Home Shop Oil Tank Oil Tanks Oil Tanks OEM Replacement WR Daytona Oil Tanks for 45”/750 cc Flatheads
Click here to recommend this page to others

WR Daytona Oil Tanks for 45”/750 cc Flatheads

On long distance races like the Daytona 200 the small WR gast tanks meant several gas stops and consequently time loss. Thus the HD-Race department decided to use both tank halves for gas and even enlarge them to 5 gallons. The oil went under the seat in a special cast aluminum oil tank. WRs didn’t have a battery so this space wasn’t used anyway. This is a faithful reproduction of the original WR race bike part and will fit all 45”/750 cc Flathead solo bikes with magneto ignition. Installation requires hardware to be made or obtained.

... more
less
Oil tank »WR Daytona«, fits 45”/750 cc solo models 1937-1952, cast aluminum, with filler cap, replaces OEM 83501-41, Europe
W&W# Picture Price incl. VAT* Available from warehouse Germany?
50-059 WR Daytona Oil Tanks for 45”/750 cc Flatheads bare 1,970.00 € each
in stock
50-069 WR Daytona Oil Tanks for 45”/750 cc Flatheads sand blasted 1,970.00 € each
in stock
* The price includes German VAT (19% or reduced rate of 7% for Books).

See also:

  • Morris Magneto MM3 for Sidevalves and Sportsters →1970

    Morris Magneto MM3 for Sidevalves and Sportsters →1970 Genuine classics for purists. Feature manual retard and - if correctly adjusted - advance automatically after starting.

  • Wrecking Crew Tramp I Handlebars

    Wrecking Crew Tramp I Handlebars The shape of these handlebars is inspired by the legendary Tramp I, a Knucklehead drag bike built by S&S founder George Smith in the early Fifties. They ...

  • Samwel 45”/750 cc Flathead Frames

    Samwel 45”/750 cc Flathead Frames Reproduction 45” Flathead frame which can be used as stock replacement or as a basis to build a bobber or chopper from scratch. Dimensions and details exactly ...

  • Wrecking Crew Generator Block-Off Plates with Spark Plug Mounts

    Wrecking Crew Generator Block-Off Plates with Spark Plug Mounts Back in the days it was common to carry a set of spare spark plugs easily accessible on the motorcycle. Thus in case of a necessary change you didn’t have to ...

  • Brake Drum Cooling Rings

    Brake Drum Cooling Rings A literally cool accessory for the rear brake drum of your 45”/750 cc Flathead solo machine. This cooling ring simply clamps on the outside and keeps ...

  • Jack Tracey Racing Windshields

    Jack Tracey Racing Windshields It is said that back in the late 1940s a man named Jack Tracey decided to make windscreens for the WR race bikes at Daytona. Unlike anything else available at ...

  • PanAm Oil Slide

    PanAm Oil Slide Oil change without a mess! This rubberized aluminum alloy sheet allows you to form an individual funnel or trough to direct your waste oil from the ...

  • Cannonball WR Style Racing Gas and Oil Tanks

    Cannonball WR Style Racing Gas and Oil Tanks Authentic reproductions of the original WR gas tanks as used on the 1946-1952 production race bikes of the same name. The narrow shape and omission of the ...

  • The GasBox WRTT Racer Mufflers

    The GasBox WRTT Racer Mufflers Standard equipment on the Flathead street racing model, the WRTT. Actually not a muffler because it has no restriction whatsoever and is therefore allowed for ...

  • Wrecking Crew 4-Bolt Manifolds for Flatheads

    Wrecking Crew 4-Bolt Manifolds for Flatheads These manifolds allow the trouble-free installation of 4-bolt, 1-1/2” Linkert carburetors, like M35, M74 or MR, on sidevalves. The selection includes a version ...

  • PanAm Oil SAE 50

    PanAm Oil SAE 50 Our traditional single grade lubricant for engine and transmission for heavy thermal and shear loads. Complies with H-D recommendations up to 1984 for Big ...

Have any questions?

  • Our sales team will be glad to help out:
    Mondays - Fridays 08:00-18:00 CET, Saturdays 09:00-13:00 CET
    Phone: +49 / 931 250 61 16
    eMail: sales@wwag.com