Cannonball StealthStarter SSK-R Kick Drive for Baker 6-in-4 Gearboxes

Twice the Comfort: Just press the Button

Expand the comfort zone of your already installed Baker 6-in-4 gearbox for big twins in your rigid frame bike. With the Cannonball Stealth Starter you can now have a powerful electric start system without losing your kick start functionality. The system, specially designed for this Baker gearbox, bolts right in between the gearbox case and the kicker cover.

Installing the starter kit is straightforward for seasoned home wrenchers. The kit contains all necessary parts and hardware, and the chrome 12-point nuts (as used by Baker) make for a pleasing finish.

The popular Baker 6-in-4 gearbox (for open or tin primaries) has an optional electronic speedometer pickup opening on the rear of the case. If you’ve been using this, the speedo pickup unfortunately has to be relocated to a wheel or a brake disc when the SSK system is to be installed. the necessary hardware can be found here.

The now unused speedometer pickup opening needs to be plugged - use the OEM Baker plug or the Cannonball Sensor Hole Plug, which gives you a little more creative freedom with its countersunk head.

However, due to the many taste and/or configuration driven options available, there are parts that need to be ordered separately: Starter button, cables and battery.

6 Volt systems will have to be upgraded to 12 Volts. Depending of your bike’s configuration, several options are possible, please inquire with our knowledgable staff.

The Baker 6-in-4 case’s dimensions make modifications to the exhaust system necessary. When adding a SSK-E starter, some additional points need to be addressed:

• The exhaust system may have to be modified further to accommodate the kicker cover’s increased offset.

• The rear fender may have to be cut out or "dented" to accommodate the starter motor.

Any questions you might have about the starter will be answered here service@wwag.com Or just grab your phone and dial +49 931 250 61 16 English spoken.