Relays Custom

This relay opens one contact and closes the other one when activated. Can be used as opener or closer or to toggle between the contacts.

This relay permits the use of a single push button at the handlebar to control the HI/LO beam function of your headlamp. The push button must switch to ground. With lights switched on you just touch the button to change between high and low beam. Especially recommended in conjunction with custom handlebar controls.
The use of a high beam indicator light is mandatory.

This small relais by the German company Motorrad-Design allows high/low beam activation through push button switches. Hides easily in the headlight housing.
Use of a high-beam indicator light is mandatory.

This module allows to flash the headlight or to switch between high and low beam with a single push button.The flash function works only with ignition switches that have different positions for ON and lights. Simply installs on bulb socket and hides in most any headlamp housing.

A small, compact relay to switch almost any kind of electrical devices. It moves high loads and currents near the switched devices (e.g. your double headlamp), and significantly relieves the handlebar switches. Handle bar and ignition switches switch the low triggering currents only. This allows the use of small gauge wires at the switches. Damaged or burned contacts and wires will never happen again.
A threaded hole in the center of the housing enables fast and easy mechanical installation almost anywhere at the bike. The housing is absolutely water proof and vibration resistant.

Socket housings that can be connected to a plug strip. Makes for a very tidy harnesses.