Sportster Style Gas Tanks
Price and stock:
Item №
35-010
Price incl. VAT
197.48 €
Available
4
Ready for immediate delivery from our Würzburg, Germany warehouse
The price includes 31.53 € German VAT.
- Gas tank »Sportster Style«
- steel, bare, low tunnel
- volume: 10.5 l
- required gas cap: cam-style 1955-1982
- required petcock: 3/8” NPT or 2 x 1/4” NPT
- gross weight: 3.3 kg
Sportster style gas tanks with universal fore and aft bracket for your Chopper or Bobber project bike.
All gas tanks by W&W Cycles are delivered unpainted and unsealed. Before the paint job and final installation please consider the following:
- We consistently receive tight gas tanks from the manufacturers, both Custom and OEM replacements.
- Problems mostly occur during or after installation. Hence, before a pressure test and before painting - a probationary tensionless installation is highly recommended. Any leverage on the tank mounts spells trouble. Better use our selection of small parts.
- To avoid corrosion always fill your tank to the max during longer downtimes or seal it on the inside.
Accessories:
Prism Fuel Valves
These small petcocks fit direct to either a 1/4" or 3/8" NPT bung on your gas tank. This keeps your gas tank looking very clean. They feature a 5/16" diameter hose barb on one end and a fuel filter on the other. The manufacturer recommends 1/4" ID fuel line for a snug, leak proof fit. Rotating the cylindrical piece with the two grooves is how the fuel is toggled on and off. No reserve. Length measured without hose barb and filter.
OEM Style 1955-1972 Gas Caps
The design of these gas caps matches the original caps from the years of manufacture 1955-1972. From 1965, the left side was equipped with a non-vented gas cap to prevent overflow. This also fits older models and all aftermarket tanks.
Pipe Plugs
See also:
Tankdoc Gas Tank Restoration Kits
Rust inside the motorcycle tank can significantly affect the function and safety of your Harley. Even small rust particles can break off and enter the fuel system, clogging the carburetor, fuel injection system, and fuel lines. This leads to rough running, loss of power, and increased wear on components. In advanced cases, rust causes pinholes that allow fuel to leak – a dangerous and costly problem....
KRM Tank Cleaner and Sealer
Formerly Kreem, now KRM: Recommended for older gas tanks which are rusty or dirty on the inside. Tank prep A & B remove corrosion and prepare the surface for the KRM Sealer. The Sealer cures hairline cracks (not holes!) and its tough white skin permanently seals the tank and permanently protects it against rust. One bottle contains enough sealer for tanks up to 13 liters capacity.
Have any questions?
Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com