We use cookies for analytics, advertising and to improve our site. To find out more see our privacy policy.

Login

I forgot my password? Create account
>
Shop
>
Tank
>
Tanks
>
Universal Use
>
King Sportster Gas Tanks

King Sportster Gas Tanks

Price and stock:
Item №
35-080
net price
$224.20
Available
4
Ready for immediate delivery from our Würzburg, Germany warehouse
* Tax free shipping.
piece
Save to wish list
Description
Facts

The King Sportster tanks are approximately 5 cm wider than the early original Sporty tank. This adds capacity for longer intervals between gas station stops on long runs. With universal fore and aft bracket for your Chopper or Bobber project bike.

  • Gas tank »King Sportster«
  • steel, bare
  • volume: 13.2 l
  • required gas cap: cam-style 1955-1982
  • required petcock: 3/8” NPT or 2 x 1/4” NPT
  • required petcock: 3/8” NPT or 2 x 1/4” NPT
  • gross weight: 4.82 kg

All gas tanks by W&W Cycles are delivered unpainted and unsealed. Before the paint job and final installation please consider the following:

  • We consistently receive tight gas tanks from the manufacturers, both Custom and OEM replacements.
  • Problems mostly occur during or after installation. Hence, before a pressure test and BEFORE painting - a probationary (stress-free!) installation is highly recommended. Any leverage on the tank mounts spells trouble. Better use our selection of small parts.
  • To avoid corrosion always fill your tank to the max during longer downtimes or seal it on the inside.

Accessories:

Prism Fuel Valves

Prism Fuel Valves

These small petcocks fit direct to either a 1/4" or 3/8" NPT bung on your gas tank. This keeps your gas tank looking very clean. They feature a 5/16" diameter hose barb on one end and a fuel filter on the other. The manufacturer recommends 1/4" ID fuel line for a snug, leak proof fit. Rotating the cylindrical piece with the two grooves is how the fuel is toggled on and off. No reserve. Length measured without hose barb and filter.
more …
OEM Style 1955-1972 Gas Caps

OEM Style 1955-1972 Gas Caps

The design of these gas caps matches the original caps from the years of manufacture 1955-1972. From 1965, the left side was equipped with a non-vented gas cap to prevent overflow. This also fits older models and all aftermarket tanks.
more …
Pipe Plugs

Pipe Plugs

more …

See also:

Tankdoc Gas Tank Restoration Kits

Tankdoc Gas Tank Restoration Kits

A complete system by the German company Busch to restore common motorcycle gas tanks. Cleaner, rust remover and sealant - the set contains them all. The high performance components will clean out even bad cases of corrosion and will dependably seal hairline cracks and small holes. Within 8-12 hours the sealant can be applied repeatedly which extends sealing mileage by up to 100%.
more …
KRM Tank Cleaner and Sealer

KRM Tank Cleaner and Sealer

Formerly Kreem, now KRM: Recommended for older gas tanks which are rusty or dirty on the inside. Tank prep A & B remove corrosion and prepare the surface for the KRM Sealer. The Sealer cures hairline cracks (not holes!) and its tough white skin permanently seals the tank and permanently protects it against rust. One bottle contains enough sealer for tanks up to 13 liters capacity.
more …

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com