Login

I forgot my password? Create account
>
Shop
>
Workshop, Garage and Tools
>
Workshop and Garage Equipment
>
Consumables

Consumables

PanAm Oil Pads
PanAm Oil Pads
This oil pad soaks up to 2 l of fluid, i.e. oil, gas, etc. A reinforced top and an anti-slip foil on the bottom side make the PanAm oil pad a useful helper in the workshop, garage or living room.
more …
PanAm Workshop Rag
PanAm Workshop Rag
To keep your trusty Milwaukee tractor free from road grime and garage dust, any old rag, worn out t-shirt or holed sock usually will do. But if you’re the type who likes his bike to shine, you may have a similar attitude towards the most humble of workshop tools, the shop rag. We applied our collective know how to the manufacture of these beautiful PanAm shop rags. They’re prepared for any dirty job you can throw at them, while gently and tirelessly reminding you of the life enhancing qualities of PanAm lubricants.
more …
Dock66 State Prison Rag
Dock66 State Prison Rag
The alternative to lint-free, microfiber-high-tech-fleece cloths: the good ol’ cleaning rag. Always good to shine a greasy and dusty classic bike and somehow more appropriate. Was sufficient back then and will do a great job today.
more …
Duck Tape
Duck Tape
Disintegrating saddlebags in Patagonia? A cracked seat bracket near the Darien Gap? Torn trouser seams in wintery Northwest Territories of Canada? The mother of all adhesive tapes will help you out in most situations. ”Original Duck” duct tape is your go-to tool for all your everyday fixes due to its holding power, great stretch and conformability and easy-to-tear design. Since decades users trust its durability and long-term performance, when a workshop is far away and a quick solution is needed.
more …
Duck Masking / Marking Tape
Duck Masking / Marking Tape
Another bestseller from Duck for a wide range of uses. This masking tape in duck-yellow is resistant and flexible and reduces the risks of scratches while working on soft and sensitive surfaces. It is easy to remove without any residues. It can be very helpful, too, not to loose general overview in your workshop by labeling boxes and parts, or just for writing down ideas that might get lost. It is waterproof, resistant to oil and thinners, it can be torn off by hand and is therefore simply essential for any workshop.
more …
Corotex 800 Fabric Tape
Corotex 800 Fabric Tape
Versatile rayon fabric. Back in the days the factory used a very similar tape to fasten wiring harnesses to the frame and racers use it to cover handlebar grips for an improved grasp.
more …
Insulating Tape
Insulating Tape
Universal use acrylic tape for insulating or fixing wires on your motorcycle. Such a roll should be in every toolbox.
more …
Dock66 State Prison Polishing Cloth
Dock66 State Prison Polishing Cloth
The alternative to the good old cleaning rag: the State Prison polishing cloth.
Aluminium rims, tanks, and other parts on the motorcycle that require a delicate finish can be treated with this polishing cloth made of 100% cotton with a fine structure, lint- and scratch-free.
more …
Tesa Fabric Tape
Tesa Fabric Tape
Versatile rayon fabric. Back in the days the factory used a very similar tape to fasten wiring harnesses to the frame and racers use it to cover handlebar grips for an improved grasp.
more …
Loctite 248 Threadlocker Sticks medium strength
Loctite 248 Threadlocker Sticks medium strength
Loctite products are available with different characteristics and in differing strength codes.
Loctite 248 is a threadlocker compound stick that hardens anaerobic (no air present).
Properties:
medium strength, brakeaway torque if applied to a M10 bolt: 23 Nm (200 in-lbs), for all metals, processing time 5 min. , semi-solid, color code: blue, processing temperature: -55 - +150°C (-65 - +300°F), use for: screws and bolts up to M12 resp. 1/2” (fenders, risers, handlebar clamps, forks etc.),
more …
Loctite 222 Threadlocker Low Strength
Loctite 222 Threadlocker Low Strength
Loctite products are available with different characteristics and in differing strength codes.
Loctite 222 is a threadlocker compound that hardens anaerobic (no air present).
Properties:
low strength, brakeaway torque if applied to a M10 bolt: 6 Nm (50 in-lbs), best use for stainless steel and non-ferrous metal, processing time 20 min. , low viscosity, color code: violet, processing temperature: -55 - +150°C (-65 - +300°F), typical applications: stainless steel and aluminium threads, up to M5 and #10 resp.,
more …
Loctite 243 Threadlocker Medium Strength
Loctite 243 Threadlocker Medium Strength
Loctite products are available with different characteristics and in differing strength codes.
Loctite 243 is a threadlocker compound that hardens anaerobic (no air present).
Properties:
medium strength, brakeaway torque if applied to a M10 bolt: 26 Nm (230 in-lbs), for all metals, oil-tolerant, processing time 10 min. , low viscosity, color code: blue, processing temperature: -55 - +180°C (-65 - +360°F), use for: screws and bolts up to M12 resp. 1/2” (fenders, risers, handlebar clamps, forks etc.),
more …
Loctite 2701 Threadlocker High-Strength
Loctite 2701 Threadlocker High-Strength
Loctite products are available with different characteristics and in differing strength codes.
Loctite 2701 is a threadlocker compound that hardens anaerobic (no air present).
Properties:
high strength, breakaway torque if applied to a M10 bolt: 33 Nm (290 in-lbs), for breakaway heating to 250°C (395°F) preferred, for all metals, processing time 10 min. , low viscosity, color code: green, processing temperature: -55 - +180°C (-65 - +360°F), typical application: studs, crankpin nuts, clutch hub nuts,
more …
Loctite 638 Retaining Agent High-Strength
Loctite 638 Retaining Agent High-Strength
Loctite products are available with different characteristics and in differing strength codes.
Loctite 638 is a locking agent compound that hardens anaerobic (no air present).
Properties:
high strength, breakaway torque: 31 Nm (275 in-lbs), fills gaps up to .25 mm (.01”), for breakaway heating to 250°C (395°F) preferred, for all metals, oil tolerant, processing time 4 min. , low viscosity, color code: green, processing temperature: -55 - +180°C (-65 - +360°F), typical application: bearings and bushings,
more …

Consumables: the things you will need to buy every once in a while

Workshops and garages won't do without mechanics' little helpers: duck tape, rags, mats. Tape will help you in masking, insulation, wrapping, protecting purposes, rags will support your wiping, cleaning and polishing efforts. Last but not least, mats under bike and lift will minimize mishaps once they happen. And they will … ;-)

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com