Various

Use this spanner to securely tighten or loosen the special ring nut that comes with your round type ignition switch. A great alternative to pliers which will inevitably scratch your nut.

Even the coolest chop will see some high temps every once in a while. For example, a worn out bushing in your engine needs to be replaced. To get it out without damage to the aluminium cases, they need to be heated to just the right temperature. If you just point your blowtorch in a general direction and hope for the best, you risk warping or cracking your cases. This no-touch infra red thermometer by Bahco is also just the tool to have around when you want to check the engine temperature after a long idle, or you might want to check the temps of your headpipes, analyse your exhaust gas temperatures in relation to the jets in your carb, check oil temperatures. You might even check your body temperature or the temperature of your after work beer. 
Fast, precision measurement, easy-to-read LCD display (with light option). For maximum pointing accuracy, switch on the built in laser pointer (make your own holster for wearing it with max style). Measurement range is from -50°C to 550°C or, switched to Fahrenheit, -58°F to 1020°F, accuracy is ±1,5°. For medical purposes a mite on the inaccurate side, for everything happening in and on Milwaukee tractors just what the doctor ordered.
A 9V 6LR61 battery (not included) is needed for operation.

A scribe is essential in every tool assortment. This version by Bahco has a straight and a 70° angled end. Made of Ø 4 mm chrome vanadium steel which makes them strong enough for all common jobs.

Who doesn't know these moments. There is simply no clear field of vision of the screw of desire. This articulated mirror of Bahco is a very useful tool when it comes to working on inaccessible places on the motorcycle. This saves you a lot of trouble and makes such blind screwing manoeuvres child's play.
The mirror head can be swivelled on all sides and can be fixed in any position with a screw. The two-part telescopic shaft can extend the mirror from 290mm to 450mm. The mirror housing and the steel shaft are stainless and an orange rubber handle ensure good handling.

Sometimes magnetism is helpful, sometimes it’s annoying. This little helper magnetizes or demagnetizes screwdriver blades, tweezers, scissors and other tools made of steel. Easy use. With hanging hole.

Oh, sh…! A split second of inattention and that accursed piston pin snap ring disappears in the dark downs of the crankcase. In such a mishap, Bahco's flexible magnet lifters are a blessing. With the 2-component handle they can be securely operated.

Anyone who has ever been to the emergency room knows this imaginative tool. It is used to clamp swabs or vessels in order to treat wounds. And you can use them on your bike in exactly the same way: to clamp fuel or oil hoses. Apply it, squeeze it, and you're done. Loosen by slightly shifting the eyelets sideways. Also suitable as a third hand for nasty work, for insertig screws into deeper holes, etc.

These single-handedly operated center punches are released by simple pressure. The center punch can no longer bounce from the hammer blow. A wide knurling provides a good grip when applying, the necessary pressure can be adjusted steplessly via the knurled cap.

Useful stainless steel tray with protective coating on magnet and embossed The Cyclery logo. Can be attached in any position on metal surfaces and holds metallic small parts and tools.

Small tools for a thousand uses. Hold keys, gaskets, washers, clips, etc. while placing them in tight and dark spots. The fiber grip pieces and ridged tips ensure good control. Guaranteed to be used frequently, once you have them in your toolbox.

This pin punch set is made with utmost precision from high quality CDA 360 hex brass rod extruded in a mill in the USA and beautifully polished. They are machine turned and designed for critical work were non-marring and non-sparking are of importance. Carefully made to drive pins or to gently move steel objects.
The 8-piece set comprises the following punches:
punch 1/16”, punch 3/32”, punch 1/8”, punch 5/32”, punch 3/16”, punch 7/32”, punch 1/4”, punch 5/16”,

For meticulous work on detailed projects. These punches are made from high carbon molybendenum tool steel and properly heat treated with tempered striking end. They are also centerless ground for complete accuracy and we have incorporated a reverse taper from tip of punch to help prevent punch from sticking in the work piece. The punches are manufactured from hex stock steel vs. round which helps stabilize punch from rolling away from user.
The 7-piece set comprises the following punches:
center-punch 3.5 mm, length 107 mm, tapered punch 1/16”, length 114.5 mm, punch 1/16”, length 108.5 mm, punch 5/64”, length 114.5 mm, punch 3/32”, length 121 mm, punch 1/8”, length 127 mm, punch 5/32”, length 134 mm,

Tools for a thousand uses which will make you soon ask yourself how you had survived before you added them to your toolbox. Clean grease and dirt from dark corners of your engine, tranny, wheel hubs etc., pull lock rings from shafts, catch that lockwasher that just dropped between cooling fins, or you name it. This is a finely crafted set, made with chromium-vanadium 8650 alloy steel. Each hook and pick is of 1/8” diameter, 78 mm long and carefully pressed into the hardwood handle. The handles are hot stamped with the appropriate size and angle of the hook and pick.
The 6-piece set comprises the following blades:straight scribe, 30° bent pick, 90° bent pick, double bend pick, 180° loop pick, 180° hook pick,

A must-have for every workshop. Set comprises one awl and three different hooks/picks. Each with a comfort handhold.

Mandatory on race bikes but a good idea on street bikes, too: securing bolts, drain plugs, axle nuts, etc with safety wire. Especially those which you don’t see or seldomly touch. For professionally drilling the wire no other tool does such a nice and quick job like these twisting pliers.

A perfect little tool that's just as handy in the saddlebag as it is in the shop. Most commonly used to lockwire the nuts on the inner primary cover, but can come in dozens of uses on the road in emergency situations. Kit with tool, washers and 7,5 m stainless steel wire.

Excellent for removing gaskets and carbon deposits in hard to reach places. With stainless steel bristles. Sold each.

We‘ve tried other spring hooks, and they just didn‘t cut it - either the hook was too flimsy or we couldn‘t get enough leverage. The MaxHook‘s T-handle provides plenty of leverage. And instead of welding the hook onto the rod which can become brittle and break, this one has been CNC machined right out of the rod stock, then bent. The best spring puller and also a great value.

High quality, hardened, black oxide finished tools for easy installation of threaded studs. Sizes are engraved for quick identification.

This handy little telescopic tool is 15 cm long and extends up to 65 cm. The tip holds a strong magnet which can lift objects up to 1 kg from those dark and hard to reach spots. Includes pocket clip.

Theses special sockets feature internal spiral edges and quickly and easily remove damaged or rounded studs, nuts and bolts. Simply place socket on damaged fastener and turn with 3/8" drive handle or impact gun.

These 1/2” hex head, multi-spline, left hand, extractors are designed to remove broken studs, bolts, socket screws and fittings. They can be used with sockets and flat wrenches. The shoulder on each extractor prevents it from entering too deeply and expanding the workpiece. Available as complete set or as individual tools.

Assortment with 10 hose clamps of each sizes, including special pliers for installing them.
Clamp sizes: 8.7 mm, 12.8 mm, 13.8 mm, 14.8 mm, 15.7 mm, 16.2 mm, 17 mm, 19.8 mm and 21 mm

Back in the old days tire levers were part of the factory tool kits. These levers are exact reproductions of the period parts. They are forged from carbon steel and heat treated, so they‘ll flex but do not bend. At 215 mm (8.5”), they‘re long enough for the necessary leverage, but small enough to fit into most saddlebags.

Changing tires is about as much fun as painting your house, but having the right tools can make the job easier. These tire levers are forged and heat treated, using carbon steel alloy. They‘ll flex, not bend, giving you confidence. At 240 mm (9.5”), they‘re long enough for the necessary leverage, but small enough to fit into most saddlebags.

The Peeler is amazingly efffective at removing silicone gasket material and paper or fiber gasket residue. It works much easier and faster than common knives or scrapers.
Its unique, self-leveling conical blade does not dig or gouge into surfaces. Free rotation of the blade maintains a good, sharp cutting edge without nicks or flat spots. It can be used in any direction: forward, backward, sideways and circular.
Features a short, easy-to-hold wooden handle for close, powerful control of the blade. If necessary, the hardened steel blade can be re-ground and is easily replaced.

Another bestseller from Duck for a wide range of uses. This masking tape in duck-yellow is resistant and flexible and reduces the risks of scratches while working on soft and sensitive surfaces. It is easy to remove without any residues. It can be very helpful, too, not to loose general overview in your workshop by labeling boxes and parts, or just for writing down ideas that might get lost. It is waterproof, resistant to oil and thinners, it can be torn off by hand and is therefore simply essential for any workshop.