side crankcase bearing race.
more …
Primary Mounting Kit for Big Twin 1965-1969
Primary Mounting Kit for Big Twin 1965-1969
Complete mounting kit with reproductions of all necessary mounting parts to fasten the aluminum primary housing on Big Twins from 1965-1969.
more …
Primary Mounting Kits for FL/FX 1970-1985
Primary Mounting Kits for FL/FX 1970-1985
more …
Primary Cover Plugs for Panhead/Early Shovelhead
Primary Cover Plugs for Panhead/Early Shovelhead
Compensating sprocket servicing plug for 1965 Panhead and early 1966 Shovelhead primary covers.
more …
Screw Kits for Timer and Relay: 750cc
Screw Kits for Timer and Relay: 750cc
Reproductions of the mounting screws for ignition timers and relay base plate.
more …
Screw Kits for Timer and Relay: Big Twins 1936-1964
Screw Kits for Timer and Relay: Big Twins 1936-1964
Reproductions of the mounting screws for ignition timers and relay base plate from 1936–65. All screws are special HD 1/4”-24 threaded.
more …
Screw Kits for Timer Cover: Models 1970-1978
Screw Kits for Timer Cover: Models 1970-1978
more …
Screw Kits for Timer Cover: Models 1979-1999
Screw Kits for Timer Cover: Models 1979-1999
more …
Mounting Kits for Dash Cover FX
Mounting Kits for Dash Cover FX
more …
Screw Kits for Handlebar Clamp 1974-1981
Screw Kits for Handlebar Clamp 1974-1981
more …
Screw Kits for Handlebar Clamp 1982-1995
Screw Kits for Handlebar Clamp 1982-1995
more …
Screw Kits for Handlebar Clamp and Gauges FX 1983-1994
Screw Kits for Handlebar Clamp and Gauges FX 1983-1994
more …
Screw Kits for Handlebar Controls and Master Cylinder 1973-1981
Screw Kits for Handlebar Controls and Master Cylinder 1973-1981
more …
Colony Pushrods for Big Twins 1936-1983 and Sportster 1957-1985
Colony Pushrods for Big Twins 1936-1983 and Sportster 1957-1985
OEM replacement pushrods, made from aluminum. Wear surfaces are hardened steel.
more …
Mounting Kits for Jiffy Stand Big Twin 1936→
Mounting Kits for Jiffy Stand Big Twin 1936→
more …
Engine Skid Plate Mounting Kits for WLA/C
Engine Skid Plate Mounting Kits for WLA/C
more …
Leg Shield Mounting Kits for WLA/C
Leg Shield Mounting Kits for WLA/C
more …
Mounting Kits for Foot Brake Control Big Twins 1936-1971
Mounting Kits for Foot Brake Control Big Twins 1936-1971
more …
Colony Solid Lifter Kits for Panhead and Shovelhead
Colony Solid Lifter Kits for Panhead and Shovelhead
Solid lifter kits for all Big Twins from 1953–1985. These kits will solve all problems associated with hydraulic units and reduce valve train weight. Provide easy adjustment and improved engine characteristics.
more …
Stud Kits Rockerbox: Shovelhead
Stud Kits Rockerbox: Shovelhead
Complete set of rockerbox and motor mount studs for one cylinder head.
more …
Colony Show Bike Hardware Kits: Panhead
Colony Show Bike Hardware Kits: Panhead
The Colony Show Bike Kits. Unlike cheap imports Colony kits are made from the finest materials available and precision machined. They will replace almost every engine and transmission bolt with a shiny counterpart.
more …
Colony Show Bike Hardware Kits: Twin Cam
Colony Show Bike Hardware Kits: Twin Cam
The Colony Show Bike Kits. Unlike cheap imports Colony kits are made from the finest materials available and precision machined. They will replace almost every engine and transmission bolt with a shiny counterpart.
more …
Cap Style Nuts Chrome-plated
Cap Style Nuts Chrome-plated
more …
Colony Gaskets for Valve Spring Covers: Sidevalve Big Twins
Colony Gaskets for Valve Spring Covers: Sidevalve Big Twins
Gasket kits for Colony made valve spring covers with O-ring seal between upper and lower cover. These kits do not work with original covers.
more …
Clutch Cable Bracket for K Models and Sportster 1952-early 1970
Clutch Cable Bracket for K Models and Sportster 1952-early 1970
Reproduction of the clutch cable bracket which was attached to the front left frame tube on K Models 1952-1956 and Sportster models from 1957 to the early 1970s.
more …
Cylinder Head Stud and Nut Kits: 750cc Sidevalves with Cast Iron Heads
Cylinder Head Stud and Nut Kits: 750cc Sidevalves with Cast Iron Heads
Stock replacement stud and nut kits for 45”/750 cc Flatheads with cast iron cylinder heads.
more …
Cylinder Head Bolts Kits: 45
Cylinder Head Bolts Kits: 45"/750 cc Sidevalves with Aluminum Heads
more …
Cylinder Head Bolts Kits: 750cc and Big Twin Sidevalves with Cast Iron Heads
Cylinder Head Bolts Kits: 750cc and Big Twin Sidevalves with Cast Iron Heads
Stock replacement cylinder head bolt kits for Flatheads with cast iron cylinder heads. For 1929-1950 small 45”/750 cc Flatheads this is a Custom application to replace the stock studs and nuts.
more …
Valve Spring Covers for K-Models
Valve Spring Covers for K-Models
Accurate reproductions of the lower valve springs covers for K model Harleys.
more …
Retainers and Central Pushrod Cover Kits
Retainers and Central Pushrod Cover Kits
The upper retainer kits include four retainers, spring caps, springs, washers and gaskets. Length given below is retainer length.
more …
Cylinder Head Bolts Kits: Big Twin Flatheads with Aluminum Heads
Cylinder Head Bolts Kits: Big Twin Flatheads with Aluminum Heads
more …
Cylinder Head Bolts Kits: Knucklehead
Cylinder Head Bolts Kits: Knucklehead
more …
Cylinder Head Bolts Kits: Panhead/Shovelhead
Cylinder Head Bolts Kits: Panhead/Shovelhead
more …
Inner Upper Pushrod Tubes
Inner Upper Pushrod Tubes
more …
Cylinder Head Bolts Kits: K/KH Models
Cylinder Head Bolts Kits: K/KH Models
more …
Cylinder Head Bolts Kits: Ironhead Sportster
Cylinder Head Bolts Kits: Ironhead Sportster
more …
Lower Pushrod Covers
Lower Pushrod Covers
Complete kit with four tubes and all gaskets.
more …
Washers for Cylinder Head Bolts: OHV Models and SV Cast Heads
Washers for Cylinder Head Bolts: OHV Models and SV Cast Heads
more …
Early Style Pushrod Covers for Sportster 1991-2003
Early Style Pushrod Covers for Sportster 1991-2003
Earlier style telescopic pushrod covers for 1991→ Sportster models. Necessary when using adjustable pushrods. This kit includes upper, lower and inner covers plus lifter block adaptors or washers and O-rings. Installs like 1986-1990 Sportster pushrod covers.
more …
Washers for Cylinder Head Bolts: SV Aluminum Heads
Washers for Cylinder Head Bolts: SV Aluminum Heads
more …
Custom Pushrod Covers
Custom Pushrod Covers
more …
Washers for Cylinder Head Bolts: Knucklehead, Panhead, Shovelhead Big Twin and XL
Washers for Cylinder Head Bolts: Knucklehead, Panhead, Shovelhead Big Twin and XL
more …
Spring Covers for Pushrod Covers
Spring Covers for Pushrod Covers
more …
Washers for Cylinder Head Bolts: Evolution Big Twin and XL
Washers for Cylinder Head Bolts: Evolution Big Twin and XL
more …
Bolt Kits for Rocker Covers: Knucklehead
Bolt Kits for Rocker Covers: Knucklehead
more …
Rocker Arm Shaft Nuts
Rocker Arm Shaft Nuts
Complete kit with four left side rocker arm shaft nuts and washers.
more …
Screw Kits for Rocker Arm Covers: Knucklehead 1938
Screw Kits for Rocker Arm Covers: Knucklehead 1938
more …
Nuts for Rocker Housings OEM Style
Nuts for Rocker Housings OEM Style
Exact duplicates of the large rocker shaft nuts. They feature the low profile design of the original counterparts.
more …
Nuts for Rocker Housings Custom
Nuts for Rocker Housings Custom
Complete kit with four right side nuts. Improved design with integrated O-ring seal.
more …
Mounting Kit for FLH Luggage Carriers
Mounting Kit for FLH Luggage Carriers
Kit of special nuts to assemble and mount the HD Style luggage racks on the 1/4”-24 studs of half moon plates of 1950’s rigid frame saddlebags. Can be used in custom applications, too.
more …
Custom Washer for Countersunk Socket Head Bolts (82°)
Custom Washer for Countersunk Socket Head Bolts (82°)
Custom washers to be used with ourcountersunk socket head bolts (82°) on level surfaces. The result is a nice low profile look. Chromed.
more …
Bolt Kits for Rocker Covers: Shovelhead
Bolt Kits for Rocker Covers: Shovelhead
more …
Rocker Arm Cover Screw Plates
Rocker Arm Cover Screw Plates
Reproduction of the reinforcing threaded screw plates.
more …
Bolt Kits for Rocker Covers: Evolution Big Twin & Sportster
Bolt Kits for Rocker Covers: Evolution Big Twin & Sportster
more …
Bolt Kits for Rocker Covers: Sportster
Bolt Kits for Rocker Covers: Sportster
more …
Rocker Housing Oil Line Fittings (Feed)
Rocker Housing Oil Line Fittings (Feed)
Complete kits with one feed line fitting for the cam cover and two rocker housing fittings.
more …
Rocker Arm Shaft Screws and Nuts OEM Style: Shovelhead/Iron Head Sportster
Rocker Arm Shaft Screws and Nuts OEM Style: Shovelhead/Iron Head Sportster
more …
Saddlebag Mounting Kit
Saddlebag Mounting Kit
Cad plated studs and chrome plated acorn nuts to install OEM style saddlebags with metal mounting plates on all rigid frame models 1934-1957. Exact reproduction for a perfect restoration.
more …
Utility Saddle Bag Holder Kit
Utility Saddle Bag Holder Kit
Accurate reproductions of the OEM style fasteners used to hold saddlebags on 1936-1938 Twins. They also work with strap-mounted custom saddlebags and tool bags or come in handy as bungee loops.
more …
Rocker Arm Shaft Nuts: Shovelhead/Iron Head Sportster
Rocker Arm Shaft Nuts: Shovelhead/Iron Head Sportster
more …
Screw Kits for Cam Cover: 750cc
Screw Kits for Cam Cover: 750cc
more …
Screw Kits for Cam Cover: Big Twin 1936-1969
Screw Kits for Cam Cover: Big Twin 1936-1969
more …
Screw Kits for Cam Cover: Big Twin 1993-1998 (Softail →1999)
Screw Kits for Cam Cover: Big Twin 1993-1998 (Softail →1999)
more …
Screws for Lifter Blocks: Big Twin 1936-1953 / 45 Cui (750 cc) 1937-1973
Screws for Lifter Blocks: Big Twin 1936-1953 / 45 Cui (750 cc) 1937-1973
These screws fit OEM and Cannonball generator cases.
more …
Screws for Lifter Blocks: Big Twin 1936-1953 and 45Cui/750cc 1937-1973 on Aftermarket Housings with 1/4”-20 thread
Screws for Lifter Blocks: Big Twin 1936-1953 and 45Cui/750cc 1937-1973 on Aftermarket Housings with 1/4”-20 thread
These screws fit aftermarket generator cases (z.B. S&S, Delkron) with non-standard 1/4”-20 threads.
more …
Screws for Lifter Blocks: Big Twins 1954–early 1976
Screws for Lifter Blocks: Big Twins 1954–early 1976
more …
Screws for Lifter Blocks: Big Twins late 1976-1999 Custom Applications with 1/4”-24 thread
Screws for Lifter Blocks: Big Twins late 1976-1999 Custom Applications with 1/4”-24 thread
Use these screws when installing 1976-1999 later production tappet bloks on pre 1976 OEM and Cannonball engine cases.
more …
Mounting Kits for Oil Pump:750cc / Big Twin S.V. 1937-73
Mounting Kits for Oil Pump:750cc / Big Twin S.V. 1937-73
Complete mounting kit for Sidevalve feed and breather pumps. Includes all studs, bolts, washers and special nuts.
more …
Nuts for Oil Pump: 750cc / Big Twin SV 1941-1948
Nuts for Oil Pump: 750cc / Big Twin SV 1941-1948
more …
Nuts for Oil Pump: Big Twin OHV 1936-1967
Nuts for Oil Pump: Big Twin OHV 1936-1967
more …
Rocker Arm Washers and O-Rings
Rocker Arm Washers and O-Rings
Replacement rocker arm washers and O-rings. Complete set for two cylinder heads.
more …
Nuts for Oil Pump: Big Twin OHV 1936-1967, Sidevalve 1941→
Nuts for Oil Pump: Big Twin OHV 1936-1967, Sidevalve 1941→
more …
Mounting Kits for Oil Pump: Big Twin OHV 1936-1967
Mounting Kits for Oil Pump: Big Twin OHV 1936-1967
more …
Mounting Kits for Oil Pump: Big Twin OHV 1968-1977
Mounting Kits for Oil Pump: Big Twin OHV 1968-1977
more …
Mounting Kits for Oil Pump: Big Twin OHV 1978-1991
Mounting Kits for Oil Pump: Big Twin OHV 1978-1991
more …
Oil Pump Mounting Kits for Big Twin 1992→
Oil Pump Mounting Kits for Big Twin 1992→
more …
Bolt Kits for Upper Motor Mount: 750cc 1929-1952
Bolt Kits for Upper Motor Mount: 750cc 1929-1952
more …
Bolt Kits for Upper Motor Mount: Big Twins 1936-1947
Bolt Kits for Upper Motor Mount: Big Twins 1936-1947
Accurate reproductions of the upper motor mount hardware for 1936-47 Big Twins.
more …
Bolt Kits for Upper Motor Mount: Big Twins and Sportster 1952-1972
Bolt Kits for Upper Motor Mount: Big Twins and Sportster 1952-1972
Accurate reproductions of the upper motor mount hardware for 1952-72 Big Twins & 1957-72 Sportster models.
more …
Bolt Kits for Upper Custom Motor Mount: Big Twins 1936-1984
Bolt Kits for Upper Custom Motor Mount: Big Twins 1936-1984
more …
Bolt Kits for Upper Motor Mount: Big Twins OHV 1948-1951
Bolt Kits for Upper Motor Mount: Big Twins OHV 1948-1951
more …
Bolt Kits for Upper Motor Mount: Big Twins OHV 1966-1972
Bolt Kits for Upper Motor Mount: Big Twins OHV 1966-1972
more …
Bolt Kits for Upper Motor Mount: Sportster 1986→
Bolt Kits for Upper Motor Mount: Sportster 1986→
more …
Bolt Kits for Lower Motor Mount: 750cc 1929-1952, Big Twins 1930-1936
Bolt Kits for Lower Motor Mount: 750cc 1929-1952, Big Twins 1930-1936
more …
Colony Nut and Bolt Checker
Colony Nut and Bolt Checker
This handy measuring gauge greatly helps to determine thread, length and diameter of metric and American UNF/UNC nuts and bolts.
more …
Bolt Kits for Lower Motor Mount: Big Twin Sidevalve 1937-1947
Bolt Kits for Lower Motor Mount: Big Twin Sidevalve 1937-1947
more …
Bolt Kits for Lower Motor Mount: Big Twins OHV 1936-1957
Bolt Kits for Lower Motor Mount: Big Twins OHV 1936-1957
more …
Bolt Kits for Lower Motor Mount: Big Twins OHV 1958-1969
Bolt Kits for Lower Motor Mount: Big Twins OHV 1958-1969
more …
Bolt Kits for Lower Motor Mount: Big Twins OHV 1936-1984
Bolt Kits for Lower Motor Mount: Big Twins OHV 1936-1984
more …
Bolt Kits for Lower Front Motor Mount: Sportster 1957-1985
Bolt Kits for Lower Front Motor Mount: Sportster 1957-1985
more …
Bolt Kits for Lower Rear Motor Mount: Sportster 1983-1985
Bolt Kits for Lower Rear Motor Mount: Sportster 1983-1985
more …
Bolt Kits for Lower Motor Mount: Sportster 1986-1998
Bolt Kits for Lower Motor Mount: Sportster 1986-1998
more …
Bolt Kits for Lower Motor Mount: Sportster 1999-2003
Bolt Kits for Lower Motor Mount: Sportster 1999-2003
more …
Replacement Nuts for Lower Engine Mount: Big Twins OHV 1936-1957
Replacement Nuts for Lower Engine Mount: Big Twins OHV 1936-1957
more …
Colony Special Tools for Early Sportster Forks
Colony Special Tools for Early Sportster Forks
Special pin wrench fo removal and installation of the fork piston rod and spring retainers of early Sportster and Super Glides front ends.
more …
Bolt Kits for Complete Motor Mount: Big Twins OHV 1936-1947
Bolt Kits for Complete Motor Mount: Big Twins OHV 1936-1947
more …
Bolt Kits for Complete Motor Mount: Big Twin Sidevalve 1937-1948
Bolt Kits for Complete Motor Mount: Big Twin Sidevalve 1937-1948
more …
Bolt Kits for Complete Motor Mount: Big Twins 1970-1984
Bolt Kits for Complete Motor Mount: Big Twins 1970-1984
more …
Screw Kits for Transmission Cover: 750cc
Screw Kits for Transmission Cover: 750cc
more …
Mounting Kits for Transmission: 750cc
Mounting Kits for Transmission: 750cc
Detailed reproductions of the nuts, washers and tension bolt to mount the transmission.
more …
Stud Kits for Transmission: Big Twin 1936-1985
Stud Kits for Transmission: Big Twin 1936-1985
more …
Nut kits for Transmission Side Cover: Big Twin 1936-1985
Nut kits for Transmission Side Cover: Big Twin 1936-1985
more …
Colony Installation Tools for Brake Shackles
Colony Installation Tools for Brake Shackles
Very helpful tool that will simplify the removal or the installation of the brake shackle bushings on all springer forks 1930-1948.
more …
Mounting Kit with Adjuster for Transmission: Big Twin 1936-1964
Mounting Kit with Adjuster for Transmission: Big Twin 1936-1964
more …
Mounting Kit for Transmission Base Plate: Big Twin 1936-1985
Mounting Kit for Transmission Base Plate: Big Twin 1936-1985
more …
Mounting Kits for Transmission: Big Twin 1965-1976
Mounting Kits for Transmission: Big Twin 1965-1976
more …
Bolt Kits for Sprocket Cover: Sportster and K-Model
Bolt Kits for Sprocket Cover: Sportster and K-Model
more …
Mounting Kits for Transmission: 4-Speed Big Twin 1977-1986
Mounting Kits for Transmission: 4-Speed Big Twin 1977-1986
more …
Bottom Stud Kits for Transmission Softail 1986-1999
Bottom Stud Kits for Transmission Softail 1986-1999
more …
Spoke Nipple Wrenches 45”/750 cc front
Spoke Nipple Wrenches 45”/750 cc front
Reproduction of the classic facory tool.
more …
Spoke Nipple Wrenches Big Twins and Sportsters
Spoke Nipple Wrenches Big Twins and Sportsters
Reproduction of the proven factory tool.
more …
Bolt Kits for Transmission Top Cover: 5-Speed Dyna 1991→
Bolt Kits for Transmission Top Cover: 5-Speed Dyna 1991→
more …
Mounting Kits for Transmission: 5-Speed Softail 1986-1999
Mounting Kits for Transmission: 5-Speed Softail 1986-1999
more …
Tool for Hub Nut
Tool for Hub Nut
Tool with ratchet drive, to remove and tighten the special nut on BT and K / XL wheels.
more …
Mounting Kits for Rear Sprocket/Pulley: FL, FX, Sportster 1973→
Mounting Kits for Rear Sprocket/Pulley: FL, FX, Sportster 1973→
more …
Mounting Kits for Rear Sprocket/Pulley: Big Twin 1973-1998, Sportster 1979-1990
Mounting Kits for Rear Sprocket/Pulley: Big Twin 1973-1998, Sportster 1979-1990
With chain or belt drive and cast wheel, with washers.
more …
Mounting Kits for Rear Sprocket/Pulley: FXWG, FXRS 1985-1992
Mounting Kits for Rear Sprocket/Pulley: FXWG, FXRS 1985-1992
With belt drive and wire wheel, without washers.
more …
Mounting Kits for Rear Sprocket/Pulley: Big Twin, Softail, Dyna, Sportster 1993→
Mounting Kits for Rear Sprocket/Pulley: Big Twin, Softail, Dyna, Sportster 1993→
more …
Mounting Kits for Rear Sprocket/Pulley: Softail, Dyna 2000→
Mounting Kits for Rear Sprocket/Pulley: Softail, Dyna 2000→
more …
Washer Kits for Mounting Kits for Rear Sprocket/Pulley
Washer Kits for Mounting Kits for Rear Sprocket/Pulley
Kit of special, hardened and chrome-plated washers for all 7/16” pulley or sprocket bolts. Set of 5.
more …
Slotted Nut Wrenches
Slotted Nut Wrenches
Special tools for the infamous slotted nuts used on vintage and classic Harleys. They allow loosening and tightening without damaging the nuts or your knuckles.
more …
Colony Valve Spring Collars for OHV Big Twin
Colony Valve Spring Collars for OHV Big Twin
Complete kit with four upper valve collars made from 7075 aluminum for durability. They are 75% lighter than the original parts.
more …
Colony Stud Installation Tools
Colony Stud Installation Tools
High quality, hardened, black oxide finished tools for easy installation of threaded studs. Sizes are engraved for quick identification.
more …
Tachometer Block-off Plug for Sportster
Tachometer Block-off Plug for Sportster
Chrome-plated plug that installs in lieu of tachmeter drive.
more …
Colony Pushrod Lifter Tool
Colony Pushrod Lifter Tool
Every wrench encounters this problem one day - the front exhaust pushrod (sometimes others, too) cannot be inserted between valve rocker and tappet and must be lifted against the valve spring pressure into the tappet adjuster. This sturdy lever makes the job a lot easier and prevents damage to the tappet guide, pushrod, covers, etc.
more …
Colony Pinion Gear Nut Wrench
Colony Pinion Gear Nut Wrench
Special socket to remove or install the HD pinion gear nut.
more …
Oil Passage Screw Panhead 1963-1965
Oil Passage Screw Panhead 1963-1965
Oil passage screw for 1963-1965 Panhead.
more …
Colony Special Tools for Primary Plugs
Colony Special Tools for Primary Plugs
This special tool allows proper opening of the clutch adjuster plugs on XL models from 1971-1976 and filler plugs on K/XL models from 1954-70 and 1986-1990.
more …
Clutch Hub Puller Big Twin 1936-1940
Clutch Hub Puller Big Twin 1936-1940
Accurate reproducion of the factory tool for pulling the clutch hub from the transmission main shaft.
more …
Wrenches for Clutch Hub Nuts Big Twins 1936-1940
Wrenches for Clutch Hub Nuts Big Twins 1936-1940
Double function tool for removing and tightening the clutch hub nut and for adjusting the spring tensioner nut.
more …
Special Tool for Inner Primary Chain Guard 45
Special Tool for Inner Primary Chain Guard 45"/750cc
This special tool is used to loosen and install the plugs (OEM 60648-39) for the front mounting bolts of the inner primary chain guards on 45"/750cc models. The included screw is used to secure the tool to the plugs.
more …
Rear Chain Oiler Fittings
Rear Chain Oiler Fittings
Fitting for the oil pump with integrated adjustabe rear chain oiler. Installs in lieu of your stock return line fitting and works with rigid oil lines only. The oil line towards the rear chain is not included.
more …
Repair Fitting Flathead Oil Pumps
Repair Fitting Flathead Oil Pumps
Used to replace stripped or broken fittings on 1937-up cast iron side valve feed or scavenger pumps. Features 7/16”-20 thread with internal hex for easy installation.
more …
Colony Thru Tap for for Oversize Timing Hole Plugs
Colony Thru Tap for for Oversize Timing Hole Plugs
Thru tap for cutting threads for oversize timing hole plugs. It features a lead-in section for easier alignment of the tap.
more …
Colony Bottoming Tap for Oversize Timing Hole Plugs
Colony Bottoming Tap for Oversize Timing Hole Plugs
Bottoming taps which are a possibility to cut oversize threads without disassembling your crankcases or transmission. They finish cut all threads with the tip merely protruding on the inside. Grease the tap genreously to prevent chips from falling towards the inside.
more …
Colony Bottoming Tap for Oversize Drain Plugs
Colony Bottoming Tap for Oversize Drain Plugs
Bottoming taps which are a possibility to cut oversize threads without disassembling your crankcases or transmission. They finish cut all threads with the tip merely protruding on the inside. Grease the tap genreously to prevent chips from falling towards the inside.
more …
Countersunk Socket Head Screws Grade 8 Zinc-plated
Countersunk Socket Head Screws Grade 8 Zinc-plated
more …
11-770
11-770
Mounting kit by Colony; for Delco Remy Horns; fits V series models 1931-36, 45”/750 cc 1931-39; steel; USA; USA; gross weight: 236 g
more …
11-309
11-309
Mounting kit by Colony; for Delco Remy Horns; fits Knucklehead 1936, all Big Twins 1937-1941, 45”/750 cc 1940-1941; steel; USA; gross weight: 160 g
more …
12-159
12-159
Stand-off screw »OEM Style« by Colony; for breaker point base plate and Sensor plate; fits 1972-1979 Big Twins; steel, CAD (ZnNi process); length: 19.4 mm; Ø 9.5 mm; thread: #8-32; replaces OEM HD 32608-70; USA; gross weight: 298 g
more …
12-161
12-161
Stand-off screw »OEM Style« by Colony; for breaker point base plate and Sensor plate; fits 1972-1979 Big Twins; steel, CAD (ZnNi process), oversize; length: 19.4 mm; Ø 9.5 mm; thread: #10-32; replaces OEM HD 32608-70; USA; gross weight: 21 g
more …
12-160
12-160
Stand-off screw »OEM Style« by Colony; for breaker point base plate and Sensor plate; fits 1980-1999 Big Twins; steel, CAD (ZnNi process); length: 17.9 mm; Ø 9.5 mm; thread: #8-32; replaces OEM HD 32601-80, and 32606-82; USA; gross weight: 30 g
more …
12-162
12-162
Stand-off screw »OEM Style« by Colony; for breaker point base plate and Sensor plate; fits 1980-1999 Big Twins; steel, CAD (ZnNi process), oversize; length: 17.9 mm; Ø 9.5 mm; thread: #10-32; replaces OEM HD 32601-80, and 32606-82; USA; gross weight: 29 g
more …
11-627
11-627
Terminal plate by Colony; fits WLA, WLC and XA 1942-1952; fiber compound; width: 98 mm; with fasteners and small parts; replaces OEM HD 4829-42M; USA; gross weight: 36 g
more …
11-628
11-628
Terminal plate by Colony; fits all models 1942-1946 except WLA, WLC and XA; fiber compound; width: 100 mm; with fasteners and small parts; replaces OEM HD 4829-42, and 69037-42; USA; gross weight: 36 g
more …
84-635
84-635
Retainer clips by Colony; for Lens; for Springer Headlights 6-1/2”; spring steel, parkerized; replaces OEM HD 4910-35, and 67733-35; USA; gross weight: 11 g
more …
86-212
86-212
Bolt/screw kit by Colony; for 32E generator; fits 45” 1937-1957; steel, chrome-plated; oval countersunk head with slot; thread: 1/4”-24; length: 2 ” (51 mm); replaces OEM HD 2349; USA; gross weight: 30 g
more …
86-312
86-312
Bolt/screw kit by Colony; for 32E generator; fits 45” 1937-1957; steel, CAD (ZnNi process); oval countersunk head with slot; thread: 1/4”-24; length: 2 ” (51 mm); replaces OEM HD 2349; USA; gross weight: 40 g
more …
86-412
86-412
Bolt/screw kit by Colony; for 32E generator; fits 45” 1937-1957; steel, parkerized; oval countersunk head with slot; thread: 1/4”-24; length: 2 ” (51 mm); replaces OEM HD 2349; USA; gross weight: 30 g
more …
86-316
86-316
Bolt/screw kit by Colony; for 32E generator; fits Flathead Big Twin 1930-1948; steel, CAD (ZnNi process); countersunk hex head with slot; thread: 1/4”-24; length: 1-7/8 ” (48 mm); wrench size: 7/16 ”; replaces OEM HD 30011-30; USA; gross weight: 40 g
more …
86-026
86-026
Screw kit by Colony; fits FLH/Servi-car 1960-1978; steel, CAD (ZnNi process), mounts aluminum housing to triple trees; thread: 5/16”-24; replaces OEM HD 2824W; USA; gross weight: 45 g
more …
86-315
86-315
Bolt/screw kit by Colony; for 32E generator; fits Flathead Big Twin 1930-1948; steel, chrome-plated; countersunk hex head with slot; thread: 1/4”-24; length: 1-7/8 ” (48 mm); wrench size: 7/16 ”; replaces OEM HD 30011-30; USA; gross weight: 40 g
more …
11-737
11-737
Screw kit by Colony; fits FLH/Servi-car 1960-1984; holds mounting ring to aluminum housing; steel, CAD (ZnNi process); thread: #10-24; replaces OEM HD 2661W, and 2662W; USA; gross weight: 25 g
more …
86-416
86-416
Bolt/screw kit by Colony; for 32E generator; fits Flathead Big Twin 1930-1948; steel, parkerized; countersunk hex head with slot; thread: 1/4”-24; length: 1-7/8 ” (48 mm); wrench size: 7/16 ”; replaces OEM HD 30011-30; USA; gross weight: 40 g
more …
86-308
86-308
Bolt/screw kit by Colony; for 32E generator; fits OHV Big Twin 1936-1949 and 1954-1957; steel, CAD (ZnNi process); oval countersunk head with slot; thread: 1/4”-24; length: 3 ” (76 mm); replaces OEM HD 1523-36, and 30011-36; USA; gross weight: 40 g
more …
86-408
86-408
Bolt/screw kit by Colony; for 32E generator; fits OHV Big Twin 1936-1949 and 1954-1957; steel, parkerized; oval countersunk head with slot; thread: 1/4”-24; length: 3 ” (76 mm); replaces OEM HD 1523-36, and 30011-36; USA; gross weight: 50 g
more …
86-208
86-208
Bolt/screw kit by Colony; for 32E generator; fits OHV Big Twin 1936-1949 and 1954-1957; steel, chrome-plated; countersunk head with slot; thread: 1/4”-24; length: 3 ” (76 mm); replaces OEM HD 1523-36, and 30011-36; USA; gross weight: 50 g
more …
86-062
86-062
Bolt/screw kit by Colony; for 32E generator; fits OHV Big Twin 1950-1954; steel, CAD (ZnNi process); countersunk head Phillips; thread: 1/4”-24; length: 3 ” (76 mm); replaces OEM HD 1523-36, and 30011-36; USA; gross weight: 46 g
more …
85-451
85-451
Screw kit by Colony; for Cover; for Beehive taillight 1939-1946; steel, parkerized; replaces OEM HD 68033-39, 7035, and 7691; USA; gross weight: 23 g
more …
11-717
11-717
Clip kit by Colony; for Lens; for Beehive taillight 1939-1946; steel, parkerized; replaces OEM HD 5067-42, 5067-42A, 5067-42B, 017, and 023; USA; gross weight: 9.2 g
more …
86-410
86-410
Bolt/screw kit by Colony; for 32E generator; fits OHV Big Twin 1936-1969; steel, CAD (ZnNi process); Ø 5/16”; thread: 1/4”-24; length: 3 ” (76 mm); replaces OEM HD 30011-36; USA; gross weight: 61 g
more …
86-411
86-411
Bolt/screw kit by Colony; for 32E generator; fits OHV Big Twin 1936-1969; steel, parkerized; Ø 5/16”; thread: 1/4”-24; length: 3 ” (76 mm); replaces OEM HD 30011-36; USA; gross weight: 60 g
more …
86-235
86-235
Screws by Colony; for Lamp bezel; for Tombstone taillight / Taillights 1955-1972; fits all Twins 1947-1954; stainless steel; length: 15 mm; round head with slot; thread: #8-32; replaces OEM HD 11375-38, and 68672-38; USA; gross weight: 15 g
more …
82-936
82-936
Contact springs by Colony; for Bulb base; for Panel base Cat Eye; fits models 1939-1946; steel; replaces OEM HD 71093-38, 71607-37, and 71093-36; USA; gross weight: 17 g
more …
82-938
82-938
Light shields by Colony; for Panel base Cat Eye; fits models 1939-1946; steel, CAD (ZnNi process); replaces OEM HD 71325-39, and 71326-39; USA; gross weight: 23 g
more …
82-939
82-939
Side contacts by Colony; for Bulb base; for Panel base Cat Eye; fits models 1939-1946; steel, CAD (ZnNi process); replaces OEM HD 71095-38; USA; gross weight: 25 g
more …
86-314
86-314
Bolt/screw kit by Colony; for 58 and 65A generators; fits 45”/750 cc 1958-1973; steel, CAD (ZnNi process); countersunk hex head; thread: 5/16”-24; length: 2-1/8 ” (54 mm); wrench size: 7/16 ”; replaces OEM HD 30013-58; USA; gross weight: 60 g
more …
23-123
23-123
Retaining ring by Colony; for Grip spiral; fits models with Glide fork 1949-1953; steel; with screws; replaces OEM HD 56235-47, and 56240-47; USA; gross weight: 54 g
more …
86-310
86-310
Bolt/screw kit by Colony; for 58 and 65A generators; fits Big Twin 1958-1969; steel, CAD (ZnNi process); countersunk hex head; thread: 5/16”-24; length: 3 ” (76 mm); wrench size: 7/16 ”; replaces OEM HD 30011-58; USA; gross weight: 70 g
more …
86-210
86-210
Bolt/screw kit by Colony; for 58 and 65A generators; fits Big Twin 1958-1969; steel, chrome-plated; countersunk hex head; thread: 5/16”-24; length: 3 ” (76 mm); wrench size: 7/16 ”; replaces OEM HD 30011-58; USA; gross weight: 80 g
more …
84-031
84-031
Bolt/screw kit by Colony; for 58 and 65A generators; fits Big Twin 1958-1969; steel, chrome-plated; countersunk socket head; thread: 5/16”-24; length: 3 ” (76 mm); wrench size: 1/4 ”; replaces OEM HD 30011-58; USA; gross weight: 70 g
more …
85-025
85-025
Bolt/screw kit by Colony; for 58 and 65A generators; fits Big Twin 1958-1969; steel, chrome-plated; countersunk acorn hex head; thread: 5/16”-24; length: 3 ” (76 mm); wrench size: 7/16 ”; replaces OEM HD 30011-58; USA; gross weight: 70 g
more …
85-026
85-026
Bolt/screw kit by Colony; for 58 and 65A generators; fits Big Twin 1958-1969; steel, chrome-plated; countersunk cap hex head; thread: 5/16”-24; length: 3 ” (76 mm); wrench size: 7/16 ”; replaces OEM HD 30011-58; USA; gross weight: 80 g
more …
86-311
86-311
Bolt/screw kit by Colony; for 58 and 65A generators; fits Sportster 1958-1970; steel, CAD (ZnNi process); countersunk hex head; thread: 5/16”-24; length: 3-1/4 ” (83 mm); replaces OEM HD 30013-52; USA; gross weight: 80 g
more …
84-274
84-274
Bolt/screw kit by Colony; for 58 and 65A generators; fits Sportster 1958-1970; steel, chrome-plated; countersunk socket head; thread: 5/16”-24; length: 3-1/4 ” (83 mm); replaces OEM HD 30013-52; USA; gross weight: 70 g
more …
86-063
86-063
Bolt/screw kit by Colony; for 58 and 65A generators; fits Sportster 1971-early 1984; steel, zinc plated; hex; thread: 5/16”-24; length: 3-1/4 ” (83 mm); replaces OEM HD 30013-71; USA; gross weight: 78 g
more …
84-276
84-276
Bolt/screw kit by Colony; for 58 and 65A generators; fits Sportster 1971-early 1984; steel, chrome-plated; socket head; thread: 5/16”-24; length: 3-1/4 ” (83 mm); replaces OEM HD 30013-71; USA; gross weight: 80 g
more …
20-977
20-977
Bolt kit by Colony; for Handlebar; fits Knucklehead 1936 and Big Twin 1937-1939; steel, parkerized; length: 1-5/16”; thread: 7/16”-20; with lock washers; replaces OEM HD 6033-30; USA; gross weight: 87 g
more …
85-099
85-099
Bolt/screw kit by Colony; for 58 and 65A generators; fits Sportster 1971-early 1984; steel, chrome-plated; acorn hex head; thread: 5/16”-24; length: 3-1/4 ” (83 mm); replaces OEM HD 30013-71; USA; gross weight: 90 g
more …
85-199
85-199
Bolt/screw kit by Colony; for 58 and 65A generators; fits Sportster 1971-early 1984; steel, chrome-plated; cap hex head; thread: 5/16”-24; length: 3-1/4 ” (83 mm); replaces OEM HD 30013-71; USA; gross weight: 100 g
more …
20-978
20-978
Bolt kit by Colony; for Handlebar; fits 45”/750 cc 1939-1939; steel, parkerized, plain heads; length: 1-1/8”; thread: 7/16”-20; with lock washers; replaces OEM HD 2655-37; USA; gross weight: 80 g
more …
15-956
15-956
Shafts by Colony; for Rocker plates; fits IOE models 1909-1915; steel, nickel-plated; thread: 3/8”-24; with nuts and washers; replaces OEM HD 2639-12, and 2639-09; USA; USA; gross weight: 336.2 g
more …
20-979
20-979
Bolt kit by Colony; for Handlebar; fits Big Twin 1936-1948, 45” 1940-1957; steel, plain heads; length: 1-5/16”; thread: 7/16”-20; with lock washers; replaces OEM HD 4636; USA; gross weight: 83 g
more …
15-951
15-951
Shafts by Colony; for Rocker plates; fits IOE models 1916-1929; steel, nickel-plated / parkerized; thread: 3/8”-24; with nuts and washers; replaces OEM HD 2639-12, and 2639-09; USA; USA; gross weight: 335 g
more …
20-098
20-098
Bolt kit »1035 CP« by Colony; for Handlebar; fits Big Twin 1936-1948, 45” 1940-1957; steel, parkerized; length: 1-5/16”; thread: 7/16”-20; with lock washers; replaces OEM HD 4636; USA; gross weight: 90 g
more …
20-094
20-094
Bolt kit »1035 CP« by Colony; for Handlebar; fits Big Twin 1936-1948, 45” 1940-1957; steel, CAD (ZnNi process); length: 1-5/16”; thread: 7/16”-20; with lock washers; replaces OEM HD 4636; USA; gross weight: 90 g
more …
23-200
23-200
Adjusting screw by Colony; for mousetrap clutch booster; fits Big Twin 1952-1967; steel, CAD (ZnNi process); length: 45 mm; thread: 5/16”-24; with nut; replaces OEM HD 38674-52; USA; gross weight: 24 g
more …
20-095
20-095
Bolt kit by Colony; for Handlebar; fits Big Twin 1936-1948, 45” 1940-1957; steel, chrome-plated; length: 1-5/16”; thread: 7/16”-20; with lock washers; replaces OEM HD 4636; USA; gross weight: 80 g
more …
15-969
15-969
Bushing kit by Colony; for rocker shafts; fits IOE models 1913-1929; steel, hardened; replaces OEM HD 2645-13; USA; USA; gross weight: 74 g
more …
82-927
82-927
U-bolt by Colony; for mousetrap clutch booster; fits Big Twin 1952-1967; steel, parkerized; replaces OEM HD 38460-52; USA; gross weight: 100 g
more …
82-928
82-928
U-bolt by Colony; for mousetrap clutch booster; fits Big Twin 1952-1967; steel, chrome-plated; replaces OEM HD 38460-52; USA; gross weight: 100 g
more …
16-238
16-238
Bushings by Colony; for Rocker plates; for Classic and I-Beam Springer forks; fits Big Twin, WLC, Servi-Car 1930-1957; steel; length: 25.4 mm; ID x OD: 19 x 24 mm; replaces OEM HD 45667-30; USA; gross weight: 120 g
more …
16-240
16-240
Bushings by Colony; for Rocker plates; for Classic and I-Beam Springer forks; fits 45 cui/750cc 1930-1952 (exc. Servi-car 1940→ and WLC); steel; length: 22.2 mm; ID x OD: 19 x 24 mm; replaces OEM HD 45668-30; USA; gross weight: 110 g
more …
16-232
16-232
Tab washers by Colony; for Rocker plates; for Classic and I-Beam Springer forks; fits Big Twin, WLC, Servi-Car; steel, parkerized; replaces OEM HD 45683-32, 45681-31, and 45680-30; USA; gross weight: 40 g
more …
15-977
15-977
Leaf spring by Colony; for Guide rods; fits IOE and V-series models 1923-1936, D, R, W models 1929-1939; spring steel, parkerized; length: 51 mm; replaces OEM HD 2623-23; USA; gross weight: 32 g
more …
15-897
15-897
Leaf spring by Colony; for Guide rods; fits IOE and V-series models 1923-1936, D, R, W models 1929-1939; spring steel, CAD (ZnNi process); replaces OEM HD 2623-23; USA; gross weight: 32 g
more …
82-958
82-958
Clamp by Colony; for control cables; fits Singles 1926-1934, 45"/750cc 1929-1950; left; steel, parkerized; with screw; replaces OEM HD 3344-26, and 035; USA; gross weight: 14 g
more …
82-959
82-959
Clamp by Colony; for control cables; fits Singles 1926-1934, 45"/750cc 1929-1941; right; steel, parkerized; with screw; replaces OEM HD 3345-26, and 035; USA; gross weight: 14 g
more …
82-963
82-963
Control coil bracket by Colony; for Oil pump; for control cables / rear cylinder; fits 45"/750cc and V-models 1929-1936; steel, parkerized; replaces OEM HD 3393-29; USA; gross weight: 18 g
more …
23-189
23-189
Washer by Colony; for Brake cable / Clutch cable; fits models 1949-1964; steel, CAD (ZnNi process); ID x OD: 1/2 x 3/4”, 0.025” thick; replaces OEM HD 6543; USA; gross weight: 1 g
more …
22-506
22-506
Clip by Colony; for Brake cable; fits models 1928-1957; on handlebar; steel; replaces OEM HD 9980; USA; gross weight: 45 g
more …
28-105
28-105
Adjusting screw by Colony; for Brake cable; fits models 1928-1940; OEM cables .240”/6.1 mm OD; steel, parkerized; replaces OEM HD 38674-28, and 7827; USA; gross weight: 27 g
more …
28-106
28-106
Adjusting screw by Colony; for Brake cable; fits models 1928-1940; aftermarket cables .230”/5.8 mm OD; steel, parkerized; replaces OEM HD 38674-28, and 7827; USA; gross weight: 27 g
more …
27-694
27-694
Adjusting screw by Colony; for Brake cable; fits models 1928-1940; steel, CAD (ZnNi process); Ø 0.240”; replaces OEM HD 38674-28, and 7827; USA; gross weight: 28 g
more …
28-206
28-206
Adjusting screw by Colony; for Brake cable; fits models 1941-1957; steel, CAD (ZnNi process); thread: 5/16”-18; replaces OEM HD 45162-51, and 45162-41; USA; gross weight: 40 g
more …
22-504
22-504
Terminal by Colony; for Brake cable; fits models 1928-1957; steel, parkerized; replaces OEM HD 4170-28, and 45172-28; USA; gross weight: 59 g
more …
27-077
27-077
Grease nipple by Colony; fits 1939→ models; steel, CAD (ZnNi process), straight; thread: 5/16”-32; replaces OEM HD 9851B; USA; gross weight: 28 g
more …
27-078
27-078
Grease nipple by Colony; fits 1939→ models; steel, chrome-plated, straight; thread: 5/16”-32; replaces OEM HD 9851B; USA; gross weight: 27 g
more …
27-079
27-079
Grease nipple by Colony; fits 1939→ models; steel, parkerized, straight; thread: 5/16”-32; replaces OEM HD 9851B; USA; gross weight: 26 g
more …
27-082
27-082
Grease nipple by Colony; fits 1939→ models; steel, CAD (ZnNi process), 67.5°; thread: 5/16”-32; replaces OEM HD 9852; USA; gross weight: 49 g
more …
27-083
27-083
Grease nipple by Colony; fits 1939→ models; steel, chrome-plated, 67.5°; thread: 5/16”-32; replaces OEM HD 9852; USA; gross weight: 50 g
more …
27-084
27-084
Grease nipple by Colony; fits 1939→ models; steel, parkerized, 67.5°; thread: 5/16”-32; replaces OEM HD 9852; USA; gross weight: 50 g
more …
27-085
27-085
Grease nipple by Colony; fits 1939→ models; steel, CAD (ZnNi process), 90°; thread: 5/16”-32; replaces OEM HD 9853; USA; gross weight: 53 g
more …
27-086
27-086
Grease nipple by Colony; fits 1939→ models; steel, chrome-plated, 90°; thread: 5/16”-32; replaces OEM HD 9853; USA; gross weight: 53 g
more …
27-087
27-087
Grease nipple by Colony; fits 1939→ models; steel, parkerized, 90°; thread: 5/16”-32; replaces OEM HD 9853; USA; gross weight: 53 g
more …
18-650
18-650
Stem nut by Colony; for wide forks; fits FL(H) 1949-1984, FX(D)WG 1980-2007, Softail 1984-2008, without OEM steering damper; steel; with tab washer; replaces OEM HD 45718-60, and 45717-63; USA; gross weight: 110 g
more …
18-151
18-151
Mounting kit by Colony; for Monroe Type Springer Shock Absorbers; fits 1946-1957; lower; steel, parkerized; replaces OEM HD 54216-46, 54220-45, 54224-45, and 54226-45; USA; gross weight: 394.8 g
more …
18-152
18-152
Mounting kit by Colony; for Monroe Type Springer Shock Absorbers; fits 1946-1957; upper; steel, parkerized; replaces OEM HD 54216-45, 54219-45, and 54227-46; USA; gross weight: 243.2 g
more …
45-941
45-941
Bushing by Colony; for Shifter shaft; for Big Twins 1952-1969; steel; length: 1-1/16”; Ø 3/4”; replaces OEM HD 33638-52; USA; gross weight: 32 g
more …
45-942
45-942
Bushing by Colony; for Shifter shaft; for 4- speed Big Twins, Softail 1970-1989; steel; length: 1-1/2”; Ø 3/4”; replaces OEM HD 33638-70; USA; gross weight: 42 g
more …
28-146
28-146
Clevis pin by Colony; for Brake rod; fits models 1930-1979; steel, parkerized; length: 20.5 mm; Ø 1/4”; replaces OEM HD 42269-30; USA; gross weight: 6 g
more …
27-666
27-666
Clevis pin by Colony; for Brake rod; fits models 1930-1979; steel, CAD (ZnNi process); length: 20.5 mm; Ø 1/4”; with washer and cotter pin; replaces OEM HD 42269-30; USA; gross weight: 7 g
more …
44-981
44-981
Bracket kit by Colony; for Footboards; fits 45” solo models 1929-1952, Servi-Car 1933-1973; rear + front; steel, parkerized; replaces OEM HD 50653-35, 50651-35, 50650-24, 50652-35, and 50669-37; USA; gross weight: 354 g
more …
44-982
44-982
Nut and washer kit by Colony; for Footboards; fits 45” solo models 1929-1952, Servi-Car 1933-1973; rear + front; steel, parkerized; replaces OEM HD 6400, 7789, and 50669-37; USA; gross weight: 76 g
more …
29-037
29-037
Bolt kit by Colony; for Brake shackle; fits Big Twin 1973-1983; steel, chrome-plated; replaces OEM HD 41734-73, and 7843; USA; gross weight: 140 g
more …
29-038
29-038
Bolt kit by Colony; for Brake shackle; fits Big Twin 1973-1983; steel, zinc plated; replaces OEM HD 41734-73, and 7843; USA; gross weight: 140 g
more …
44-970
44-970
Mounting bolt kit by Colony; for Footboards; fits all models 1914-1940; steel, parkerized, round head w/ slot; thread: 1/4”-24; replaces OEM HD 2954-14; USA; gross weight: 63 g
more …
45-495
45-495
Mounting bolt kit by Colony; for Footboards; fits all models 1941-1981; steel, CAD (ZnNi process), hex head; thread: 1/4”-24; replaces OEM HD 50635-14A; USA; gross weight: 60 g
more …
45-497
45-497
Mounting bolt kit by Colony; for Footboards; fits all models 1941-1981; steel, parkerized, hex head; thread: 1/4”-24; replaces OEM HD 50635-14A; USA; gross weight: 60 g
more …
45-496
45-496
Mounting bolt kit by Colony; for Footboards; fits all models 1941-1964; with longer rear bolts for passenger peg mount; steel, CAD (ZnNi process); thread: 1/4”-24; replaces OEM HD testa esagonale; USA; gross weight: 100 g
more …
45-498
45-498
Mounting bolt kit by Colony; for Footboards; fits all models 1941-1964; with longer rear bolts for passenger peg mount; steel, parkerized, hex head; thread: 1/4”-24; USA; gross weight: 100 g
more …
45-499
45-499
Mounting bolt kit by Colony; for floorboards 1982→ (Softail →2017); steel, chrome-plated; replaces OEM HD 50635-82A; USA; gross weight: 60 g
more …
27-758
27-758
Bleeder screw by Colony; for Brake caliper; fits Sportster 2004-2020, Softail front 2015→, Softail rear 2018→; steel, zinc plated; thread: M8; replaces OEM HD 42827-04; USA; gross weight: 21 g
more …
27-759
27-759
Bleeder screw by Colony; for Brake caliper; fits Sportster 2004-2020, Softail front 2015→, Softail rear 2018→; steel, chrome-plated; thread: M8; replaces OEM HD 42827-04; USA; gross weight: 22 g
more …
27-160
27-160
Spacers »Smooth« by Colony; for Wheel axle; fits FXSTS 1988-1996; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 5/8”-18; position: front; replaces OEM HD 44029-88, 6639, and 7994; USA; gross weight: 151 g
more …
27-161
27-161
Spacers »Smooth« by Colony; for Wheel axle; fits FXSTS 1997-1999; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 5/8”-18; position: front; replaces OEM HD 43683-97, 6639, and 7994; USA; gross weight: 170 g
more …
27-162
27-162
Spacers »Smooth« by Colony; for Wheel axle; fits FXSTS 2000-2006; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 5/8”-18; position: front; replaces OEM HD 44029-00, 508, 6639, and 7987; USA; gross weight: 146 g
more …
26-879
26-879
Axle nut kit by Colony; fits K-Model and Sportster 1952-1972; steel, chrome-plated; thread: 9/16”-18; position: front; with lock washer; replaces OEM HD 43886-52, and 7087; USA; gross weight: 80 g
more …
27-175
27-175
Spacers »Smooth« by Colony; for Wheel axle; fits FXST 2007-2017; steel, chrome-plated; matching axle Ø: 1 ”; thread: 5/8”-18; position: front; replaces OEM HD 41504-07, 41502-07, 6594, 7813A, and 11180; USA; gross weight: 306 g
more …
27-163
27-163
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTF 1990-1995; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 43674-95, 6590HW, 7068, and 7845; USA; gross weight: 110 g
more …
27-164
27-164
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTF 1996-1999; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 43674-95, 43657-89, 6590HW, 7068, and 7845; USA; gross weight: 208 g
more …
27-165
27-165
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTF 2000-2006; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 43617-00A, 43683-00A, 6590HW, 7068, and 7845; USA; gross weight: 143 g
more …
27-166
27-166
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTF 2007-2017; steel, chrome-plated; matching axle Ø: 1 ”; thread: 5/8”-18; position: front; replaces OEM HD 41695-07, 41502-07, 6954, and 7813A; USA; gross weight: 259 g
more …
27-167
27-167
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTC 1997-1999; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 43683-97, 6590HW, 7068, and 7596; USA; gross weight: 169 g
more …
27-168
27-168
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTC 2000-2006; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 43683-00A, 6090HW, 7068, and 7596; USA; gross weight: 108 g
more …
27-169
27-169
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTC 2007-2017; steel, chrome-plated; matching axle Ø: 1 ”; thread: 5/8”-18; position: front; replaces OEM HD 41695-07, 41502-07, 11180, 6594, and 7813A; USA; gross weight: 281 g
more …
27-170
27-170
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTS 1997-1999; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 5/8”-18; position: front; replaces OEM HD 43360-97, 43624-97, 508, and 7987; USA; gross weight: 358 g
more …
27-171
27-171
Spacers »Smooth« by Colony; for Wheel axle; fits FLSTS 2000-2017; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 5/8”-18; position: front; replaces OEM HD 43360-00, 43624-00, 508, and 7987; USA; gross weight: 319 g
more …
27-172
27-172
Spacers »Smooth« by Colony; for Wheel axle; fits FXST 1984-1996; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 40910-84A, 6590HW, 7068, and 7845; USA; gross weight: 131 g
more …
27-173
27-173
Spacers »Smooth« by Colony; for Wheel axle; fits FXST 1997-1999; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 40910-84B, 43683-97, 6590HW, 7068, and 7845; USA; gross weight: 221 g
more …
27-174
27-174
Spacers »Smooth« by Colony; for Wheel axle; fits FXST 2000-2007; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 40910-00, 43683-00, 6090HW, 7068, and 7956; USA; gross weight: 170 g
more …
27-177
27-177
Spacers »Smooth« by Colony; for Wheel axle; fits FXSTD 2000-2007; steel, chrome-plated; matching axle Ø: 1 ”; thread: 5/8”-18; position: front; replaces OEM HD 43623-00, 43683-00A, 6590HW, 7068, and 8001; USA; gross weight: 588 g
more …
27-176
27-176
Spacers »Smooth« by Colony; for Wheel axle; fits FXSTDI 2001-2006; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 1/2”-20; position: front; replaces OEM HD 43683-00, 43623-00, 6590HW, 7068, and 7956; USA; gross weight: 357 g
more …
27-180
27-180
Spacers »Smooth« by Colony; for Wheel axle; fits Softail 1984-1999; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 5/8”-18; position: rear; replaces OEM HD 41595-86, 43654-86A, 7987, 5756, and 508; USA; gross weight: 366 g
more …
27-181
27-181
Spacers »Smooth« by Colony; for Wheel axle; fits Softail 2000-2007; steel, chrome-plated; matching axle Ø: 3/4 ”; thread: 5/8”-18; position: rear; replaces OEM HD 41595-00A, 43654-00A, 7987, 5756, and 508; USA; gross weight: 377 g
more …
27-182
27-182
Spacers »Smooth« by Colony; for Wheel axle; fits Softail 2008→; steel, chrome-plated; matching axle Ø: 1 ”; thread: M24 x 2.0; position: rear; replaces OEM HD 41229-08, 41359-08, 41242-08, 41694-08, and 6551; USA; gross weight: 563 g
more …
27-663
27-663
Spacer by Colony; for Wheel axle; fits V-series models 1930-1936; rear; steel, parkerized; length: 35 mm; replaces OEM HD 3953-30; USA; gross weight: 93 g
more …
27-664
27-664
Spacer by Colony; for Wheel axle; fits V-series models 1930-1936; rear; steel, parkerized; length: 19 mm; replaces OEM HD 3955-30; USA; gross weight: 56 g
more …
40-967
40-967
Lock nut by Colony; for Wheel bearing; fits K/XL 1955-1978; steel, CAD (ZnNi process); matching axle Ø: 17 mm; with oil seal and spacer; replaces OEM HD 41196-55, 41210-55, and 41201-55; USA; gross weight: 72 g
more …
27-739
27-739
Spacer by Colony; for Wheel axle; fits K-models 1952-1954; rear; steel, parkerized; length: 54 mm; matching axle Ø: 17 mm; replaces OEM HD 41600-52; USA; gross weight: 97 g
more …
27-737
27-737
Spacer by Colony; for Wheel axle; fits K-models, Sportster 1955-1978; rear; steel, CAD (ZnNi process); length: 49 mm; matching axle Ø: 17 mm; replaces OEM HD 41600-54; USA; gross weight: 107 g
more …
27-735
27-735
Spacer by Colony; for Wheel axle; fits FX Super Glide 1971-1972; rear; steel, CAD (ZnNi process); length: 54 mm; matching axle Ø: 17 mm; replaces OEM HD 41595-67; USA; gross weight: 167 g
more …
82-955
82-955
Clamp by Colony; for cable brake/ignition on fork; fits 74"/80" V-models 1931-1936, R/W models 1931-1939, C-singles 1931-1934; steel, parkerized, parkerized; replaces OEM HD 4726-31; USA; gross weight: 13 g
more …
22-143
22-143
Clamp by Colony; for ignition control cable; fits Big Twin 1937-1946; frame tube; steel, parkerized; replaces OEM HD 3393-37, and 56626-37; USA; gross weight: 20 g
more …
27-736
27-736
Spacer by Colony; for Wheel axle; fits FX Super Glide 1971-1972; rear; steel, chrome-plated; length: 54 mm; matching axle Ø: 17 mm; replaces OEM HD 41595-67; USA; gross weight: 166 g
more …
27-738
27-738
Spacer by Colony; for Wheel axle; fits K-models, Sportster 1955-1978; rear; steel, chrome-plated; length: 49 mm; matching axle Ø: 17 mm; replaces OEM HD 41600-54; USA; gross weight: 107 g
more …
31-114
31-114
Mounting kit by Colony; for Rear fender; fits 45" Solo models 1929-1952; steel, CAD (ZnNi process); USA; gross weight: 280 g
more …
31-115
31-115
Mounting kit by Colony; for Rear fender; fits 45" Solo models 1929-1952; steel, parkerized; USA; gross weight: 280 g
more …
31-113
31-113
Mounting kit by Colony; for Rear fender; fits 45" Solo models 1929-1952; steel, chrome-plated; USA; gross weight: 280 g
more …
31-106
31-106
Mounting kit by Colony; for Rear fender; fits Big Twin 1936-1957; complete; steel, CAD (ZnNi process); USA; gross weight: 330 g
more …
31-107
31-107
Mounting kit by Colony; for Rear fender; fits Big Twin 1936-1957; complete; steel, parkerized; USA; gross weight: 330 g
more …
31-108
31-108
Mounting kit by Colony; for Rear fender; fits Big Twin 1936-1957; complete; steel, chrome-plated; USA; gross weight: 320 g
more …
85-568
85-568
Mounting kit by Colony; for Rear fender; fits Big Twin 1936-1957; for fender clamps only; steel, parkerized; USA; gross weight: 204 g
more …
31-105
31-105
Mounting kit by Colony; for Rear fender; fits FL, FLH 1958-1980; steel, CAD (ZnNi process) / zinc plated; replaces OEM HD 4018W, 4380W, 2272, 7753, and 7800W; USA; gross weight: 263 g
more …
85-582
85-582
Mounting kit by Colony; for Rear fender; fits FL, FLH 1958-1980; steel, chrome-plated / zinc plated; replaces OEM HD 4018W, 4380W, 2272, 7753, and 7800W; USA; gross weight: 300 g
more …
31-121
31-121
Mounting kit by Colony; for Rear fender; fits FX/FXE 1972-1986; steel, chrome-plated / zinc plated; replaces OEM HD 3945, 4716W, 5423, 5942B, 6416, and 7680W; USA; gross weight: 316 g
more …
31-116
31-116
Mounting kit by Colony; for Rear fender; fits FXWG 1980-1986; steel, chrome-plated / zinc plated; replaces OEM HD 7680W, 6379W, 4720W, and 2005; USA; gross weight: 327 g
more …
31-109
31-109
Mounting kit by Colony; for Rear fender; fits Sportster 1952-1958; steel, CAD (ZnNi process); replaces OEM HD 2414W, 4362, 7752, and 7793; USA; gross weight: 148 g
more …
31-011
31-011
Mounting kit by Colony; for Rear fender; fits Sportster 1959-1981; steel, CAD (ZnNi process); replaces OEM HD 22272, 7753, 7800W, and 4724; USA; gross weight: 149 g
more …
85-584
85-584
Mounting kit by Colony; for Rear fender; fits Sportster 1959-1981; steel, chrome-plated; replaces OEM HD 22272, 7753, 7800W, and 4724; USA; gross weight: 150 g
more …
35-296
35-296
Tank cover by Colony; fits Knucklehead 1936, Big Twin 1937-1938; rubber, black; replaces OEM HD 3502-36A; USA; gross weight: 70 g
more …
82-934
82-934
Operating knob by Colony; for 1940-1965 Fuel Valves; fits Big Twin and 45”/750cc 1940-1965; steel, chrome-plated / CAD (ZnNi process); replaces OEM HD 62051-40, 62091-40, 71804-26, 6307, 62094-40, 2626, and 7115; USA; gross weight: 40 g
more …
82-935
82-935
Operating knob by Colony; for 1940-1965 Fuel Valves; fits Big Twin and 45”/750cc 1940-1965; steel, parkerized; replaces OEM HD 62051-40, 62091-40, 71804-26, 6307, 62094-40, 2626, and 7115; USA; gross weight: 30 g
more …
85-528
85-528
Plug by Colony; for timing hole and oil tank drain; fits timing hole: 61", 74", 80" models 1931-early 1938, all twins 1938-1939, oil tank drain: WLA 1940, transmission filler plug: Singles 1926-1934, 45"/750cc 1929-1934, all twins 1938-1939; steel, CAD (ZnNi process); hex with flange; thread: 5/8”-18; wrench size: 9/16 ”; replaces OEM HD 2326-26; USA; gross weight: 30 g
more …
85-529
85-529
Plug by Colony; for timing hole and oil tank drain; fits timing hole: 61", 74", 80" models 1931-early 1938, all twins 1938-1939, oil tank drain: WLA 1940, transmission filler plug: Singles 1926-1934, 45"/750cc 1929-1934, all twins 1938-1939; steel, parkerized; hex with flange; thread: 5/8”-18; wrench size: 9/16 ”; replaces OEM HD 2326-26; USA; gross weight: 30 g
more …
85-539
85-539
Plug by Colony; for timing hole and oil tank drain; fits timing hole and oil tank drain: all twins 1938-1949, fuel tank drain: WLA 1941-1942; steel, CAD (ZnNi process); hex; thread: 5/8”-18; wrench size: 7/8 ”; replaces OEM HD 2326-38; USA; gross weight: 40 g
more …
85-541
85-541
Plug by Colony; for timing hole and oil tank drain; fits timing hole and oil tank drain: all twins 1938-1949, fuel tank drain: WLA 1941-1942; steel, parkerized; hex; thread: 5/8”-18; wrench size: 7/8 ”; replaces OEM HD 2326-38; USA; gross weight: 40 g
more …
84-342
84-342
Gasket by Colony; for Tank name plates; fits Big Twin and 45”/750 cc models 1940-1946; paper; with screws, lockwashers; replaces OEM HD 61790-40, 61791-40, and 61792-41; USA; gross weight: 32 g
more …
85-536
85-536
Plug by Colony; for timing hole and oil tank drain; fits timing hole: 45", 61", 74", 80" models 1941-1969, Servi-Car 1938-1973, K, XL 1952-1965, oil tank drain: all twins 1941-1969, Servi-Car 1941-1973, FLH-80 and Classic late 1981, FLT 1980-early 1981, Sportster C/CH 1958-1961, XLCH 1966-1981, XL/XLS 1979-1981, XLCR 1977; steel, CAD (ZnNi process); hex; thread: 5/8”-18; wrench size: 3/4 ”; replaces OEM HD 704; USA; gross weight: 40 g
more …
27-585
27-585
Banjo bolt by Colony; for Brake line / Wheel brake cylinder; fits Big Twin 1958-1972; steel, CAD (ZnNi process); length: 20 mm; thread: 3/8”-24; with seal washers; replaces OEM HD 41743-58, and 41744-58; USA; gross weight: 28 g
more …
85-537
85-537
Plug by Colony; for timing hole and oil tank drain; fits timing hole: 45", 61", 74", 80" models 1941-1969, Servi-Car 1938-1973, K,XL 1952-1965, oil tank drain: all twins 1941-1969, Servi-Car 1941-1973, FL(H) 1970-1984, FLT 1980-early 1981, Sportster C/CH 1958-1961, XLCH 1966-1981, XL/XLS 1979-1981, XLCR 1977; steel, chrome-plated; hex; thread: 5/8”-18; wrench size: 3/4 ”; replaces OEM HD 704; USA; gross weight: 40 g
more …
71-240
71-240
Screw-in nipple by Colony; fits 74” Twins 1921-1929, 61” Twins late 1928-1929; steel, nickel-plated, thread cylinder 1-1/2”-18, thread pipe flange 1-21/32”-18; replaces OEM HD 1012-21; USA; gross weight: 100 g
more …
71-241
71-241
Sleeve nut by Colony; fits 74” Twins 1921-1929, 61” Twins late 1928-1929; steel, nickel-plated; thread: 1-21/32”-18; replaces OEM HD 1014-21; USA; gross weight: 60 g
more …
40-218
40-218
Mounting kit by Colony; for Solo seat / T-Bar; fits models 1934-1980; steel, CAD (ZnNi process); replaces OEM HD 52098-34, 52096-34, 7789, 52103-31, and 7752; USA; gross weight: 180 g
more …
40-219
40-219
Mounting kit by Colony; for Solo seat / T-Bar; fits models 1934-1980; steel, parkerized; replaces OEM HD 52098-34, 52096-34, 7789, 52103-31, and 7752; USA; gross weight: 180 g
more …
35-944
35-944
Adapter by Colony; for Fuel line / Fuel filter; fits Linkert carburetors; for 1932-1938 OEM type gas strainers; steel, CAD (ZnNi process); connection thread: 15/32”-24; USA; gross weight: 26 g
more …
40-212
40-212
Bushing by Colony; for Seat post unit; fits 45cui and single cylinder models 1929→ and VL 1930-1936; bronze; length: 19.1 mm; Ø 32.6 mm; inner Ø: 27.1 mm; replaces OEM HD 3113-29, and 47581-29; USA; gross weight: 50 g
more …
40-211
40-211
Bushing by Colony; for Seat post unit; fits Big Twin 1936-1957; bronze; length: 31.2 mm; Ø 35 mm; inner Ø: 30.3 mm; replaces OEM HD 47583-36; USA; gross weight: 60 g
more …
67-102
67-102
Sleeve nuts by Colony; fits 61/74 cui OHV 1940-1954 and WLDR, WR, K, KR models 1940-1965; steel, chrome-plated; replaces OEM HD 27052-40; USA; gross weight: 150 g
more …
40-221
40-221
Bushing by Colony; for Seat post unit; fits Big Twin 1958-1980; bronze; length: 32 mm; Ø 31.9 mm; inner Ø: 30 mm; replaces OEM HD 47094-58; USA; gross weight: 50 g
more …
67-100
67-100
Sleeve nuts by Colony; fits 61/74 cui OHV 1940-1954 and WLDR, WR, K, KR models 1940-1965; steel, CAD (ZnNi process); replaces OEM HD 27052-40; USA; gross weight: 200 g
more …
67-103
67-103
Sleeve nuts by Colony; fits 61/74 cui OHV 1940-1954 and WLDR, WR, K, KR models 1940-1965; steel, parkerized; replaces OEM HD 27052-40; USA; gross weight: 150 g
more …
67-104
67-104
Sleeve nuts by Colony; fits 45” models 1932→; steel, CAD (ZnNi process); replaces OEM HD 1115-32, and 27051-32; USA; gross weight: 140 g
more …
67-107
67-107
Sleeve nuts by Colony; fits 45” models 1932→; steel, parkerized; replaces OEM HD 1115-32, and 27051-32; USA; gross weight: 140 g
more …
67-110
67-110
Sleeve nuts by Colony; fits 74”/80” Flatheads 1930-1948, WLD 1940-1946 and 61” Knucklehead 1936-1939; steel, chrome-plated; replaces OEM HD 1115-30, and 27050-30; USA; gross weight: 150 g
more …
67-108
67-108
Sleeve nuts by Colony; fits 74”/80” Flatheads 1930-1948, WLD 1940-1946 and 61” Knucklehead 1936-1939; steel, CAD (ZnNi process); replaces OEM HD 1115-30, and 27050-30; USA; gross weight: 150 g
more …
67-111
67-111
Sleeve nuts by Colony; fits 74”/80” Flatheads 1930-1948, WLD 1940-1946 and 61” Knucklehead 1936-1939; steel, parkerized; replaces OEM HD 1115-30, and 27050-30; USA; gross weight: 150 g
more …
65-835
65-835
Screw by Colony; for air horns; fits R and V models 1935-1936, Knucklehead 1936; steel, CAD (ZnNi process); length: 1-11/16”; thread: #12-24; replaces OEM HD 1408-35; USA; gross weight: 25 g
more …
67-578
67-578
Bracket by Colony; fits 45”/750cc Solo 1936-1952 and Servi-Car 1936-1958; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 27432-36; USA; gross weight: 40 g
more …
67-612
67-612
Bracket by Colony; fits OHV Big Twin 1936-1940; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 1110-36; USA; gross weight: 62 g
more …
67-570
67-570
Bracket by Colony; fits OHV Big Twin 1941-1953; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 27431-41; USA; gross weight: 70 g
more …
67-613
67-613
Bracket by Colony; fits OHV Big Twin 1954-early 1955; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 27431-41A; USA; gross weight: 51 g
more …
67-572
67-572
Bracket by Colony; fits OHV Big Twin mid 1955-1965; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 27431-41B; USA; gross weight: 60 g
more …
67-574
67-574
Bracket by Colony; fits SV Big Twin 1930-1938; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 27034-33; USA; gross weight: 50 g
more …
35-912
35-912
Adapter by Colony; for Fuel line; for Float valve; fits Schebler DLX and Linkert carburetors; steel, chrome-plated; connection thread: 7/16”-27; USA; gross weight: 30 g
more …
67-576
67-576
Bracket by Colony; fits SV Big Twin 1939-1948; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 27430-39; USA; gross weight: 50 g
more …
35-945
35-945
Adapter by Colony; for Fuel line; for Float valve; fits Schebler DLX and Linkert carburetors; steel, CAD (ZnNi process); connection thread: 7/16”-27; USA; gross weight: 28 g
more …
50-117
50-117
Fitting by Colony; for Oil line; for 3/8” ID hoses; steel, chrome-plated, straight; connection thread: 1/8”-27 NPT; replaces OEM HD 63533-41A; USA; gross weight: 19 g
more …
82-918
82-918
Low speed needle »Type 1« by Colony; for Linkert M-series carburetors 1” 1933-1947; steel / brass, CAD (ZnNi process); thread: 1/4”-40; replaces OEM HD 27340-33; USA; gross weight: 30 g
more …
82-920
82-920
Low speed needle »Type 2« by Colony; for Linkert M-series carburetors 1” 1948-1965; steel / brass, CAD (ZnNi process); thread: 1/4”-40; replaces OEM HD 27340-33; USA; gross weight: 40 g
more …
84-265
84-265
Low speed needle »Type 1« by Colony; for Linkert M-series carburetors 1-1/4” & 1-1/2” 1933-1947; steel / brass, CAD (ZnNi process); thread: 1/4”-40; replaces OEM HD 27337-27; USA; gross weight: 35 g
more …
82-917
82-917
Low speed needle »Type 2« by Colony; for Linkert M-series carburetors 1-1/4” & 1-1/2” 1948-1965; steel / brass, CAD (ZnNi process); thread: 1/4”-40; replaces OEM HD 27337-27; USA; gross weight: 40 g
more …
82-950
82-950
High speed needle »Type 4« by Colony; for Linkert M-series carburetors 1-1/2”; fits OHV Big Twin late 1950-1965; steel, zinc plated; replaces OEM HD 27300-50; USA; gross weight: 15 g
more …
64-525
64-525
Motor mount by Colony; fits 750cc 1936-1973; for aluminum cylinder heads; steel, zinc plated, parkerized; position: top; replaces OEM HD 16856-40; USA; gross weight: 198 g
more …
65-770
65-770
Venturi by Colony; M4, M11, M16, M18; aluminum, standard; length: 43.1 mm; for Linkert M-series carburetors; inner Ø: 22.1 mm; outer Ø: 30.1 mm; replaces OEM HD 27360-29; USA; gross weight: 35 g
more …
65-771
65-771
Venturi by Colony; M31, M42, M54, M54B; aluminum, standard; length: 43.6 mm; for Linkert M-series carburetors; inner Ø: 27 mm; outer Ø: 34.9 mm; replaces OEM HD 27361-30; USA; gross weight: 37 g
more …
91-233
91-233
Bushing by Colony; for motor mount; fits 750cc Models 1932-1973; steel, parkerized; replaces OEM HD 16860-40; USA; gross weight: 90 g
more …
65-772
65-772
Venturi by Colony; M2, M5, M21, M41, M51, M52, M55, M58, M64, M65, M84, M97; aluminum, standard; length: 43.6 mm; for Linkert M-series carburetors; inner Ø: 27 mm; outer Ø: 34.9 mm; replaces OEM HD 27362-30; USA; gross weight: 40 g
more …
65-773
65-773
Venturi by Colony; M2, M5, M21, M41, M51, M52, M55, M58, M64, M65, M84, M97; aluminum, oversize + 0.025”; length: 43.6 mm; for Linkert M-series carburetors; inner Ø: 27 mm; outer Ø: 35.4 mm; replaces OEM HD 27362-30; USA; gross weight: 43 g
more …
65-774
65-774
Venturi by Colony; M41L, M51L; aluminum, standard; length: 43.6 mm; for Linkert M-series carburetors; inner Ø: 28.4 mm; outer Ø: 34.9 mm; replaces OEM HD 27363-30; USA; gross weight: 36 g
more …
65-775
65-775
Venturi by Colony; M61B, M61, M36A, M36, M35, M35T, M35TP; aluminum, standard; length: 43.3 mm; for Linkert M-series carburetors; inner Ø: 28.5 mm; outer Ø: 39.6 mm; replaces OEM HD 27363-40; USA; gross weight: 53 g
more …
65-776
65-776
Venturi by Colony; M61B, M61, M36A, M36, M35, M35T, M35TP; aluminum, oversize + 0.025”; length: 43.3 mm; for Linkert M-series carburetors; inner Ø: 28.5 mm; outer Ø: 40.1 mm; replaces OEM HD 27363-40; USA; gross weight: 56 g
more …
65-777
65-777
Venturi by Colony; M74B, M74, M45A, M45; aluminum, standard; length: 43.3 mm; for Linkert M-series carburetors; inner Ø: 30.3 mm; outer Ø: 39.7 mm; replaces OEM HD 27363-41; USA; gross weight: 38 g
more …
65-778
65-778
Venturi by Colony; M74B, M74, M45A, M45; aluminum, oversize + 0.025”; length: 43.3 mm; for Linkert M-series carburetors; inner Ø: 30.3 mm; outer Ø: 40.1 mm; replaces OEM HD 27363-41; USA; gross weight: 41 g
more …
65-779
65-779
Venturi by Colony; M88, M90, M641; aluminum, standard; length: 43.6 mm; for Linkert M-series carburetors; inner Ø: 23.9 mm; outer Ø: 34.9 mm; replaces OEM HD 27364-41; USA; gross weight: 48 g
more …
77-700
77-700
Bolt kit by Colony; for Sprocket cover; fits 750cc 1933-1973; steel, CAD (ZnNi process); replaces OEM HD 34892-33, 34890-33, and 34891-33; USA; gross weight: 160 g
more …
85-870
85-870
Stud kit by Colony; for Top cover; fits IOE and V models 1915-1930; steel, nickel-plated; thread: 5/16”-18 / 5/16”-24; wrench size: 7/16 ”; replaces OEM HD 2267-15, 0112, and 0213; USA; gross weight: 145 g
more …
86-468
86-468
Bolt kit by Colony; for Sprocket cover; fits 750cc 1933-1973; steel, parkerized; replaces OEM HD 34890-33, and 34891-33; USA; gross weight: 100 g
more …
85-871
85-871
Stud kit by Colony; for Top cover; fits IOE and V models 1915-1930; steel, parkerized; thread: 5/16”-18 / 5/16”-24; wrench size: 7/16 ”; replaces OEM HD 2267-15, 0112, and 0213; USA; gross weight: 144 g
more …
77-701
77-701
Bolt kit by Colony; for top cover and side cover; fits 750cc 1933-1963; steel, CAD (ZnNi process); replaces OEM HD 1206, and 2278; USA; gross weight: 60 g
more …
85-387
85-387
Bolt kit by Colony; for Sprocket cover; fits 750cc 1929-1964; steel, chrome-plated; replaces OEM HD 2278; USA; gross weight: 40 g
more …
85-874
85-874
Stud kit by Colony; for Top cover; fits V models 1931-1936; steel, parkerized; thread: 5/16”-18 / 5/16”-24; wrench size: 7/16 ”; replaces OEM HD 2267-15, 2267-31, 0112, and 0213; USA; gross weight: 150 g
more …
85-388
85-388
Bolt kit by Colony; for Sprocket cover; fits 750cc 1929-1964; steel, CAD (ZnNi process); replaces OEM HD 2278; USA; gross weight: 40 g
more …
85-872
85-872
Stud kit by Colony; for Starter cover; fits IOE and V models 1915-1930; steel, nickel-plated; thread: 5/16”-18 / 5/16”-24; wrench size: 7/16 ”; replaces OEM HD 2267-15, 0112, and 0213; USA; gross weight: 101 g
more …
85-873
85-873
Stud kit by Colony; for Starter cover; fits IOE and V models 1915-1930; steel, parkerized; thread: 5/16”-18 / 5/16”-24; wrench size: 7/16 ”; replaces OEM HD 2267-15, 0112, and 0213; USA; gross weight: 100 g
more …
85-875
85-875
Stud kit by Colony; for Starter cover; fits V models 1931-1936; steel, parkerized; thread: 5/16”-18 / 5/16”-24; wrench size: 7/16 ”; replaces OEM HD 2267-15, 2267-31, 0112, and 0213; USA; gross weight: 120 g
more …
84-394
84-394
Vent screw by Colony; for Transmission; fits FL 1956-1978, FX 1971-1979; steel, CAD (ZnNi process); thread: 1/4”-24; thread: 1/4”-24; slotted; replaces OEM HD 34720-56; USA; gross weight: 9.6 g
more …
75-108
75-108
Stop plate by Colony; fits 4-speed Big Twin 1936-early 1978; steel, parkerized; with 2 screws; replaces OEM HD 33353-36, and 1864; USA; gross weight: 45 g
more …
83-131
83-131
Bolt kit by Colony; for Crankcases; fits Shovelhead 1970-1978; steel, CAD (ZnNi process) / parkerized; replaces OEM HD 4432, 4806, 24815-40, 24805-30, 7753, and 6774; USA; gross weight: 519 g
more …
83-108
83-108
Bolt kit by Colony; for Crankcases; fits Shovelhead 1970-1978; steel, chrome-plated / parkerized; hex; replaces OEM HD 4432, 4806, 24815-40, 24805-30, 7753, and 6774; USA; gross weight: 520 g
more …
83-132
83-132
Bolt kit by Colony; for Crankcases; fits Shovelhead/Evo Big Twin 1979-1995; steel, CAD (ZnNi process) / parkerized; replaces OEM HD 3427, 3504, 3428, 3430, 7753, and 6774; USA; gross weight: 475 g
more …
83-110
83-110
Bolt kit by Colony; for Crankcases; fits Shovelhead/Evo Big Twin 1979-1995; steel, chrome-plated / parkerized; hex; replaces OEM HD 3427, 3504, 3428, 3430, 7753, and 6774; USA; gross weight: 500 g
more …
84-829
84-829
Stud kit by Colony; for Cylinder base; fits 45”/750cc models 1929-1973; transmission case Big Twins 1966-69; steel, parkerized; length: 1-13/16”; thread: 3/8”-16 / 3/8”-24; replaces OEM HD 16830-29A; USA; gross weight: 176 g
more …
84-834
84-834
Stud kit by Colony; for Cylinder base; fits K model and Sportster 1954-1985; steel, parkerized; length: 2-5/16”; thread: 3/8”-16 / 3/8”-24; replaces OEM HD 16830-72, and 16830-54; USA; gross weight: 220 g
more …
50-238
50-238
Sleeve nut by Colony; steel, CAD (ZnNi process); thread: 9/16”-24; USA; gross weight: 15 g
more …
84-832
84-832
Stud kit by Colony; for Cylinder base; fits Big Twin 1978-1984; steel, parkerized; length: 2-9/32”; thread: 7/16”-14 / 7/16”-20; replaces OEM HD 16837-78; USA; gross weight: 300 g
more …
65-781
65-781
Float valve by Colony; fits models 1933-1965; brass / steel; thread: 7/16”-20 / 7/16”-28; with fiber washer; replaces OEM HD 27382-33; USA; gross weight: 37 g
more …
80-699
80-699
Adjusting nut by Colony; for Spring / Clutch; fits 45”/750 cc and Big Twins 1941-1946; steel, bare; thread: 5/16”-24; wrench size: 1/2 ”; with tab washers; replaces OEM HD 7780, and 38110-41; USA; gross weight: 38 g
more …
67-112
67-112
Axle by Colony; for Float; fits models 1916-1965; bronze, CAD (ZnNi process); for Linkert M and Schebler DLX carburetors; replaces OEM HD 27383-11, and 27384-16; USA; gross weight: 16 g
more …
65-805
65-805
Choke lever by Colony; fits Knucklehead 1936-1937; steel, nickel-plated / parkerized; for Linkert M-series carburetors; replaces OEM HD 1233-36; USA; gross weight: 51.2 g
more …
65-808
65-808
Choke lever by Colony; fits Big Twin 1938-1965; steel, parkerized; for Linkert M-series carburetors; replaces OEM HD 1233-38; USA; gross weight: 46.6 g
more …
65-809
65-809
Choke lever by Colony; fits FL(H), XLH, XLCH 1966; CAD (ZnNi process); for Linkert DC carburetors; replaces OEM HD 27221-66; USA; gross weight: 43.2 g
more …
50-232
50-232
Fitting by Colony; for case ventilation / rear chain oiler; fits Big Twin 1970-1978; for 3/8” ID hoses; steel, zinc plated; connection thread: 1/4”-18 NPT; replaces OEM HD 63541-70; USA; USA; gross weight: 78 g
more …
75-044
75-044
Mounting kit »OEM Style« by Colony; for Kicker pedal; fits all models 1917-1941; steel, parkerized; replaces OEM HD 2100-16, 2101-31, and 2102-30; USA; gross weight: 38 g
more …
75-047
75-047
Mounting kit »OEM Style 1035 CP« by Colony; for Kicker pedal; fits all models 1942-1977; steel, parkerized; replaces OEM HD 33213-31, 4336, 33215-30, and 7045; USA; gross weight: 38 g
more …
80-206
80-206
Oil seal by Colony; for Sprocket shaft / Crankcases; fits Big Twin 1940-1954; steel / rubber; with spring ring; replaces OEM HD 421-40, 423-40, 24776-40, and 24702-40; USA; gross weight: 30 g
more …
75-358
75-358
Studs by Colony; for Bicycle Style kicker pedal; fits 1917-1962; steel, parkerized; replaces OEM HD 2093-17, and 33190-17; USA; gross weight: 68 g
more …
75-359
75-359
Studs by Colony; for Bicycle Style kicker pedal; fits 1917-1962; steel, CAD (ZnNi process); replaces OEM HD 2093-17, and 33190-17; USA; gross weight: 69 g
more …
80-210
80-210
Oil seal by Colony; for Sprocket shaft / Crankcases; fits Big Twin 1955-1968; steel / rubber, LH thread; with threaded insert; replaces OEM HD 24031-55; USA; gross weight: 10 g
more …
75-048
75-048
Axle by Colony; for Bicycle Style kicker pedal; fits 1917-1962; steel, CAD (ZnNi process); replaces OEM HD 2095-16, and 33192-16; USA; gross weight: 193 g
more …
75-049
75-049
Axle by Colony; for Bicycle Style kicker pedal; fits 1917-1962; steel, parkerized; replaces OEM HD 2095-16, and 33192-16; USA; gross weight: 190 g
more …
85-367
85-367
Nipple by Colony; for Throttle cable; fits models →1975; steel, CAD (ZnNi process), Ø head = 7/16”, Ø shank = 3/16”; length: 5/8”; for Linkert/Tillotson/Bendix carburetors; with screw, two washers and cotter pin; replaces OEM HD 510, 1058W, 61887W, 27450-36, and 27715-67; USA; gross weight: 20 g
more …
80-765
80-765
Sleeve nut by Colony; for gear case; fits Sportster 1954-1978; steel, CAD (ZnNi process); thread: 5/8”-12; replaces OEM HD 24918-52A; USA; gross weight: 32 g
more …
85-515
85-515
Adjustment bolts by Colony; for Rear axle; fits 45" (750cc) models 1930-1952; steel, chrome-plated; with nuts; replaces OEM HD 41575-30, and 7752; USA; gross weight: 70 g
more …
85-516
85-516
Adjustment bolts by Colony; for Rear axle; fits 45" (750cc) models 1930-1952; steel, CAD (ZnNi process); with nuts; replaces OEM HD 41575-30, and 7752; USA; gross weight: 70 g
more …
85-519
85-519
Adjustment bolts by Colony; for Rear axle; fits 45" (750cc) models 1930-1952; steel, parkerized; with nuts; replaces OEM HD 41575-30, and 7752; USA; gross weight: 70 g
more …
85-510
85-510
Adjustment bolts by Colony; for Rear axle; fits Big Twin 1936-1972; steel, chrome-plated; with nuts; replaces OEM HD 41576-36; USA; gross weight: 108 g
more …
85-513
85-513
Adjustment bolts by Colony; for Rear axle; fits Big Twin 1936-1972; steel, CAD (ZnNi process); with nuts; replaces OEM HD 41576-36; USA; gross weight: 110 g
more …
85-511
85-511
Adjustment bolts by Colony; for Rear axle; fits Big Twin 1936-1972; steel, parkerized; with nuts; replaces OEM HD 41576-36; USA; gross weight: 100 g
more …
80-696
80-696
Support strap by Colony; for Adjusting screw; fits 4-speed Big Twin 1936-1964; steel, chrome-plated; replaces OEM HD 47720-36; USA; gross weight: 94 g
more …
80-697
80-697
Support strap by Colony; for Adjusting screw; fits 4-speed Big Twin 1936-1964; steel, parkerized; replaces OEM HD 47720-36; USA; gross weight: 94 g
more …
85-517
85-517
Adjustment bolts by Colony; for Rear axle; fits K-Models 1952-1956 and Sportster 1957-1978; steel, zinc plated; with nuts; replaces OEM HD 39985-52; USA; gross weight: 100 g
more …
85-512
85-512
Adjustment bolts by Colony; for Rear axle; fits Softail 1986-1992; steel, chrome-plated; thread: 3/8”-16; length: 2-1/2 ”; wrench size: 9/16 ”; with nuts; replaces OEM HD 47579-86; USA; gross weight: 100 g
more …
86-229
86-229
Stud kit by Colony; for Outer primary chain guard; fits V models 1930-1936; steel, CAD (ZnNi process) / parkerized; thread: 3/8”-16 / 5/16”-24; replaces OEM HD 472-30, and 0117; USA; gross weight: 40 g
more …
85-514
85-514
Adjustment bolts by Colony; for Rear axle; fits Softail 1993-1999; steel, chrome-plated; thread: 3/8”-16; length: 3 ”; wrench size: 9/16 ”; with nuts; replaces OEM HD 47579-93; USA; gross weight: 100 g
more …
85-533
85-533
Adjustment bolts by Colony; for Rear axle; fits Softail 2000-2007; steel, chrome-plated; thread: 3/8”-16; length: 3 ”; wrench size: 9/16 ”; with nuts; replaces OEM HD 47579-00; USA; gross weight: 100 g
more …
84-346
84-346
Adjustment bolts by Colony; for Rear axle; fits Softail 2008→; steel, chrome-plated; thread: 3/8”-16; length: 3 ”; wrench size: 9/16 ”; with nuts; replaces OEM HD 4433; USA; gross weight: 86 g
more …
84-347
84-347
Adjustment bolts by Colony; for Rear axle; fits Dyna 2006→; steel, chrome-plated; thread: 3/8”-16; length: 40 mm; wrench size: 9/16 ”; with nuts; replaces OEM HD 45991-06; USA; gross weight: 61 g
more …
27-692
27-692
Bushing kit by Colony; for Shifter shaft; fits K-model and Sportster 1952-1974; red bronze; length: 19 mm; ID x OD: 12 x 16 mm; with oil seal; replaces OEM HD 34037-52, and 34035-52; USA; gross weight: 31 g
more …
74-089
74-089
Lock screw by Colony; for shifter cam shaft; fits Knucklehead 1936, Big Twins 1937–early 1979; steel; with gasket; replaces OEM HD 2244-36A, and 34050-36; USA; gross weight: 11 g
more …
74-067
74-067
Shifter pawl by Colony; for shifter drum; fits Big Twins 1952–early 1976; steel, parkerized; with bolt, spring and tab washer; replaces OEM HD 34062-52, 34064-52, 34068-52A, and 34066-52; USA; gross weight: 57 g
more …
79-482
79-482
Snap ring by Colony; for Bearing / Crankcases; fits Big Twin 1940-1953; spring steel; replaces OEM HD 24702-40; USA; gross weight: 2 g
more …
74-092
74-092
Screw kit by Colony; for shifter pawl carrier cover; fits 4-speed Big Twin 1952–early 1979; steel, CAD (ZnNi process); replaces OEM HD 1764W, 1767W, 1772W, 1775, and 1780; USA; gross weight: 40 g
more …
75-088
75-088
Mounting bolt by Colony; for Kickstart spring; fits Sportster 1971-1978; steel, CAD (ZnNi process); thread: 3/8”-16; thread: 3/8”-16; replaces OEM HD 33088-71; gross weight: 33 g
more …
77-216
77-216
Nut by Colony; for Transmission sprocket / Pulley; fits IOE Twins and V-models 1915-1936; steel, parkerized; 5/32” thick; thread: 1-1/2”-24 LH; with tab washer; replaces OEM HD 2335-15, and 2337-15; USA; gross weight: 49 g
more …
77-212
77-212
Nut by Colony; for Transmission sprocket / Pulley; fits Sportster 1991-1992, Big Twin 1936-1992; steel, parkerized; 1/4” thick; thread: 1-1/2”-24 LH; with tab washer; replaces OEM HD 35211-36; USA; gross weight: 10 g
more …
84-859
84-859
Drain plug by Colony; for Big Twin primary housings 1987-2003 and Evolution Softail transmissions 1993-99; steel, zinc plated, magnetic; socket head; thread: 1/8”-27 NPT; wrench size: 3/16 ”; replaces OEM HD 739A; USA; gross weight: 15 g
more …
84-858
84-858
Drain plug by Colony; primary housing Dyna 2004-2005, Softail 2004-2006; steel, zinc plated, magnetic; socket head; thread: 3/8”-24; wrench size: 3/16 ”; with O-ring; replaces OEM HD 60391-04; USA; gross weight: 6 g
more …
60-420
60-420
Nut by Colony; for Motor sprocket; fits Big Twin 1930-1954; steel; wrench size: 1-1/16 ”; thread: 11/16”-18; replaces OEM HD 24003-30; USA; gross weight: 50 g
more …
60-422
60-422
Nut by Colony; for Motor sprocket; fits Big Twin 1955-1971; steel, zinc plated; wrench size: 1-3/8 ”; thread: 7/8”-14; replaces OEM HD 24003-55; USA; NOTE: Factory equipment →1971. Can be used on later models without compensating sprocket.; gross weight: 80 g
more …
64-344
64-344
Adapter by Colony; for Solid lifter kit; steel, IH = 17,2 mm; USA; gross weight: 90 g
more …
64-299
64-299
Adjusting screws by Colony; for Valve; fits Flathead models 1929-1973, K models 1952-1953; steel, parkerized; thread: 9/32”-32; with self-lock nut; replaces OEM HD 221-15A, and 18556-40; USA; gross weight: 59 g
more …
85-269
85-269
Plug by Colony; for Relief valve; fits Big Twin/K-Models 1952-1954; steel, CAD (ZnNi process); hex head with slot; thread: 1/2”-20; with spring and ball; replaces OEM HD 26423-52A, and 26374-52; USA; gross weight: 36 g
more …
64-298
64-298
Counter nut by Colony; fits all models thru 1985 except Evolution; steel, parkerized; height: 5.9 mm; thread: 9/32”-32; replaces OEM HD 18570-38; USA; gross weight: 3 g
more …
84-282
84-282
Bolt/screw kit by Colony; for Handlebar controls / Hand brake master cylinder; fits all models 1982-1995; steel, chrome-plated; socket head; replaces OEM HD 2579, 4015, and 4033; USA; gross weight: 50 g
more …
84-283
84-283
Bolt/screw kit by Colony; for Handlebar controls / Hand brake master cylinder; fits Softail and Dyna 1996-2017, Touring 1996-2007, Sportster 1996-2003; steel, chrome-plated; hex socket button head; replaces OEM HD 4132, 2579, and 6101; USA; gross weight: 50 g
more …
81-106
81-106
Bushing kit by Colony; for Clutch release lever; fits Big Twin 1936-1984; steel, parkerized / CAD (ZnNi process); replaces OEM HD 33290-38, and 33290-36; gross weight: 117 g
more …
84-629
84-629
Mounting kit by Colony; for S&S Super E; steel, chrome-plated; socket head; USA; gross weight: 40 g
more …
86-081
86-081
Valve spring cover by Colony; fits Singles 1926-1934, 45”/75 cc 1929; steel, nickel-plated, wrench size: 1-1/2”; with seals; replaces OEM HD 173-26, and 174-26; USA; NOTE: 45” models require 2 kits.; gross weight: 248 g
more …
84-206
84-206
Valve spring cover by Colony; fits 45”/750cc Flathead 1941-1973, except K-models; steel, CAD (ZnNi process), wrench size: 1-3/8”; replaces OEM HD 18235-31; USA; gross weight: 510 g
more …
84-207
84-207
Valve spring cover by Colony; fits 45”/750cc Flathead 1941-1973, except K-models; steel, chrome-plated, wrench size: 1-3/8”; replaces OEM HD 18235-31; USA; gross weight: 501.6 g
more …
90-719
90-719
Retainer clip by Colony; for Pushrod covers; fits Knucklehead 1940-1947, Shovelhead 1966-1984, Evo Big Twin 1984-1999; steel, chrome-plated; length: 84 mm; replaces OEM HD 17949-40, and 17950-66; USA; gross weight: 20 g
more …
84-974
84-974
Retainer clip by Colony; for Pushrod covers; fits Knucklehead 1940-1947, Shovelhead 1966-1984, Evo Big Twin 1984-1999; steel, CAD (ZnNi process); length: 84 mm; replaces OEM HD 17949-40, and 17950-66; USA; USA; gross weight: 15 g
more …
84-975
84-975
Retainer clip by Colony; for Pushrod covers; fits Knucklehead 1940-1947, Shovelhead 1966-1984, Evo Big Twin 1984-1999; steel, parkerized; length: 84 mm; replaces OEM HD 17949-40, and 17950-66; USA; USA; gross weight: 14 g
more …
90-718
90-718
Retainer clip by Colony; for Pushrod covers; fits Sportster 1986-1990; steel, chrome-plated; length: 71 mm; replaces OEM HD 17950-86; USA; USA; gross weight: 16 g
more …
60-615
60-615
Nut by Colony; for Crank pin; fits 61” OHV 1936-1952, 74”+80” SV 1937-1948; steel, parkerized; wrench size: 1-3/16 ”; thread: 7/8”-18; replaces OEM HD 366-36, and 23966-36; USA; gross weight: 62 g
more …
60-619
60-619
Nut by Colony; for Crank pin; fits Big Twin 74 cui OHV 1941-1953; steel, parkerized; wrench size: 1-5/16 ”; thread: 1”-18; replaces OEM HD 23967-41; USA; gross weight: 61 g
more …
60-559
60-559
Nut by Colony; for Crank pin; fits Big Twin 1954-early 1981; steel, parkerized; wrench size: 1-5/16 ”; thread: 1”-18; replaces OEM HD 23966-54A; USA; gross weight: 40 g
more …
60-427
60-427
Nut by Colony; for Crank pin; fits Big Twin 1983-1999; steel, parkerized; wrench size: 1-1/2 ”; thread: 1”-20; 2 pieces; replaces OEM HD 23969-83; USA; gross weight: 50 g
more …
86-323
86-323
Bolt/screw kit by Colony; for Cylinder head; fits Evo Big Twin late 1985-1991, Sportster 1986-1992; steel, chrome-plated, length: 81 mm and 43 mm; 12-point head with flange; thread: 3/8”-16; wrench size: 1/2 ”; replaces OEM HD 16478-85A, and 16480-85A; USA; gross weight: 660 g
more …
86-324
86-324
Bolt/screw kit by Colony; for Cylinder head; fits Big Twin Evolution/Twin Cam 1992→ and Evolution Sportster 1993→; steel, chrome-plated, length: 81 mm and 47 mm; 12-point head with flange; thread: 3/8”-16; wrench size: 1/2 ”; replaces OEM HD 16478-85A, and 16480-92; USA; gross weight: 680 g
more …
84-920
84-920
Studs by Colony; for Luggage carrier; fits Big Twin 1930-1957; steel, parkerized; replaces OEM HD 2821-30, and 4634; USA; gross weight: 135 g
more …
85-256
85-256
Bolt kit by Colony; for Rocker housings; for steel D-rings; fits Panhead 1951-1954; steel, CAD (ZnNi process) / parkerized; length: 1/2”; Phillips button head; thread: #10-24; replaces OEM HD 2674, and 2678; USA; gross weight: 77 g
more …
84-921
84-921
Studs by Colony; for Luggage carrier; fits 45”/750 cc Twins and Singles 1926-1941; steel, parkerized; replaces OEM HD 2820-26; USA; gross weight: 129 g
more …
84-922
84-922
Studs by Colony; for Luggage carrier; fits 45”/750 cc Twins 1942-1952; steel, parkerized; replaces OEM HD 2820-42, and 53433-42; USA; gross weight: 132 g
more …
86-368
86-368
Bolt kit by Colony; for Rocker housings; for aluminum D-rings; fits Panhead late1954-1965; steel, CAD (ZnNi process); hex with flange; thread: #10-24; length: 1-1/4 ” (32 mm); replaces OEM HD 3578W; USA; gross weight: 130 g
more …
86-258
86-258
Bolt kit by Colony; for Rocker housings; for aluminum D-rings; fits Panhead late1954-1965; steel, chrome-plated; hex with flange; thread: #10-24; length: 1-1/4 ” (32 mm); replaces OEM HD 3578W; USA; gross weight: 130 g
more …
60-899
60-899
Washer kit by Colony; for Rocker arm; fits Knucklehead 1936-47; steel; 8 pieces; replaces OEM HD 120-38B, 123-36, 17482-36, and 17465-36; USA; gross weight: 40 g
more …
85-687
85-687
Bolt kit »oversize« by Colony; for Rocker housings; for aluminum D-rings; fits Panhead late1954-1965; steel, CAD (ZnNi process); hex with flange; thread: 1/4”-20; length: 1-1/4 ” (32 mm); replaces OEM HD 3578W; USA; gross weight: 58 g
more …
85-686
85-686
Bolt kit »oversize« by Colony; for Rocker housings; for aluminum D-rings; fits Panhead late1954-1965; steel, chrome-plated; hex with flange; thread: 1/4”-20; length: 1-1/4 ” (32 mm); replaces OEM HD 3578W; USA; gross weight: 59 g
more …
86-370
86-370
Bolt kit by Colony; for Rocker housings; for steel D-rings; fits Panhead 1948-1965; steel, CAD (ZnNi process); hex with flange; thread: #10-24; length: 11/16 ” (17 mm); USA; gross weight: 100 g
more …
86-260
86-260
Bolt kit by Colony; for Rocker housings; for steel D-rings; fits Panhead 1948-1965; steel, chrome-plated; hex with flange; thread: #10-24; length: 11/16 ” (17 mm); USA; gross weight: 100 g
more …
85-688
85-688
Bolt kit »oversize« by Colony; for Rocker housings; for steel D-rings; fits Panhead 1948-1965; steel, chrome-plated; hex with flange; thread: 1/4”-20; length: 11/16 ” (17 mm); USA; gross weight: 41 g
more …
85-689
85-689
Bolt kit »oversize« by Colony; for Rocker housings; for steel D-rings; fits Panhead 1948-1965; steel, CAD (ZnNi process); hex with flange; thread: 1/4”-20; length: 11/16 ” (17 mm); USA; gross weight: 41 g
more …
50-236
50-236
Sleeve nuts by Colony; for Oil lines; for lower valve covers; fits Knucklehead 1938-1947; steel; USA; gross weight: 37 g
more …
85-055
85-055
Bolt/screw kit »Custom Knucklehead Style« by Colony; for Rocker arm shaft; fits Shovelhead 1971-1984, Sportster 1971-1985; right; steel, chrome-plated; acorn hex head; thread: 1/2”-20; replaces OEM HD 17448-71A; USA; gross weight: 260 g
more …
85-050
85-050
Bolt/screw kit »Custom Knucklehead Style« by Colony; for Rocker arm shaft; fits Shovelhead 1966-early 1971, Sportster 1957-early 1971; right; steel, chrome-plated; acorn hex head; thread: 5/16”-24; replaces OEM HD 17448-57; USA; gross weight: 230 g
more …
86-170
86-170
Bolt/screw kit »Custom Hex Head« by Colony; for Rocker arm shaft; fits Shovelhead 1971-1984, Sportster 1971-1985; right; steel, chrome-plated; cap hex head; thread: 1/2”-20; replaces OEM HD 17448-71A; USA; gross weight: 90 g
more …
60-435
60-435
Nut by Colony; for Pinion shaft OHV 1936 and Big Twin 1937-1981, Sprocket shaft Big Twin 1930-1971; steel, parkerized; wrench size: 1-3/16 ”; thread: 3/4”-18; replaces OEM HD 24023-36; USA; gross weight: 30 g
more …
86-360
86-360
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1936-1969; steel, CAD (ZnNi process); slotted; thread: 1/4”-24; length: 1-1/8 ” (29 mm); replaces OEM HD 2341; USA; gross weight: 90 g
more …
86-461
86-461
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1936-1969; steel, parkerized; slotted; thread: 1/4”-24; length: 1-1/8 ” (29 mm); replaces OEM HD 2341; USA; gross weight: 90 g
more …
86-250
86-250
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1936-1969; steel, chrome-plated; oval countersunk head with slot; thread: 1/4”-24; length: 1-1/8 ” (29 mm); replaces OEM HD 2341; USA; gross weight: 100 g
more …
86-027
86-027
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1950-1952; steel, CAD (ZnNi process); countersunk head Phillips; thread: 1/4”-24; length: 1-1/8 ” (29 mm); replaces OEM HD 2341; USA; gross weight: 92 g
more …
86-077
86-077
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1950-1952; steel, chrome-plated; countersunk head Phillips; thread: 1/4”-24; length: 1-1/8 ” (29 mm); replaces OEM HD 2341; USA; gross weight: 10 g
more …
84-005
84-005
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1936-1969; steel, chrome-plated; socket head; thread: 1/4”-24; length: 1-1/8 ” (29 mm); replaces OEM HD 2341; USA; gross weight: 90 g
more …
69-327
69-327
Locking plate by Colony; for Crank pin; fits all models 1912-1929, Singles 1930-1934, 45 cui/750cc 1929-1973; steel, parkerized; 4 pieces; with lock screws; replaces OEM HD 368-12, and 23982-12; USA; gross weight: 21 g
more …
85-075
85-075
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1936-1969; steel, chrome-plated; acorn hex head; thread: 1/4”-24; length: 1-1/8 ” (29 mm); replaces OEM HD 2341; USA; gross weight: 220 g
more …
69-328
69-328
Locking plate by Colony; for Pinion shaft / Sprocket shaft; fits 45 cui/750cc 1929-1973; steel, parkerized; 4 pieces; with lock screws; replaces OEM HD 24016-29; USA; gross weight: 28 g
more …
86-361
86-361
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1936-1969; steel, CAD (ZnNi process), on aftermarket case; slotted; thread: 1/4”-20; length: 1-1/8 ” (29 mm); USA; gross weight: 94 g
more …
86-362
86-362
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1936-1969; steel, parkerized, on aftermarket case; slotted; thread: 1/4”-20; length: 1-1/8 ” (29 mm); USA; gross weight: 72 g
more …
69-329
69-329
Locking plate by Colony; for Pinion shaft / Sprocket shaft / Crank pin; fits 61” OHV 1936-1952 and 74”+80” SV 1937-1948: all shafts; Big Twin OHV 1936-1971, Big Twin Sidevalve 1937-1948 and Sportster 1957-1980: sprocket shaft; Big Twin OHV 1936-1980, Big Twin Sidevalve 1937-1948 and Sportster 1957-1980: pinion shaft; steel, parkerized; 4 pieces; with lock screws; replaces OEM HD 370-36, and 24015-36; USA; gross weight: 24 g
more …
84-006
84-006
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1970-1992; steel, chrome-plated; socket head; replaces OEM HD 1305, 1301, and 1308; USA; gross weight: 70 g
more …
69-333
69-333
Locking plate by Colony; for Crank pin; fits Big Twin 74“ OHV 1941-1953, Sportster 1957-1980; steel, parkerized; 4 pieces; with lock screws; replaces OEM HD 23971-41; USA; gross weight: 24 g
more …
85-080
85-080
Bolt/screw kit by Colony; for Gear cover; fits Big Twin 1970-1992; steel, chrome-plated; acorn hex head; replaces OEM HD 1305, 1301, and 1308; USA; gross weight: 150 g
more …
69-335
69-335
Locking plate by Colony; for Crank pin; fits 1936-1940 61” OHV, 1937-1940 74” and 80” SV; steel, parkerized; 4 pieces; with OEM# 030 lock screws; replaces OEM HD 369-36, 370-36, 23970-36, and 24015-36; USA; gross weight: 27 g
more …
86-047
86-047
Bolt/screw kit by Colony; for Gear cover; fits Sportster 1957-1970; steel, CAD (ZnNi process); oval countersunk head with slot; replaces OEM HD 2345, 2352, and 2353; USA; gross weight: 116 g
more …
86-061
86-061
Bolt/screw kit by Colony; for Gear cover; fits Sportster 1971-1980; steel, CAD (ZnNi process); fillister head Phillips; replaces OEM HD 911, 912, and 914; USA; gross weight: 102 g
more …
84-275
84-275
Bolt/screw kit by Colony; for Gear cover; fits Sportster 1971-1985; steel, chrome-plated; socket head; replaces OEM HD 3479, 3480, and 3482; USA; gross weight: 120 g
more …
84-279
84-279
Bolt/screw kit by Colony; for Gear cover; fits Sportster 1986-2003; steel, chrome-plated; socket head; replaces OEM HD 1797R, 3479, 3480, and 3482; USA; gross weight: 160 g
more …
84-273
84-273
Bolt/screw kit by Colony; for Gear cover; fits Sportster 2004-2021; steel, chrome-plated; socket head; replaces OEM HD 3480A, 4740A, and 4717A; USA; gross weight: 159.4 g
more …
84-703
84-703
Bolt/screw kit by Colony; for Tappet guide; fits Big Twin late 1976-1998 (Softail →1999); steel, CAD (ZnNi process); 12-point head; thread: 1/4”-20; length: 7/8 ” (22 mm); replaces OEM HD 3770; USA; gross weight: 60 g
more …
84-702
84-702
Bolt/screw kit by Colony; for Tappet guide; fits Big Twin late 1976-1998 (Softail →1999); steel, chrome-plated; 12-point head; thread: 1/4”-20; length: 7/8 ” (22 mm); with serrated washers; replaces OEM HD 3770; USA; gross weight: 60 g
more …
84-001
84-001
Bolt/screw kit by Colony; for Tappet guide; fits Big Twin late 1976-1998 (Softail →1999); steel, chrome-plated; socket head; thread: 1/4”-20; length: 7/8 ” (22 mm); with washers; replaces OEM HD 3770; USA; gross weight: 70 g
more …
85-190
85-190
Bolt/screw kit by Colony; for Tappet guide; fits Big Twin late 1976-1998 (Softail →1999); steel, chrome-plated; cap hex head; thread: 1/4”-20; length: 7/8 ” (22 mm); with serrated washers; replaces OEM HD 3770; USA; gross weight: 80 g
more …
86-118
86-118
Bolt/screw kit by Colony; for Tappet guide; fits Sportster 1957-1985; steel, CAD (ZnNi process); hex; thread: 5/16”-18; length: 1 ” (25 mm); replaces OEM HD 4017; USA; gross weight: 60 g
more …
86-119
86-119
Bolt/screw kit by Colony; for Tappet guide; fits Sportster 1957-1985; steel, CAD (ZnNi process), CP 1038; hex; thread: 5/16”-18; length: 1 ” (25 mm); replaces OEM HD 4017; USA; gross weight: 62 g
more …
85-028
85-028
Bolt/screw kit by Colony; for Tappet guide; fits Sportster 1957-1985; steel, chrome-plated; acorn hex head; thread: 5/16”-18; length: 1 ” (25 mm); replaces OEM HD 4017; USA; gross weight: 90 g
more …
84-003
84-003
Bolt/screw kit by Colony; for Tappet guide; fits Sportster 1957-1985; steel, chrome-plated; socket head; thread: 5/16”-18; length: 1 ” (25 mm); replaces OEM HD 4017; USA; gross weight: 60 g
more …
84-290
84-290
Bolt/screw kit by Colony; for Tappet guide; fits Sportster 1991-1994; steel, chrome-plated; socket head; thread: 5/16”-18; length: 1-1/4 ” (32 mm); replaces OEM HD 3201WA; USA; gross weight: 70 g
more …
84-010
84-010
Bolt/screw kit by Colony; for Tappet guide; fits Sportster 1995-2003; steel, chrome-plated; socket head; thread: 5/16”-18; length: 11/16 ” (17 mm); replaces OEM HD 3228A; USA; gross weight: 50 g
more …
86-232
86-232
Mounting kit by Colony; for Oil pump; fits Sportster 1954-1976; steel, chrome-plated; hex; replaces OEM HD 7036, 7676, and 24819-52; USA; gross weight: 20 g
more …
86-342
86-342
Mounting kit by Colony; for Oil pump; fits Sportster 1954-1976; steel, CAD (ZnNi process); hex; replaces OEM HD 7036, 7676, and 24819-52; USA; gross weight: 100 g
more …
84-285
84-285
Mounting kit by Colony; for Oil pump; fits Sportster 1977-1990; steel, chrome-plated; socket head; replaces OEM HD 3478, and 7036; USA; gross weight: 80 g
more …
86-332
86-332
Bolt kit by Colony; for upper + lower motor mount; fits Big Twin OHV 1936-1969; steel, CAD (ZnNi process), CP1038-stamped heads; hex; replaces OEM HD 24791-36, 4435W, 7775, 4660, 6520, and 7825; USA; gross weight: 390 g
more …
86-432
86-432
Bolt kit by Colony; for upper + lower motor mount; fits Big Twin OHV 1936-1969; steel, parkerized, CP1038-stamped heads; hex; replaces OEM HD 24791-36, 4435W, 7775, 4660, 6520, and 7825; USA; gross weight: 390 g
more …
86-222
86-222
Bolt kit by Colony; for upper + lower motor mount; fits Big Twin OHV 1936-1969; steel, chrome-plated; hex; replaces OEM HD 24791-36, 4435W, 7775, 4660, 6520, and 7825; USA; gross weight: 390 g
more …
84-494
84-494
Mounting kit »Military« by Colony; for Tool box; fits Big Twin 1940-1945; steel, parkerized; replaces OEM HD 3457-40M, and 3457-40M; USA; gross weight: 62.8 g
more …
86-434
86-434
Bolt kit by Colony; for upper + lower motor mount; fits Evolution Softail 1984-1999; steel, zinc plated; hex; replaces OEM HD 4726, 7775, 2879W, 4416, 3512, and 7506; USA; gross weight: 400 g
more …
86-433
86-433
Bolt kit by Colony; for upper + lower motor mount; fits Evolution Softail 1984-1999; steel, chrome-plated; hex; replaces OEM HD 4726, 7775, 2879W, 4416, 3512, and 7506; USA; gross weight: 460 g
more …
86-369
86-369
Bolt/screw kit by Colony; for transmission top cover; fits Big Twin 1936-1955; steel, CAD (ZnNi process); oval countersunk head with slot; replaces OEM HD 2333, 2349, 2268-34, and 1523-32; USA; gross weight: 90 g
more …
86-466
86-466
Bolt/screw kit by Colony; for transmission top cover; fits Big Twin 1936-1955; steel, parkerized; oval countersunk head with slot; replaces OEM HD 2333, 2349, 2268-34, and 1523-32; USA; gross weight: 90 g
more …
86-268
86-268
Bolt/screw kit by Colony; for transmission top cover; fits Big Twin 1936-1955; steel, chrome-plated; oval countersunk head with slot; replaces OEM HD 2333, 2349, 2268-34, and 1523-32; USA; gross weight: 90 g
more …
86-366
86-366
Bolt/screw kit by Colony; for transmission top cover; fits Big Twin 1956-1964; steel, CAD (ZnNi process); oval countersunk head with slot; replaces OEM HD 34720-56, 2333, and 2349; USA; gross weight: 100 g
more …
86-256
86-256
Bolt/screw kit by Colony; for transmission top cover; fits Big Twin 1956-1964; steel, chrome-plated; oval countersunk head with slot; replaces OEM HD 34720-56, 2333, and 2349; USA; gross weight: 100 g
more …
85-347
85-347
Bolt/screw kit by Colony; for transmission top cover; fits Knucklehead 1936, Big Twin 1937-1964; steel, chrome-plated; socket head; replaces OEM HD 34720-56, 2333, and 2349; USA; gross weight: 100 g
more …
85-346
85-346
Bolt/screw kit by Colony; for transmission top cover; fits Big Twin 1965-1978; steel, chrome-plated; socket head; replaces OEM HD 1765W, 1766W, and 34720-56; USA; gross weight: 90 g
more …
86-352
86-352
Bolt/screw kit by Colony; for steel primary; fits Big Twin 4-Speed 1936-1964; steel, CAD (ZnNi process); fillister head slot / countersunk head with slot; replaces OEM HD 2265, 7021, and 1210; USA; gross weight: 70 g
more …
86-453
86-453
Bolt/screw kit by Colony; for steel primary; fits Big Twin 4-Speed 1936-1964; steel, parkerized; fillister head slot / countersunk head with slot; replaces OEM HD 2265, 7021, and 1210; USA; gross weight: 70 g
more …
86-242
86-242
Bolt/screw kit by Colony; for steel primary; fits Big Twin 4-Speed 1936-1964; steel, chrome-plated; fillister head slot / countersunk head with slot; replaces OEM HD 2265, 7021, and 1210; USA; gross weight: 70 g
more …
60-803
60-803
Oil screen by Colony; fits 45 cui/750cc 1937-1973, Big Twin Flathead 1937-1948, model K and Sportster 1954-1976; steel; with pin; replaces OEM HD 333, 411-37, 24975-37, and 24978-57; USA; gross weight: 25 g
more …
86-136
86-136
Bolt/screw kit by Colony; for steel primary; fits Big Twin 4-Speed 1956-1964; steel, CAD (ZnNi process); fillister head Phillips / countersunk head with slot; replaces OEM HD 2265, 7021, and 1211; USA; NOTE: Derby cover and Inspection cover screws are slotted OEM -Type.; gross weight: 70 g
more …
84-050
84-050
Bolt/screw kit by Colony; for steel primary; fits Big Twin 4-Speed 1936-1964; steel, chrome-plated; socket head / button head with slot; replaces OEM HD 2265, 7021, and 1210; USA; NOTE: Derby cover and Inspection cover screws are OEM -Type.; gross weight: 70 g
more …
86-134
86-134
Bolt/screw kit by Colony; for steel primary; fits Big Twin 4-Speed 1950-1955; steel, parkerized / CAD (ZnNi process); fillister head Phillips / countersunk head with slot; replaces OEM HD 2265, 7021, and 1211; USA; NOTE: Derby cover and Inspection cover screws are slotted OEM -Type.; gross weight: 71 g
more …
86-354
86-354
Bolt/screw kit by Colony; for aluminum primary; fits Big Twin 4-Speed 1965-1969; steel, CAD (ZnNi process); countersunk head with slot / countersunk head Phillips; replaces OEM HD 1354, and 2345; USA; gross weight: 100 g
more …
86-244
86-244
Bolt/screw kit by Colony; for aluminum primary; fits Big Twin 4-Speed 1965-1969; steel, chrome-plated; countersunk head with slot / countersunk head Phillips; replaces OEM HD 1354, and 2345; USA; gross weight: 100 g
more …
86-084
86-084
Bolt/screw kit »OEM Type« by Colony; for aluminum primary; fits Big Twin 4-Speed 1970-1985; steel, CAD (ZnNi process); replaces OEM HD 903, 1301, 4813, 1305, 4718, and 4741; USA; gross weight: 140 g
more …
86-083
86-083
Bolt/screw kit »OEM Type« by Colony; for aluminum primary; fits Big Twin 4-Speed 1970-1985; steel, chrome-plated; replaces OEM HD 903, 1301, 4813, 1305, 4718, and 4741; USA; gross weight: 140 g
more …
84-054
84-054
Bolt/screw kit by Colony; for aluminum primary; fits Big Twin 4-Speed 1970-1985; steel, chrome-plated; socket head; replaces OEM HD 903, 1301, 4813, 1305, 4718, and 4741; USA; gross weight: 160 g
more …
85-083
85-083
Bolt/screw kit by Colony; for aluminum primary; fits Big Twin 4-Speed 1970-1985; steel, chrome-plated; acorn hex head; replaces OEM HD 903, 1301, 4813, 1305, 4718, and 4741; USA; gross weight: 380 g
more …
84-056
84-056
Bolt/screw kit by Colony; for Primary; fits FLT 5-Speed and FXR 1980-1984; steel, chrome-plated; socket head; replaces OEM HD 4741, 4814, 4740, and 4813; USA; gross weight: 180 g
more …
86-095
86-095
Bolt/screw kit by Colony; for Primary; fits K models 1952-1956; steel, CAD (ZnNi process); oval countersunk head with slot; thread: 1/4”-40; replaces OEM HD 2345, 3728, 6218W, and 34957-52; USA; gross weight: 60 g
more …
86-137
86-137
Bolt/screw kit by Colony; for Primary; for stamped steel cover; fits Sportster XLCH 1957-1969; steel; replaces OEM HD 2268, 1369, 2345, and 7036; USA; gross weight: 69 g
more …
86-094
86-094
Bolt/screw kit by Colony; for Primary; for cast aluminum cover; fits Sportster XLH 1957-1966; steel, CAD (ZnNi process); oval countersunk head with slot; thread: 1/4”-40; replaces OEM HD 2345, 3728, 6320, and 34957-57; USA; gross weight: 64 g
more …
86-259
86-259
Bolt/screw kit by Colony; for Primary; for cast aluminum cover; fits Sportster XLH 1967-1970; steel, CAD (ZnNi process); countersunk head with slot; replaces OEM HD 2345, 2350W, and 2421W; USA; gross weight: 120 g
more …
86-141
86-141
Bolt/screw kit by Colony; for Primary; fits Sportster 1971-1976; steel, CAD (ZnNi process); fillister head Phillips; thread: 1/4”-20; replaces OEM HD 2346W, 2351W, 2420, and 2422W; USA; gross weight: 142 g
more …
84-060
84-060
Bolt/screw kit by Colony; for Primary; fits Sportster 1971-1976; steel, chrome-plated; socket head; thread: 1/4”-20; replaces OEM HD 2346W, 2351W, 2420, and 2422W; USA; gross weight: 160 g
more …
86-144
86-144
Bolt/screw kit by Colony; for Primary; fits Sportster 1977-1980; steel, CAD (ZnNi process); fillister head Phillips; replaces OEM HD 2422W, 2346W, 2420, 3728, and 63858-49; USA; gross weight: 146 g
more …
84-061
84-061
Bolt/screw kit by Colony; for Primary; fits Sportster 1977-1985; steel, chrome-plated; socket head; replaces OEM HD 3478, 3479, 3481, and 2420; USA; gross weight: 160 g
more …
82-210
82-210
Bolt/screw kit by Colony; for Primary; fits Sportster 1977-1985; steel, CAD (ZnNi process); socket head; replaces OEM HD 3478, 3479, 3481, and 2420; USA; gross weight: 160 g
more …
84-288
84-288
Bolt/screw kit by Colony; for Primary; fits Sportster 1986-1990; steel, chrome-plated; socket head; replaces OEM HD 3481, 6099, and 2423; USA; gross weight: 120 g
more …
84-289
84-289
Bolt/screw kit by Colony; for Primary; fits Sportster 1991-1993; steel, chrome-plated; socket head; replaces OEM HD 3479, 3480, 41191-74, and 6099; USA; gross weight: 170 g
more …
84-062
84-062
Bolt/screw kit by Colony; for Primary; fits Sportster 1994-2003; steel, chrome-plated; socket head; replaces OEM HD 943, 3480A, 4717A, and 41191-74; USA; gross weight: 180 g
more …
84-065
84-065
Bolt/screw kit by Colony; for Primary; fits Sportster 2004-2020; steel, chrome-plated; replaces OEM HD 943, 4820A, and 41191-74A; USA; gross weight: 278 g
more …
62-079
62-079
Adjusting screw by Colony; for primary and secondary chain lubrication; fits Big Twins 1933-early 1950 and 45”/750 cc models 1932-early 1950; steel, parkerized; length: 27.5 mm; thread: #10-32; with adjusting shims; replaces OEM HD 672-32, and 26383-32; USA; NOTE: This adjuster screw installs without counter nut.; gross weight: 15 g
more …
83-150
83-150
Screw by Colony; steel Grade 8, zinc plated; length: 5/8”; countersunk socket head; thread: 1/4”-20; wrench size: 3/16 ”; USA; gross weight: 4.4 g
more …
83-151
83-151
Screw by Colony; steel Grade 8, zinc plated; length: 3/4”; countersunk socket head; thread: 5/16”-18; wrench size: 3/16 ”; USA; gross weight: 8.2 g
more …
83-152
83-152
Screw by Colony; steel Grade 8, zinc plated; length: 7/8”; countersunk socket head; thread: 5/16”-18; wrench size: 3/16 ”; USA; gross weight: 9.4 g
more …
83-153
83-153
Screw by Colony; steel Grade 8, zinc plated; length: 1”; countersunk socket head; thread: 5/16”-18; wrench size: 3/16 ”; USA; gross weight: 10 g
more …
83-154
83-154
Screw by Colony; steel Grade 8, zinc plated; length: 1-1/4”; countersunk socket head; thread: 5/16”-18; wrench size: 3/16 ”; USA; gross weight: 12.2 g
more …
83-155
83-155
Screw by Colony; steel Grade 8, zinc plated; length: 1-1/4”; countersunk socket head; thread: 3/8”-16; wrench size: 3/16 ”; USA; gross weight: 18 g
more …
83-156
83-156
Screw by Colony; steel Grade 8, zinc plated; length: 1-1/2”; countersunk socket head; thread: 3/8”-16; wrench size: 3/16 ”; USA; gross weight: 20 g
more …
83-157
83-157
Screw by Colony; steel Grade 8, zinc plated; length: 1-1/4”; countersunk socket head; thread: 7/16”-14; wrench size: 3/16 ”; USA; gross weight: 20 g
more …
83-158
83-158
Screw by Colony; steel Grade 8, zinc plated; length: 1-3/4”; countersunk socket head; thread: 7/16”-14; wrench size: 3/16 ”; USA; gross weight: 30 g
more …
85-291
85-291
Screw by Colony; steel, chrome-plated; oval countersunk head with slot; thread: #12-24; length: 1/2 ” (13 mm); replaces OEM HD 2268W; USA; gross weight: 1 g
more …