Replacement Parts

Rebuild kit for S&S L-series carburetors (models GAL, MGAL, MGL y Early Style G, GA, F y FA). Each kit contains: throttle plate, throttle plate shaft, throttle plate bushings, return spring, as well as all necessary screws and gaskets.

Replacement heat insulator blocks for S&S Two Throat carburetors.

These ultimate carburetor repair kits comprise all the parts included with the regular Super E/G kits plus the parts of the accelerator pump repair kit.
1 throttle shaft with 2 throttle plate screws, 1 throttle plate, 2 lockwashers, 2 nuts, 1 throttle plate nylon washer, 1 throttle plate return spring, 1 pump actuator spring, 1 throttle plate O-ring, 1 bowl gasket, 4 bowl screws, 3 pump srews, 2 cable clamp screws, 1 ejector nozzle O-ring, 1 needle assembly, 1 accelerator pump bellows seal, 1 diaphragm, 1 diaphragm spring, 1 pump pushrod, 2 pump cover O-rings, 2 ball check, 1 ball check spring, 2 idle mixture screws, 1 idle mixture screw O-ring, 1 needle seat w/ fuel line elbow, 1 overflow hose, 1 plunger spring, 1 idle speed screw, 1 idle speed screw spring, 1 float pin, 1 VOES fitting cap,

These standard rebuild kits for S&S Super E/G carburetor bodies include:
1 throttle shaft with 2 throttle plate screws, 1 throttle plate, 2 lockwashers, 2 nuts, 1 throttle plate nylon washer, 1 throttle plate return spring, 1 pump actuator spring, 1 O-ring insulator caburator , 1 bowl gasket, 1 O-ring ejector nozzle , 1 accelerator pump bellows seal, 1 O-ring idle mixture screw, 1 VOES- plug,

Basic repair kits which comprises all the gaskets and O-rings plus a new needle valve to overhaul your Super E/G carburetor.
1 throttle plate nylon washer, 1 throttle plate O-ring, 1 bowl gasket, 1 gasket carb-air cleaner, 1 ejector nozzle O-ring, 1 accelerator pump bellows seal, 1 diaphragm, 1 diaphragm spring, 2 pump cover O-rings, 1 ball check spring, 2 ball valves, 1 needle assembly, 1 overflow tube,

This kit includes:
1 diaphragm, 1 diaphragm spring, 1 pump pushrod, 2 pump cover O-rings, 2 ball check, 1 ball check spring,

Upgrade your older S&S Super E or G carburetor with this 90° fuel inlet swivel fitting. It can be rotated a full 360 degrees so you can use common fuel lines without the usual space problems.

Flexible insulator tube which protects the fuel line from scuffing or against heat influence when running it between the cylinders.