Hot Stuff in the Shop

  • Faber Cycle Handlebars Standard 1919-1924 for IOE Models

    Faber Cycle Handlebars Standard 1919-1924 for IOE Models

    Excellent reproduction of the factory handlebars as used on 1919-1924 models. Correct for models of this year group, however they fit all IOE and V models 1915-1934. more

  • Kickstarter Kits for Sportster

    Kickstarter Kits for Sportster

    Complete kits with all necessary parts to convert or restore Sportster models from 1954-79. No more trouble to collect all the small parts. The kits for Kick- and E-Start include ... more

  • Galco SB2 Sport Belts

    Galco SB2 Sport Belts

    You probably just found the last leather belt you will ever buy because Galco leather belts will outlast the usual department store stuff many times over. For good reason many a ... more

  • Bates Sportster Style Gas Tanks

    Bates Sportster Style Gas Tanks

    An ever popular way to customize rigid frame and 4-speed Big Twins is to install Sportster gas tanks. The hair in the soup, however, was that the original rear gas tank mounts had ... more

  • The Cyclery Generators Type 32TC

    The Cyclery Generators Type 32TC

    The classic look of the 32E generator and the more dependable technology of the later two brush generator - you can have the best of both worlds with these The Cyclery 32TC ... more

  • Rockmount Stonewashed Denim Western Shirts

    Rockmount Stonewashed Denim Western Shirts

    Everyone needs a denim shirt and this 100% cotton, stonewashed classic gets better with age. Features the iconic sawtooth pockets and diamond snaps. Relaxed fit, machine washable. more

  • Bates Kill Bill Battery Switches

    Bates Kill Bill Battery Switches

    Terminal and thumb screw assembly which can be mounted on any suitable place on the motorcycle. It connects the battery’s ground (negative) terminal and cable with the ... more

  • Red Wing 3375 6” Moc Boots Ladies

    Red Wing 3375 6” Moc Boots Ladies

    Patterned after Red Wing’s iconic work boot – the 875, the 6-inch Moc is completely rebuilt for women. The 3375 is lightweight, comfortable and tough, and features Goodyear welt ... more

  • Regatta Garage Risers

    Regatta Garage Risers

    Cute risers that kick inward about 7/32” from the riser-bolt centerline to allow for clamping of narrow-center handlebars. more

  • Clover Lapping Compound

    Clover Lapping Compound

    The original Clover brand lapping compound used by H-D enthusiasts for years. Use for all our lapping tools and for lapping-in valves. Course 220 grit for roughin’ in and Fine 320 ... more

  • Brake Drum Cooling Rings

    Brake Drum Cooling Rings

    A literally cool accessory for the front brake drum of your Hydra-Glide, Duo-Glide or Electra-Glide. This cooling ring simply clamps on the outside and keeps temperatures down on ... more

  • Mooneyes Cole Foster Headlight

    Mooneyes Cole Foster Headlight

    Cole Foster of Salinas Boyz Custom designed this headlight for Mooneyes. It is made from the same high quality aluminum as the Moon oil tanks. The cone body has a smooth shape ... more

  • The Cyclery Screwdrivers for Handlebar End Plugs

    The Cyclery Screwdrivers for Handlebar End Plugs

    This is the tool you always wished to have when it’s time to loosen those frozen handlebar end screws. We all know that even the largest screwdriver in the average toolbox simply ... more

  • Faber Cycle Handlebars Standard 1915-1918 for IOE Models

    Faber Cycle Handlebars Standard 1915-1918 for IOE Models

    Excellent reproduction of the factory handlebars as used on 1915-1918 models. Correct for models of this year group, however they fit all IOE and V models 1915-1934. more

  • PanAm Tool Bags

    PanAm Tool Bags

    This is very likely the last tool bag you will buy. Made from 3.5 mm cowhide throughout, which is even doubled in critical spots. Two wrap-around straps and two mounting straps ... more

  • Easyriders Carburetor Support Brackets BT OHV 1948-1984

    Easyriders Carburetor Support Brackets BT OHV 1948-1984

    Carb support bracket which mounts to the upper frame motor mount. It is adjustable by length (41-56 mm), height (+/- 6 mm) and it can be tilted, which makes it suitable for most ... more

  • Wrecking Crew Longsleeves

    Wrecking Crew Longsleeves

    Timeless, cool, and comfortable design with raglan sleeves, made from light cotton. more

  • Fork Electric Timer Covers

    Fork Electric Timer Covers

    These neat timer covers sport a truly sparking design. more

  • Medicine Bags

    Medicine Bags

    Get your mojo working from it or use it to carry your extra cash under the shirt. This neat deerskin medicine bag is very soft and comfortable to wear. more

  • Jericho Trumpets Mufflers

    Jericho Trumpets Mufflers

    Well, yes, at first glance the Jericho Trumpets look like mufflers, but if you install them `as delivered´ they don’t muffle anything, so make sure you are on a race track or in ... more

  • Rockmount Flannel Shirts

    Rockmount Flannel Shirts

    When the leaves are falling, or the first snowflakes are settling on your gas tank, a plaid Rockmount shirt is just what the doctor ordered. But in spring or summer too, you’ll ... more

  • Chopper Dave’s Alternator Covers

    Chopper Dave’s Alternator Covers

    A design by Randy Smith, founder of Custom Cycle Engineering, who created it back in the 1970s. He allowed Chopper Dave to use his product as a pattern for these alternator covers ... more

  • W&W Go West! Tin Mugs

    W&W Go West! Tin Mugs

    After the ride into that perfect sunset you just can't drink your favourite brew from a paper cup. These Go West! enameled tin mugs simply add style, improve flavour and won't ... more

  • Lejonkulan Duke Saddlebag

    Lejonkulan Duke Saddlebag

    The Duke saddlebag is slightly smaller than the Bamse series but still large enough for your weekend trip. Four straps on the lid help to attach a sleeping bag, tent etc. A large ... more