We use cookies for analytics, advertising and to improve our site. To find out more see our privacy policy.



>

Shop

>

Fenders

>

Fender Tips, Trims and Ornaments



Fender Tips, Trims and Ornaments

Cock-A-Snoot Mascot

Cock-A-Snoot Mascot

These little mascots were popular accessories in the Fifties among bikers as well as in the Hot Rod scene. The Factory offered them in the official accessory catalog where you could choose from lions, jumping horses or greyhounds, i.e. rather nice and innocent motifs. However, there are nastier versions, too. One of those is the "Cock-a-snoot" devil, which is a little Lucifer which thumbs his nose at someone. Needles to say, this was the preferred mascot on Hot Rod bumpers and Bobber fenders, because it perfectly demonstrated the owners feelings about his competitor and his mill, especially after he had just outraced him. The mascot offered here is a detailed and accurate reproduction after a pattern originating from these glorious days. Made from pewter and highly polished, with 3/8”-16 mounting thread.

The Cyclery Mud Flaps

The Cyclery Mud Flaps

Exact duplicates of the leather mud flaps as used on Springer fork fenders since 1926. Leave them as plain as they come, or decorate them with spots or reflectors.

Old Style Mud Flaps

Old Style Mud Flaps

A classic accessory since the 1920’s for front fenders. These rubber mud flaps with rivets fit all models with Springer or Wide Glide forks and stock or similar fenders.

Eagle Fender Tips 1942-1947

Eagle Fender Tips 1942-1947

The original parts are mostly missing or in very bad condition. These high quality reproductions of the Harley fender tips will solve a big problem during serious restoration projects.

Fender Tips 1948

Fender Tips 1948

The original parts are mostly missing or in very bad condition. These high quality reproductions of the Harley fender tips will solve a big problem during serious restoration projects.
Designed for the 1948 Springer fork models, but offered as accessories through 1957 for all Big Twins.

Fender Tips 1949-1956

Fender Tips 1949-1956

The original parts are mostly missing or in very bad condition. These high quality reproductions of the Harley fender tips will solve a big problem during serious restoration projects.

Fender Tips 1957-1966

Fender Tips 1957-1966

The original parts are mostly missing or in very bad condition. These high quality reproductions of the Harley fender tips will solve a big problem during serious restoration projects.

Chevron Fender Tips 1967-1972

Chevron Fender Tips 1967-1972

The original parts are mostly missing or in very bad condition. These high quality reproductions of the Harley fender tips will solve a big problem during serious restoration projects.

Fender Tips 1200 and 80

Fender Tips 1200 and 80

Chrome die cast fender tips with embossed ”1200” or ”80” design as used on E-Glide models from 1967–early 1982. Use as stock replacement or as retrofit parts. Front tips will fit 1949–up Glide front fenders, rear tips will fit only swing arm fenders 1958–up.

Trim Strip Sets for Front Fenders

Trim Strip Sets for Front Fenders

Trim strips for the front fender which fit the fender tips of the respective year group. Sold as sets of 2.

T-Bolt for Trim Strip Sets

T-Bolt for Trim Strip Sets

Fender Side Trims 1939-1948

Fender Side Trims 1939-1948

Polished stainless steel fender side trims that fit all stock Harley fenders from 1939–1948 as well as our reproduction fenders of the respective year group. Another important detail for a quality restoration.

Replacement Clips for Fender Side Trims 1939-1948

Replacement Clips for Fender Side Trims 1939-1948

Front strips require 12 clips, rear strips require 14 clips.

Sergeant Stripes Fender Trims

Sergeant Stripes Fender Trims

These trims were factory equipment on all 1949-1950 Panheads and Flatheads but will fit later model rear fenders as well.

National Cycle Fender Tips for Rear Fenders

National Cycle Fender Tips for Rear Fenders

It will be hard to find an accessory that will add so much to your bike at such a reasonable cost. This original design from the 1940s has been painstakingly refined for today‘s bikes. These cast fender tips have a jewel quality chrome finish. Mechanical application with hidden screw mount. All fasteners and template provided.

Kuryakyn Fender Tips

Kuryakyn Fender Tips

The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide and many CVO Screamin' Eagle Touring models look sharp, nevertheless could use a little flash. The classy fender tips by Kuryakyn are the perfect chrome complement to these clean fenders.

Front Fender Trims Lower

Front Fender Trims Lower

Lower fender trims for all FL style front fenders from 1949 to present.

Mounting Screws for Lower Fender Trims

Mounting Screws for Lower Fender Trims

Fender Trim Rails for 45cui/750cc and 4-Speed Big Twins

Fender Trim Rails for 45cui/750cc and 4-Speed Big Twins

Chrome-plated, one-piece front fender fender trim rail with four mounting elements. The fender must be drilled for installation.

Fender Trim Rails for Softail and Touring

Fender Trim Rails for Softail and Touring

A stylish re-creation of a popular Hydra Glide accessory from the glory 1950’s for today’s Softail and Touring models. The ornate, twin-tube design sweeps along the fender lines, and the sparkling chrome makes these products a hit for all Heritage and Dresser owners.

Aristocrat I Fender Trim Rails

Aristocrat I Fender Trim Rails

Chrome-plated trim rails for Dresser fenders. Look great on Full Dresser models with their classic Duo Glide appearance.

Cabbage Cutters

Cabbage Cutters

Period photographs of the 1940s and 1950s often show bikes dressed-up with flamboyant fender bumpers, soon nicknamed "cabbage cutters" for obvious reasons. The W&W selection includes precise reproductions of the period parts for classic bikes as well as updated versions to fit modern Touring and Heritage Softail models.

These polished stainless steel trim pieces have been formed to match the curvature of large FL fenders. Each kit includes two long and two short trim pieces with all necessary T-bolts and hardware. When in place, these trim pieces provide a great-looking alternative to a complete luggage rack, while delivering a distinctive, classic style.

Cannonball Nation Bilt Fender Trim Rails

Cannonball Nation Bilt Fender Trim Rails

Very nice reproduction of the Nation Bilt aftermarket fender top trims which were very popular during the 40’s and 50’s. Not only do they look good but they’re also very useful to tie down your sleeping bag, rain suit etc. Will fit stock rear fenders of the era or similar. The mounting balls are made from chromed steel, the rails from brushed stainless steel.

Universal Fender Trim Rails

Universal Fender Trim Rails

Nice reproduction of a period accessory of the Golden Fourties and Fifties. Universal application on most front and rear fenders. All monting small parts are included.

Eagle Head Fender Ornaments

Eagle Head Fender Ornaments

Chrome-plated eagle head fender ornament that fits most front fenders. Available completely chromed or chromed with lighted eyes. Each ornament comes with mounting gasket and screws.

Emblems for Harley Fenders

Emblems for Harley Fenders

Reproductions of the original front fender emblems.

Secure your metal fender trims and emblems with these clip-on speed nuts.

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com