Easy Clutch

Easy on the hand with smooth engagement combined with no-slip performance at full throttle, high rev take-offs - these are guide lines which are not easy to meet for a clutch system. While modern bikes perform satisfactory in stock configuration, they soon reach their limits with increased engine potential. A 124 cui. S&S powerplant literally smokes the original clutch or requires clutch springs and lever pulling efforts that only some Arnold Schwarzenegger would find acceptable. This problem goes to extremes in drag racing and that´s exactly where they developed a brilliant device to fight it: The variable pressure clutch.
Its principle is an array of weighted levers on the pressure plate which increase pressure on the clutch pack due to centrifugal forces when the engine revs up. Clutch slippage is made nearly impossible with this set-up. The drawback is that pure variable pressure clutches are not suitable for street riding with its varying traffic situations. The Japanese T.P.P. pressure plates so-to-say combine the best of both worlds: conventional clutch actuation supported by a variable pressure type pressure plate. The big advantages of this combo are that much lighter diaphragm clutch springs can be used for up to 50% easier lever effort and the weighted levers increase pack compression up to 60% for zero loss of engine performance through slippage. The kits show the best combination of low lever effort and secure clutch pressure for the respective model/engine group. Patent protected in Europe.

The German company Müller improved the design of inner and outer ramp with astonishing results. Up to 40% reduction of manual effort to pull the clutch lever make city traffic, freeway jams or windy roads a breeze, increase in comfort is significant. The stock clutch cable can be maintained, time for installation equals change of the cable.

This simple and effective conversion kit improves the leverage of the release mechanism. The result is a 40%   reduction of the manual effort required to pull the clutch lever! Ideal for female riders or those who frequently find themselves caught in stop-and-go traffic. Complete kit including detailed installation instructions.

Exact reproduction of the original Harley “Mousetrap” clutch release assembly. It was introduced with the factory‘s first footshift Big Twins to compete against the English bikes which flooded the American market in the early fifties.

Chrome-plated clutch cable bracket to convert foot clutch or Mousetrap models to later 1968-up cable style clutch actuating.

Yer finally fed up using that stone hard clutch every time you need to change a gear on your way to yoga class, the local library or your favourite soda fountain? W&W has the fully analog solution, made from natural wood and steel. Customize your hand and arm muscles with – ta-daaah! - HAND GRIPS. Compatible with every OS on the market. No messy wrenching, no dirty hands. No homologation necessary. No USB port needed. Easy pump-O-action!