General Accessories

Bearing Adjuster Nuts for Classic Springer Forks

Accurate reproductions of the bearing adjuster nuts with pressed-on dust shields for Classic Springer forks. The versions for Timken bearings feature bottom faces which are machined flat.

more …

Paughco Bearing Adjuster Nuts

more …

Steering Head Nuts for Classic Springer Forks

more …

Acorn Steering Head Nuts

more …

Bates Top Plugs for Classic Springer Forks

These Bates top plugs for Springer forks with legs that are threaded at the upper end, have a longer thread to allow a flush seat with the top of the fork clamp. This significantly enhances the appearance of this assembly. Simply screw into the fork legs and fix in the desired position with medium-strength Loctite. Aesthetically, the Bates top plugs match period correct all Springer forks and fork clamps. They are made of steel and are available in parkerized and chrome.

more …

Nacell Top Plugs for Classic Springer Forks

Custom plugs which fit reproduction springer forks with legs that are threaded at the upper end. Fit W&W Classic Springer and Cannonball I-Beam forks with legs that are threaded at the upper end.

more …

Colony Top Plugs for Classic Springer Forks

If period correct is not an issue for you and you already have other bolts of this type on your bike, then these Allen style custom plugs might be your choice. They fit W&W Classic Springer and Cannonball I-Beam forks with legs that are threaded at the upper end.

more …

The Cyclery Spare Plug Holders for Classic Springer Forks

A quick answer to the question where to put a set of spare plugs. These adapters screw into the legs of Classic Springer Forks which feature legs with M20 x 1.5 threads at the upper end. If present, the stock top covers are omitted. Of course, you can use them with original forks, too, if you tap the legs.

more …

Bates Riser Adapters

Adapters which will allow you to install any custom riser directly on top of the Springer fork side bars with internal M20x1.5 thread. Must be used with custom upper fork clamp that - apart from stabilizing the fork - offer lateral support for the risers, to avoid flexing of the adapters.

more …

Bates Riser Adapters Lane Splitter

Adapters which will allow you to install our Cannonball Lane Splitter bar directly on top of the Springer fork side bars with internal M20x1.5 thread. Must be used with custom upper fork clamp that - apart from stabilizing the fork - offer lateral support for the risers, to avoid flexing of the adapters.

more …

Bates Riser Shims for Springer Forks

When combining a Classic Springer fork with a Custom triple clamp and Custom risers, it is not always simple to achieve the correct riser position for mounting the handlebars, despite the use of our riser adapters. This situation can be remedied by these water-jet cut shims.

more …

Conversion Kit 45" Springer Fork

Professional solution for the problem of mounting a 45” rigid fork with 7/8” neckpost to a Big Twin frame neck. Kit includes all necessary components.

more …

Fork Spring Stabilizer and Cover Kits

These fork spring cover kits for 1931 up Springer forks include a stainless steel fork stabilizer, 2 chrome cap nuts and 4 fork spring covers.

more …

Fork Spring Covers

Chromed covers for all Harley Springer forks from 1931–up.

more …

Springer Rockercovers

Authentic reproduction of the rocker covers with Bird logo which was found as original accessories back in the 40's. Fit all 1930–1957 HD Springer forks. Beautifully chrome-plated.

more …

Bates Rod Locks for Springer Forks

Good things always come back, even if it sometimes takes some 80 years. This lock type was available as an accessory during the 1920’s and 1930’s and the Bates lock is made after a historic pattern of that era. The main advantage is that the lock always stays on the fork during the ride without the need to stow it in the saddlebag or elsewhere. To bar the wheel simply swivel the stainless steel rod (Ø 12 mm) from its home postion, guide it through the wheel to the other side of the fork and lock it there. Easy installation on the spring fork with low profile aluminum clamps. The selection includes locks for OEM Springer forks and clamps for W&W Classic Springer and I-Beam forks.

more …

Bates Fender Mounts

Very nice solution for mounting a small custom fender on your Classic Springer fork close to the front tire of 19” or 21” wheels. These clamps with brackets feature a smart design with only two tiny set screws visible. They install in minutes on the spring fork and hold your choice of a custom mudguard. Bolt hole distance on the brackets is 65 mm, with a maximum fender width of 120 mm. With stock FXSTS fenders you get a straightforward bolt-on solution. The selection includes clamps for OEM Springer forks and clamps for W&W Classic Springer and I-Beam forks.

more …

The Cyclery Apron Guards

Windshields with the lower part made from canvas are recommended to be be mounted with an apron guard, sometimes called hand guard, to protect the windshield fabric from being scuffed by the fork springs.

more …

Top and Tensioner Nuts for Classic Springer Forks

more …

Steering Damper Upper End Kits

Kits which contain all upper end small parts for the steering dampers of 1936-up Twins with Springer forks.

more …

Mounting Kit for Monroe Type Springer Shock Absorbers

more …

WLA Ammo-Box and Gun Bracket Mounting kit

This complete and correct mounting kit contains reproductions of all fasteners necessary to mount the machine gun bracket and ammunition box on WLA front ends.

more …