This pin punch set is made with utmost precision from high quality CDA 360 hex brass rod extruded in a mill in the USA and beautifully polished. They are machine turned and designed for critical work were non-marring and non-sparking are of importance. Carefully made to drive pins or to gently move steel objects.
The 8-piece set comprises the following punches:

• punch 1/16”
• punch 3/32”
• punch 1/8”
• punch 5/32”
• punch 3/16”
• punch 7/32”
• punch 1/4”
• punch 5/16”

Classic Harleys well into the 1960s feature lots of slotted screws on engine, transmisison, primary etc. which you don´t want to tighten or loosen with a cheap screwdriver. It will mar the slots in no time and make you look a poor mechanic. This special edition The Cyclery screwdriver set includes the exact size screwdriver for most slotted screws you find on older H-D models. They feature hollow ground tips to perfectly fit the respective slot, avoiding damages and keeping your expensive hardware in good shape. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these screwdrivers provide that great wood handle feel that only gets better with time. Classy tools for classic bikes - an ideal combination.
The 6-piece set comprises the following blade sizes:

• #1 = 1.0 x 4.7 x 160 mm
• #2 = 1.0 x 6.0 x 183 mm
• #3 = 1.2 x 6.0 x 205 mm
• #4 = 1.3 x 7.0 x 209 mm
• #5 = 1.4 x 9.3 x 168 mm
• #6 = 1.7 x 9.3 x 272 mm

Rugged and sturdy lift, which allows to raise motorcycles up to 500 kg to a maximum height of 51 cm without problems, alone and while standing, by means of a foot pump. Can be locked in two postions to relieve the hydraulic jack during longer parking periods. Simple to use and steplessly adjustable. The specially developed caster wheels provide a low profile, which easily enters beneath the chassis and they allow to move the lift in the garage or workshop with the motorcycle mounted. Rubber mats prevent frame tubes from being scuffed. Accessory adapters are available for models with chassis versions, which cannot rest directly on the lift.
Dimensions:

• min. height: 115 mm (100 mm without wheels)
• frame width: 380 mm
• frame length: 710 mm

Professional pliers which allow fast adjustment directly on the workpiece. The fine adjustment ensures optimum adjustment to differently sized workpieces and a user-friendly handle position.
Guards prevent operators’ fingers being pinched and a favourable lever action results in optimum transmission of force.
The self-locking function on pipes and nuts prevents slipping on the workpiece and lowers the required handforce. Gripping surfaces feature special hardened teeth (approx. 61 HRC). Made from chrome vanadium electric steel, forged and oil-hardened