Workshop Electrics

The next generation version of the XP-1 is out! It features 400 amps of starting current and — brace yourselves — up to 2,000 peak amps. Enough to start up not only your 2017 FLTCU but any V8 or Mack truck. It also powers and charges laptops, cell phones, iPhones, iPads, Tablets, Blue Tooth devices and more. Just charge the XP-1 once and easily take back-up power wherever you go.
Features:
USB A exit port (5 V/3 A, 9 V/2 A or 12 V/1.5 A), USB C in/out port (outlet power: 5 V/3 A, 9 V/3 A, 12 V/2.5 A, 15 V/2 A or 20 V/1.5 A), jump start port, LED light (steady, strobe, SOS), LCD screen instead of state LEDs, Built-in over-charge and over-discharge, reverse polarity, short circuit protections, 30 s automatic power-off when not in use,
Scope of delivery:
Micro-Start XP-1 power bank, Jump start wire and clamp kit, Wall socket slow charger, plugs A and C (125 … 240 V, 50 hz, 0.5 A), USB A to C cable, Carrying case, Manual (English, Deutsch, Français, Español),

The next generation version of the XP-10 is out! It features 600 amps of starting current and — brace yourselves — up to 3,000 peak amps. Enough to start up not only your 2017 FLTCU but any V8 or Mack truck. It also powers and charges laptops, cell phones, iPhones, iPads, Tablets, Blue Tooth devices and more. Just charge the XP-10 once and easily take back-up power wherever you go.
Features:
15 V / 10 A DC exit port, USB A exit port (5 V/3 A, 9 V/2 A or 12 V/1.5 A), USB C in/out port (outlet power: 5 V/3 A,12 V/2.5 A, 15 V/2 A or 20 V/1.5 A), jump start port, LED light (steady, strobe, SOS), LCD screen instead of state LEDs, Built-in over-charge and over-discharge, reverse polarity, short circuit protections, 30 s automatic power-off when not in use,
Scope of delivery:
Micro-Start XP-10 power bank, Jump start wire and clamp kit, Wall socket slow charger, plugs A and C (125 … 240 V, 50 hz, 0.5 A), USB A to C cable, Carrying case, Manual (English, Deutsch, Français, Español),

Bahco battery chargers and maintainers are fully automatic and micro-processor controlled. Being of the "connect and forget" - type means that you hook them up to your motorcycle battery in periods of non-use and you need not care about the device until you want to go for a ride. The charger/maintainer will automaticcaly keep the optimum charge for your battery.
The device cannot be damaged by reversed polarity. It will automatically check the battery state and type and chose the appropriate charging program:
Recovery, Softstart, Bulk mode, Absorption, Monitoring, Float mode, Maintain.,
A practical hook on its back side allows for hanging it out of the way in convenient areas. Besides the common crocodile clips, the charger/maintainer comes with a 7.5 A fused harness with 6 mm ring connectors, that has a protected SAE plug.
A scrolling digital display provides step by step instructions to properly follow the charging of the battery such as “FULLY CHARGED AUTO MAINTAINING”, “CONNECT CLAMPS”, and “ANALYZING BATTERY”.
The charger/maitainer works with any lead-based or Lithium-Ion (LiFePo4), e.g. Antigravity, vehicle battery that has 12 V 6 Ah - 58 Ah. Max output current is 3 A. The device is sealed waterproof (IP 68).

Compact diagnostic charger and tester for 12V motorcycle lead acid batteries, incl. the maintenance-free gel-type batteries.
You can charge the battery directly as usually or select the program to charge via the 12V port on CAN-bus models.
The OptiMate 4 Dual Program is the ultimate all-in-one tool for 12V battery care at home, that diagnoses, recovers, charges, tests and optimally maintains your battery automatically until it is disconnected. This includes Low voltage pulse recovery for even more effective recovery of badly neglected, sulphated batteries; a user friendly battery test at connection; a slick weatherproof enclosure with built-in mounting lugs and improved energy efficiency.
Recommended for batteries in the 2 - 50 Ah range. The LED display with numerous indications informs about the operating state.

Special OptiMATE charger for your Antigravity battery or other Lithium-Ion (LiFePO4/LFP type) batteries. It will protect your investment and guarantee your battery will perform as advertised for a very long time. With 5.6 Amps of charge current available the OptiMATE Lithium multi step ampmatic program recharges and balances cells within the battery quickly and efficiently. Its maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. Works with batteries in the 2.5 - 100 Ah capacity range and with 100-240V input.

The AccuMATE 6/12 is a versatile, automatic charger and maintainer for all modern and classic 6 & 12V lead-acid and gel-electrolyte type batteries. It will charge and maintain batteries of capacity up to about 75Ah. Also ideal for long term maintenance of the batteries of irregularly or seasonally used vehicles and vintage & collectors vehicles.

This compact charger is completely encapsulated in epoxy. The devices therefore are protected according to IP67, i.e. they are completely dustproof and can even be temporarily submerged (1.5 m water depth, up to 30 min.) Charging in damp rooms and garages is therefore completely ok. However, due to the exposed electrical connections (socket-plug, battery terminals), operation in rain or snowfall is not recommended by the manufacturer. The housings have holes for wall mounting.
Scope of delivery:
wire harness with clamps and 7.5 A fuse, wire harness with M8 eyelet connectors and 7.5 A fuse to be installed on your Harley-Davidson, 2 screws 3.8 mm,
Device characteristics:
220…240 V ≈ 50 Hz, plug type C, exit 12 V =, 800 mA, measures: ≈11 x 7 x 4 cm,

Sturdy test lamp to examine circuits in your lighting and ignition systems. Applicable for 6 to 24 V. Comes with protective screw-on cap, 70 cm lead and alligator clip.

Compact tool for single, multiple and fine stranded wires of 0.2 up to 6 mm² (AWG 24-10) cross-sections with standard PVC insulation. It adapts automatically to the respective cable cross-section and prevents damage to the conductor. The handy shape and low weight provide high operation comfort. With its narrow head style it can also be used in confined areas. An integrated with wire cutter cuts copper and aluminium wires up to 2.5 mm². The length stop can be adjusted from 6.0 - 18.0 mm for cutting the same stripping lengths during repetitive work. The body is made from fibreglass-reinforced plastic, the interchangeable blades are made from special oil-hardened tool steel.

In addition to their function as needle-nosed pliers these pliers are ideal when you are working on your wiring harness. They grip, bend and cut medium hard and hard wire with precision, induction hardened cutting edges (hardness approx. 60 HRC). They also feature three stripping holes and four positions for crimping end sleeves (ferrules). Made from forged and oil-hardened Vanadium electric steel.

A unique thing about this crimper is the quick release interchangeable 5 pair die set that just click into place. They will handle the most common terminals including insulated and non-insulated terminals, D-Sub terminals, open barrel terminals and naturally spark plug wire terminals.
The set features non-slip plastic grips for comfort and ease of use. Comes in a molded plastic case.

One of the brightest headlamps by Princeton Tec, the Apex has been a favorite of extreme outdoorsmen and cavers for years. The pinnacle of waterproof (1meter) LED headlamp design, it incorporates a single regulated Maxbright LED plus four regulated Ultrabright LEDs. It is capable of a powerful spot beam or a bright flood, and two switches make changing modes (low beam - high beam - flasher) intuitive. Proprietary heatsink technology allows the LEDs to burn brighter and longer. A small LED (@ 12 o’clock above the Maxbright LED) works as a battery power meter and informs about the remaining burn time. The Apex is compatible with alkaline, lithium and rechargeable batteries.