Shop Oil Tank Oil Filters
Oil Filter Brackets and Related Parts

Oil Filter Brackets and Related Parts

PanAm Mounting Brackets for External Oil Filter
PanAm Mounting Brackets for External Oil Filter
These replacement brackets for external oil filters are precise reproductions of NOS stock parts. Every detail and angle is exact, so the oil filter is positioned as it should be.
more …
Mounting Brackets for External Oil Filter
Mounting Brackets for External Oil Filter
Stock replacement brackets for external oil filters.
more …
Wrecking Crew Oil Cooler and Filter
Wrecking Crew Oil Cooler and Filter
Oil cooler and filter combination which ideally fills the empty space on custom generator/alternator engines. Of course it can also be installed in lieu of the generator on all HD motorcyles which were factory outfitted with such a device and don’t require a permanent charging system, e.g. magneto equipped motorcycles.
more …
Lowbrow FiltroMax Oil Filter Bracket
Lowbrow FiltroMax Oil Filter Bracket
The FiltroMax mount by Lowbrow is a great looking solution for installing a high-volume aftermarket oil filter on your motorcycle. It comes with a steel bracket that welds onto the frame for custom installation wherever tickles your fancy. For those who prefer the bolt-on way a front motor mount bracket is also available.
more …
Custom Oil Filter Bracket
Custom Oil Filter Bracket
Cool and clean oil improves engine protection and performance. Our oil filter kits with spin-on oil filter mount in front of the engine and permit the filter to help cool the oil.
more …
Jagg Anti Rotation Brackets
Jagg Anti Rotation Brackets
Applied to the Jagg oil filter adapters for Twin Cam models to insure the adapter will not rotate during oil filter removal.
more …
S&S Twin Cam Style Oil Filter Bracket
S&S Twin Cam Style Oil Filter Bracket
These filter brackets are machined from solid billet aluminum and polished, but since looking good isn't everything they have some very useful features, too. First, the position of the filter has been shifted slightly to give additional clearance between the filter body and the crankcase for easier filter installation and removal. Second, they are machined to make it easy to install an oil cooler in the pressure side of the system. An oil coolers is especially useful for big inch applications, when towing a trailer or for riding in hot weather conditions. If the cooler is not needed, simply install pipe plugs (included) instead of the hose fittings.
more …
CPV Oil Filter Bracket
CPV Oil Filter Bracket
Oil filter backing plate which is machined from billet aluminum and features two m8 studs for universal mounting.
more …
Hot Rod Oilfilter Bracket
Hot Rod Oilfilter Bracket
Cast aluminum oil filter plate for universal application. Sturdy design with three mounting holes for easy installation.
more …
Oil Hose Adapters for Hot Rod Oilfilter Bracket
Oil Hose Adapters for Hot Rod Oilfilter Bracket
more …
Jagg Oil Radiator Adapters Offset
Jagg Oil Radiator Adapters Offset
Works with all H-D models with front-mounted spin-on oil filters. Mounts between base plate and oil filter and avoids due to its offeset construction filter to sensor contact. A thermostat is incorporated.
There's a separate, optional anti-rotation device available.
more …
Ernst Drip-Free Oil Funnel
Ernst Drip-Free Oil Funnel
Change the oil in your Harley without the headache of the mess! Works with most Harley-Davidson models with external oil filter. The Ernst Drip-Free funnel featuers a unique and superior U-shaped design for draining and replacing oil filter cartridges but is also great for refilling fluids. Fits perfect in tight places on the transmission and primary. A hangtab allows for dripping and pegboard storage.
more …
Gaskets
Gaskets

Oil filter bracket, mounting parts for oil filters

Mounting brackets and adapters for external oil filters on rigid and articulated frame Big Twins or for oil filter cartridges on Evolution and Twin Cam Big Twins and for custom projects.

Why do oil filters for Harleys need a separate bracket?

The air-cooled V-twin and single-cylinder engines from Harley-Davidson have a different oil circuit from the competing brands from the Far East, Italy or Germany. On those bikes, the engine oil is filtered on its way from the oil pump to the engine. On Harleys, a second pump chamber is used to return the engine oil to the oil tank after it has passed through the engine. To avoid having to completely redesign the engines, the first oil filters were therefore installed in the return line to the oil tank. The oil takes the dirt and combustion residues out of the engine with it. The grime is filtered out in the filter on its way to the oil tank, and only the filtered, clean oil is stored in the oil tank.

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com