This oil pad soaks up to 2 l of fluid, i.e. oil, gas, etc. A reinforced top and an anti-slip foil on the bottom side make the PanAm oil pad a useful helper in the workshop, garage or living room.

Tork Max' unique formula of friction boosting components helps you open those stubborn, hard to open screws and bolts. Phillips heads, slotted heads, hex heads, socket heads, Tork Max improves the friction between tool and screwhead by up to 800%. No more slipping tools. Gives a sure and positive feel in your screwdriver tip.
Also recommended when mounting high ape hangers or similar handlebars. A few drops of Tork Max applied on the connecting surfaces between handlebar and risers: more friction in the handlebar-riser connection means no more slipping handlebars under acceleration or braking.

Pre-TwinCam engines have a spring loaded ball check valve to prevent the engine oil from seeping down to the crankcase. These check valves don’t last forever. If you try to start your engine after a lengthy period of inactivity (e.g. winter), the oil in the crank case gets forcefully ejected via the breather. Creating an ungodly mess on your garage floor.
Installing a manually operated valve in the oil feed line from tank to oil pump can prevent this, but carries the risk of forgetting to open it. Resulting in major engine trouble. And we mean major.
This here nifty PanAm shut off valve is also installed in the feed line. With a little difference: once closed, the ignition is cut out too. No inadvertently starting the engine with this baby.
The tough polyamide housing has several mounting holes which offer all sorts of possibilities to secure it to the frame or other convenient hard points.