We use cookies for analytics, advertising and to improve our site. To find out more see our privacy policy.



>

Shop

>

Workshop, Garage and Tools

>

>

Screwdrivers



Screwdrivers

Bahco Magnetizer / Demagnetizer

Bahco Magnetizer / Demagnetizer

Sometimes magnetism is helpful, sometimes it’s annoying. This little helper magnetizes or demagnetizes screwdriver blades, tweezers, scissors and other tools made of steel. Easy use. With hanging hole.

W&W Screwdriver

W&W Screwdriver

A little helper to complete your own toolkit or a great gift for buddies who always want to borrow your screwdrivers. The double tip blade can be switched for slotted or Phillips screws.

The Cyclery Flat Tip Screwdriver Set

The Cyclery Flat Tip Screwdriver Set

Classic Harleys well into the 1960s feature lots of slotted screws on engine, transmisison, primary etc. which you don´t want to tighten or loosen with a cheap screwdriver. It will mar the slots in no time and make you look a poor mechanic. This special edition The Cyclery screwdriver set includes the exact size screwdriver for most slotted screws you find on older H-D models. They feature hollow ground tips to perfectly fit the respective slot, avoiding damages and keeping your expensive hardware in good shape. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these screwdrivers provide that great wood handle feel that only gets better with time. Classy tools for classic bikes - an ideal combination.
The 6-piece set comprises the following blade sizes:
#1 = 1.0 x 4.7 x 160 mm, #2 = 1.0 x 6.0 x 183 mm, #3 = 1.2 x 6.0 x 205 mm, #4 = 1.3 x 7.0 x 209 mm, #5 = 1.4 x 9.3 x 168 mm, #6 = 1.7 x 9.3 x 272 mm,

The Cyclery Screwdrivers for Handlebar End Plugs

The Cyclery Screwdrivers for Handlebar End Plugs

This is the tool you always wished to have when it’s time to loosen those frozen handlebar end screws. We all know that even the largest screwdriver in the average toolbox simply doesn’t do the job, because the slots in the end plugs are way too big and you will inevitably ruin them in no time. The Cyclery offers you the right stuff: hand forged and finished from tool steel with a substantial ironwood handle. The blade tip is hollow ground and 3/16” thick so it bites into the screw slot for a tight, non-slip fit. The version with 1/2” wide tip is intended for handlebars with hard plastic grips installed. Rubber grips can use the larger 5/8” type screwdriver. The shank has a 1/2” square section, which allows for support with an open end wrench. Classy tools for classic bikes.

Grace USA Original Gun Care Flat Tip Screwdriver Set

Grace USA Original Gun Care Flat Tip Screwdriver Set

Tightening slotted screws with your average K-Mart screwdriver mars the slots in no time and makes you look a poor mechanic. The Grace USA Gun Care Screwdrivers are custom hollow ground to perfectly fit the respective slotted screws, avoiding damages. Edward C. Grace, founder of Grace USA, also owned a gunsmith shop and was determined to create a screwdriver that would be a perfectly functional tool for this job. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time. Classy tools for classic bikes - an ideal combination.
The 8-piece set comprises the following blade sizes:
N2 = 0.8 x 7.5 x 51 mm, G2 = 0.7 x 3 x 53.5 mm, G3 = 0.8 x 4 x 78 mm, H2 = 0.8 x 5 x 56 mm, H3 = 1 x 5 x 81 mm, H4 = 1.2 x 6 x 99 mm, N3 = 1 x 7.5 x 80 mm, N4 = 1.3 x 7.5 x 98 mm,

Grace USA Flat Tip Screwdriver Set

Grace USA Flat Tip Screwdriver Set

This compilation flat tip screwdrvers is designed specifically to serve the needs of both professional and hobbyist mechanics. Precision made for a snug fit between the driver and fastener which minimizes the potential for damage to the screw head when torque is applied. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 6-piece set comprises the following blade sizes:
SS3 = 0.8 x 4 x 80 mm, SS4 = 1 x 5.8 x 81 mm, SS5 = 1.2 x 6 x 150 mm, N3 = 1.3 x 7.5 x 80 mm, SS6 = 1.2 x 7.5 x 132 mm, SS7 = 1.3 x 9 x 182 mm,

Grace USA Phillips Screwdriver Set

Grace USA Phillips Screwdriver Set

Phillips head screwdriver set which is designed specifically to serve the needs of both professional and hobbyist mechanics. The chromium-vanadium steel alloy blades feature a black oxide-finish and are precision made for a snug fit between the driver and fastener which minimizes the potential for damage to the screw head when torque is applied. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 5-piece set comprises the following blade sizes:
P0 = size 0, blade length 77 mm, P1 = size 1, blade length 80.5 mm, P2 = size 2, blade length 44 mm, P2 = size 2, blade length 79 mm, P3 = size 3, blade length 141 mm,

Grace USA Flat Tip and Phillips Screwdriver Set

Grace USA Flat Tip and Phillips Screwdriver Set

A set of Flat Tip and Phillips screwdrivers designed to serve the needs of the home do-it-yourself mechanic who is looking for a quality set of screwdrivers that will cover a broad range of needs. It consists of three Phillips and three matching slotted tips. Each screwdriver is constructed of USA 8650 Chromium-Vanadium steel alloy blades, precision made for a snug fit between the driver and fastener that minimizes the potential for damage to the screw head when torque is applied. The handles are turned from Maine hardwood and protected with a nicely stained finish, topped off with a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 6-piece set comprises the following blade sizes:
P0 = size 0, blade length 77 mm, P1 = size 1, blade length 80.5 mm, P2 = size 2, blade length 79 mm, G3 = 1 x 4, blade length 80 mm, H3 = 1 x 5.5, blade length 81 mm, N3 = 1.3 x 7.5, blade length 80 mm,

Grace USA Flat Tip and Phillips Micro Screwdriver Set

Grace USA Flat Tip and Phillips Micro Screwdriver Set

When the jobs become a bit more delicate than usual, e.g. speedometer repair, ignition switch servicing, or similar, this set of Micro Flat Tip and Phillips screwdrivers is axactly what you need. It comprises three Phillips and three slotted tips. Each size is constructed of a 67 mm long, 8650 Chromium-Vanadium steel alloy blade and a Maine hardwood handle with a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 6-piece set comprises the following blade sizes:
P0000 = Phillips size 0000, , P000 = Phillips size 000, P00 = Phillips size 00, ST 1/16”, ST 5/64”, ST 3/32”,

Grace USA Torx Screwdriver Set

Grace USA Torx Screwdriver Set

Torx screwdriver set which is designed specifically to serve the needs of both professional and hobbyist mechanics. The chromium-vanadium steel alloy blades feature a black oxide-finish and are precision made for a snug fit between the driver and fastener which minimizes the potential for damage to the screw head when torque is applied. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 11-piece set comprises the following sizes:
T5, blade length 77 mm, T6, blade length 77 mm, T7, blade length 77 mm, T8, blade length 77 mm, T9, blade length 77 mm, T10, blade length 77 mm, T15, blade length 78 mm, T20, blade length 78 mm, T25, blade length 87.5 mm, T27, blade length 89.5 mm, T30, blade length 88 mm,

Grace USA Ball-End Hex Screwdriver Set

Grace USA Ball-End Hex Screwdriver Set

Ball-end hex head screwdriver set which is designed specifically to serve the needs of both professional and hobbyist mechanics. The chromium-vanadium steel alloy blades feature a black oxide-finish and are precision made for a snug fit between the driver and fastener which minimizes the potential for damage to the screw head when torque is applied. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickle plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 9-piece set comprises the following sizes:
1/16", blade length 76.5 mm, 5/64", blade length 76.5 mm, 3/32", blade length 77 mm, 7/64", blade length 76.5 mm, 1/8", blade length 79.5 mm, 9/64", blade length 78 mm, 5/32", blade length 78 mm, 3/16", blade length 83.5 mm, 3.5 mm, blade length 78 mm,

Bahco Pistol Handle Bit Ratchet Screwdrivers

Bahco Pistol Handle Bit Ratchet Screwdrivers

Ratchet screwdriver for 1/4“ bits by Bahco, with several hidden features. In addition to the 3-component handle for comfortable handling and efficient use of force, this ratchet screwdriver is equipped with a knurled steel blade and a stainless steel blade tip with a magnet. A ratchet mechanism with 48 teeth allows smooth working and minimal rotation of the tool to the next ratchet tooth. One-handed switching between three different positions is possible without problems.

A bit magazine with six different bits is well hidden in the handle:
PH1, PH2, PZ1, PZ2, Flat tip 4.5mm, Flat tip 5.5mm,
By operating a knob integrated in the handle, it can be brought into an angled position to generate more torque if necessary.

Bahco LED Bit Ratchet Screwdrivers

Bahco LED Bit Ratchet Screwdrivers

Ratchet screwdriver for 1/4“ bits by Bahco, with several hidden features. In addition to the 3-component handle for comfortable handling and efficient use of force, this ratchet screwdriver is equipped with a knurled steel blade and a stainless steel blade tip with a magnet. A ratchet mechanism with 48 teeth allows smooth working and minimal rotation of the tool to the next ratchet tooth. One-handed switching between three different positions is possible without problems.

A bit magazine with six different bits is well hidden in the handle:
PH1, PH2, PZ1, PZ2, Flat tip 4.5mm, Flat tip 5.5mm,
In addition, this tool is equipped with two LED lamps attached to the lower end of the handle to bring light into poorly lit working areas.

Bahco Bits Sets

Bahco Bits Sets

This bit set by Bahco contains 29 bits with 1/4" drive for slotted, cross, pozidriv, torx and hexagon socket screws. Also included in the kit is a magnetic bit holder with quick lock and lock-in system as well as a plug-in adapter for the use of nuts with 1/4" drive. Manufactured from a high performance alloy steel, pearl-blasted and treated with oil to protect against corrosion. All parts are safely stored in a compact plastic box with see-through window and belt clip.
The kit contains the following bits:
1x SL 4.5mm, 1x 5.5mm, 1x PH1, 3x PH2, 1x PH3, 2x PH2G, 1x PZ 1, 3x PZ2, 1x PZ3, 1x T10, 3x T15, 3x T20, 2x T25, 1x T27, 1x T30, 1x H3, 1x H4, 1x H5, 1x H6,

Bahco Flat Tip Screwdrivers Short

Bahco Flat Tip Screwdrivers Short

Screwdrivers with comfortable, 2-component handle made with over 75% rubber and integrated hanging hole. Maximum grip thanks to the vertical anti-slip grooves in the handle. Easy size and screw type identification from the markings on the handle. High performance alloy steel shaft, chrome plated and entirely hardened with black tip.

Bahco Phillips Screwdrivers Short

Bahco Phillips Screwdrivers Short

Screwdrivers with comfortable, 2-component handle made with over 75% rubber and integrated hanging hole. Maximum grip thanks to the vertical anti-slip grooves in the handle. Easy size and screw type identification from the markings on the handle. High performance alloy steel shaft, chrome plated and entirely hardened with black tip.

Bahco 6 Impact Head Flat Tip and Phillips Screwdriver Set

Bahco 6 Impact Head Flat Tip and Phillips Screwdriver Set

Impact screwdrivers with 3 component handle by Bahco. Easy to distinguish depending on the blade by colour coding at the end of the handle. The blade with hardened tip runs through the entire handle to a metal cap attached to the end of the handle to withstand precise and powerful blows without damaging the tool. The force is transmitted directly and without loss to the workpiece, which significantly increases efficiency, e.g. when loosening tight screws. The blade itself is made of a high performance alloy steel, hardened and chrome-plated to ensure durability and resistance to corrosion. For additional torque support, a hexagonal shank for spanners is fitted below the handle.
The 6-piece set comprises the following blade sizes:
PH 1 = size 1, blade length 100 mm, PH 2 = size 2, blade length 125 mm, flat tip 3.5 x 0.6 mm, blade length 75 mm, flat tip 4.5 x 0.8 mm, blade length 100 mm, flat tip 5.5 x 1.0 mm, blade length 125 mm, flat tip 6.5 x 1.2 mm, blade lenght 125 mm,

Bahco 6 Impact Head Flat Tip and Pozidriv Screwdriver Set

Bahco 6 Impact Head Flat Tip and Pozidriv Screwdriver Set

Impact screwdrivers with 3 component handle by Bahco. Easy to distinguish depending on the blade by colour coding at the end of the handle. The blade with hardened tip runs through the entire handle to a metal cap attached to the end of the handle to withstand precise and powerful blows without damaging the tool. The force is transmitted directly and without loss to the workpiece, which significantly increases efficiency, e.g. when loosening tight screws. The blade itself is made of a high performance alloy steel, hardened and chrome-plated to ensure durability and resistance to corrosion. For additional torque support, a hexagonal shank for spanners is fitted below the handle.
The 6-piece set comprises the following blade sizes:
PZ 1 = size 1, blade length 100 mm, PZ 2 = size 2, blade length 125 mm, flat tip 3.5 x 0.6 mm, blade length 75 mm, flat tip 4.5 x 0.8 mm, blade length 100 mm, flat tip 5.5 x 1.0 mm, blade length 125 mm, flat tip 6.5 x 1.2 mm, blade lenght 125 mm,

Bahco Impact Head Flat Tip Screwdrivers

Bahco Impact Head Flat Tip Screwdrivers

Impact screwdrivers with 3 component handle by Bahco. Easy to distinguish depending on the blade by colour coding at the end of the handle. The blade with hardened tip runs through the entire handle to a metal cap attached to the end of the handle to withstand precise and powerful blows without damaging the tool. The force is transmitted directly and without loss to the workpiece, which significantly increases efficiency, e.g. when loosening tight screws. The blade itself is made of a high performance alloy steel, hardened and chrome-plated to ensure durability and resistance to corrosion. For additional torque support, a hexagonal shank for spanners is fitted below the handle.

Bahco Impact Head Phillips Screwdrivers

Bahco Impact Head Phillips Screwdrivers

Impact screwdrivers with 3 component handle by Bahco. Easy to distinguish depending on the blade by colour coding at the end of the handle. The blade with hardened tip runs through the entire handle to a metal cap attached to the end of the handle to withstand precise and powerful blows without damaging the tool. The force is transmitted directly and without loss to the workpiece, which significantly increases efficiency, e.g. when loosening tight screws. The blade itself is made of a high performance alloy steel, hardened and chrome-plated to ensure durability and resistance to corrosion. For additional torque support, a hexagonal shank for spanners is fitted below the handle.

Bahco Impact Head Pozidriv Screwdrivers

Bahco Impact Head Pozidriv Screwdrivers

Impact screwdrivers with 3 component handle by Bahco. Easy to distinguish depending on the blade by colour coding at the end of the handle. The blade with hardened tip runs through the entire handle to a metal cap attached to the end of the handle to withstand precise and powerful blows without damaging the tool. The force is transmitted directly and without loss to the workpiece, which significantly increases efficiency, e.g. when loosening tight screws. The blade itself is made of a high performance alloy steel, hardened and chrome-plated to ensure durability and resistance to corrosion. For additional torque support, a hexagonal shank for spanners is fitted below the handle.

Bahco Impact Head Torx Screwdrivers

Bahco Impact Head Torx Screwdrivers

Impact screwdrivers with 3 component handle by Bahco. Easy to distinguish depending on the blade by colour coding at the end of the handle. The blade with hardened tip runs through the entire handle to a metal cap attached to the end of the handle to withstand precise and powerful blows without damaging the tool. The force is transmitted directly and without loss to the workpiece, which significantly increases efficiency, e.g. when loosening tight screws. The blade itself is made of a high performance alloy steel, hardened and chrome-plated to ensure durability and resistance to corrosion. For additional torque support, a hexagonal shank for spanners is fitted below the handle.

Bahco Impact Driver

Bahco Impact Driver

After decades of service some screws or bolts simply refuse to cooperate with regular tools, especially after they have been abused with improper tools in the past. A good impact driver enormously helps to convince stubborn hardware. The Bahco kit comprises everything you need to get those jobs done:
impact driver with 1/2” square drive (left & right turn), 4 slotted bits, size 5 mm, 6 mm, 8 mm, 10 mm, 4 Phillips bits, size 1 mm, 2 mm, 3 mm, 4 mm, 4 hex bits, size 4 mm, 5 mm, 6 mm, 8 mm, 1 bit holding adapter, 1 Adapter, 5/16" hex to 3/8" square drive, 1 plastic storage box,

Bahco 5 Flat Tip and Phillips Screwdriver Set

Bahco 5 Flat Tip and Phillips Screwdriver Set

Screwdrivers with comfortable, 2-component handle made with over 75% rubber and integrated hanging hole. Maximum grip thanks to the vertical anti-slip grooves in the handle. Easy size and screw type identification from the markings on the handle. High performance alloy steel shaft, chrome plated and entirely hardened with black tip.
The 5-piece set comprises the following blade sizes:
PH 1 = size 1, blade length 100 mm, PH 2 = size 2, blade length 125 mm, flat tip 3.0 x 0.75 mm, blade length 75 mm, flat tip 4.0 x 0.8 mm, blade length 100 mm, flat tip 5.5 x 1.0 mm, blade length 125 mm,

Bahco 8 Flat Tip and Phillips Screwdriver Set

Bahco 8 Flat Tip and Phillips Screwdriver Set

Screwdrivers with comfortable, 2-component handle made with over 75% rubber and integrated hanging hole. Maximum grip thanks to the vertical anti-slip grooves in the handle. Easy size and screw type identification from the markings on the handle. High performance alloy steel shaft, chrome plated and entirely hardened with black tip.
The 8-piece set comprises the following blade sizes:
PH 1 = size 1, blade length 100 mm, PH 2 = size 2, blade length 125 mm, PH 2 = size 2, blade length 25 mm, flat tip 4.0 x 0.8 mm, blade length 100 mm, flat tip 5.5 x 1.0 mm, blade length 125 mm, flat tip 6.5 x 1.2 mm, blade length 150 mm, flat tip 8.0 x 1.6 mm, blade length 175 mm, flat tip 6.0 x 1.2 mm, blade length 25 mm,

Bahco Flat Tip Screwdrivers

Bahco Flat Tip Screwdrivers

Screwdrivers with comfortable, 2-component handle made with over 75% rubber and integrated hanging hole. Maximum grip thanks to the vertical anti-slip grooves in the handle. Easy size and screw type identification from the markings on the handle. High performance alloy steel shaft, chrome plated and entirely hardened with black tip.

Bahco Phillips Screwdrivers

Bahco Phillips Screwdrivers

Screwdrivers with comfortable, 2-component handle made with over 75% rubber and integrated hanging hole. Maximum grip thanks to the vertical anti-slip grooves in the handle. Easy size and screw type identification from the markings on the handle. High performance alloy steel shaft, chrome plated and entirely hardened with black tip.

Felo smart Screwdriver

Felo smart Screwdriver

Indispensable for any tool roll. Smart two component handle for longitudinal and T-style use and a matching Phillips/flat tip blade PH2 - 6.0x1.0. This combination proved to be the most useful for roadside repairs.

Felo Ergonic Screwdriver Set

Felo Ergonic Screwdriver Set

Ergonic screwdrivers by Felo are the first of its kind with handles that adapt to the user's hand. Cells of flexible plastic which are incorporated into the grip yield a perfect adaption to the human hand. This anti-roll handle design significantly increases torque and at the same time reduces hand effort. The blades are manufactured from chrome-molybdenum-vanadium steel, feature hardened tips for a precision fit and a full length, impact proof handle core. Hexagon bolsters and a hanging hole for easy storage or inserting a lever complete the equipment. 6-piece set with four flat tip and two Phillips screwdrivers.
Phillips: PH 1, PH 2, Flat Tip: 3.0 x 80, 4.0 x 75, 5.5 x 100, 6.5 x 125,

Bondhus Screwdrivers Ball-End Torx

Bondhus Screwdrivers Ball-End Torx

A set of Bondhus ball-end Torx screwdrivers which allow for fast removing/installing of Torx screws. The ball-shaped end permits the use even in hard-to-reach areas up to an angle of 25°.