Axel Joost Multi Flash Plus Plug & Play
- Flasher unit by Axel Joost Elektronikbox
- fits Sportster 1996-2003, Big Twin 1996-2000
- for OEM wiring harness
- W x H x D: 36 x 11 x 15 mm
- 12 V
- 2…70 W
- with Deutsch pin housing
- Germany
- gross weight: 51 g
Axel Joost Elektrinikbox's Multi Flash Plus module is now available in a new version with pre-crimped connectors and housings, suitable for Harley-Davidson Sportster and Big Twin models from 1992 to 2003 —that is, models with turn signal buttons and without a data line in the wiring harness. Anyone who knows the price of an original Harley-Davidson turn signal module—if it is available at all—will easily accept that the automatic shut-off of Axel Joost’s compact units is time-based rather than speed-dependent.
As with the universal version of the Multi Flash Plus, the self-cancelling function depends on the duration of the signal when the handlebar button is pressed. By grounding the green wire, the self-cancelling function can be disabled, requiring the turn signals to be switched off manually by pressing the handlebar button again.
The Multi Flash Plus Plug & Play comes in the familiar compact, high-quality design of all Elektronikbox products. CE and RoHS compliant.
Turn Signal Flasher Units for Harleys
We are often asked which flasher units are suitable for which indicators and which model and yes - there is a large selection and it is not easy to keep an overview.
There are basically two types:
The first type has only two connections. At one connection, 6 or 12 V from the ignition lock goes into the flasher unit and at the second, "chopped" current for the indicators comes out. This flasher unit is placed in the wiring harness before the switch or button. And if a Harley has buttons, such as a 1979 Sportster, the finger must remain on the button while the indicator is flashing. These simple flasher units are available as original (or identical ones) (WW 13-297, 13-435 and -436) or electronic versions (WW 11-089 or 11-658).
The second type of flasher unit has at least six connection wires and is equipped with a microprocessor - regardless of if it's an original Harley part or one from our extensive range of accessories. Two of the six wires are 12 V and ground, two provide the output for the right and left turn signals and via the two remaining wires the microprocessor receives an activation pulse for the right or left indicators. Because a microprocessor can do much more than just chop current for lamps, comfort functions are usually integrated: time-dependent automatic switch-off or continuous flashing, short operation for lane changes, programmable number of flashing cycles.The activation pulses come from buttons on the handlebars, in the original configuration, with the parts from Badlands or with WW 11-684 the buttons send a 12 V pulse to the microprocessor. With most other variants from elektronikbox, Kellermann or motogadget the handlebar buttons connect the activation wire briefly to vehicle ground. However, you may find this out in the instructions or wiring diagrams on our websites before you buy.
The electronic versions of the first flasher unit type and all accessory versions of this second flasher unit type have a pre-programmed flashing frequency, regardless of whether bulbs or LEDs are connected. Original versions or identical to the OEM stuff versions of both types are load-dependent and only cycle correctly with the usual 21 W bulbs.
See also:
Axel Joost H-Box Control Module
Axel Joost D-Box Control Module
Have any questions?
Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com