Cycle Electric End Bell Regulators 'LeBeeF Edition'
- Regulator »End Bell LeBeef Edition Low Voltage« by Cycle Electric
- for 65A Type generators
- fits Big Twin 1958-69 and Sportster 1965-77
- 13.8 V Charging voltage
- cast aluminum, polished
- 12 V
- USA
- gross weight: 660 g
These electronic regulators with their integrated needle bearing replace the entire end bell bearing support plate/brush cover. The connecting wires are routed on the outside and have the correct length for 58 and 65A type generators.
On a stock 45" generator the regulator's cooling fins will be aligned horizontally. On stock Big Twin generators, the fins are aligning with the cylinder cooling fins.
This special edition brings a stock-like vintage look to your generator. Cycle Electric is now producing Mattias "Le Beef" Andersson's hand polished cast prototype in a limited run. State of the art technology meets Le Beef's inimitable style.
Low Voltage Regulators
Low voltage regulators have a max charging voltage of 13,8 V instead of the usual 14,5 V. There are cases, where the lower charge voltage is advisable: e.g. when the battery sits in the oil tank, as in Softails, where overheating of the battery has been known during hot weather, or when a 6 V to 12 V conversion places the 12 V battery inside the oil tank, where overheating of the battery also may be a problem.
Also, when using a modern lithium ion battery, the maximum charge voltage is 14,6 V. The stock regulator cut off voltage of 14,5 V sits right on this limit. Using a low voltage regulator positively avoids damage to the battery. If you are unsure about which regulator type to choose, contact our service team, they'll be happy to sort you out.
See also:
Cycle Electric Generators with End Bell Regulator
Cycle Electric Generators with End Bell Regulator "LeBeeF Edition"
Cycle Electric End Bell Regulators
Have any questions?
Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com