A good funnel is a must have in any workshop when it’s time for an oil change or a refill. The annoying part of these jobs was to stow away the oil dripping funnel into a dark corner where you would find it a few months later contaminated inside-outside with dust, bugs and other debris. The PanAm funnel puts an end to this problem because it features screw-on caps at the top and bottom which can be removed for action and which keep the inside of your funnel perfectly clean during storage. The flexible spout makes it more versatile as it allows to direct the funnel tip in tight spots.

This funnel makes it easy to add oil to your primary cavity. It simply snaps into the derby cover opening to permit hands-free filling. Its flat cone shape prevents mess or spills.

Reduce the mess and cleanup required when changing the fluids on your motorcycle. This king size drain pan is designed specifically for use with motorcycles. The low-profile design fits easily under lowered motorcycles and slips beneath rigid frame bikes even when on the side stand. The 10-quart capacity will capture 2 engine oil changes or the complete drain fluids (engine oil, primary and transmission) from one motorcycle. This drain pan is large enough to catch the oil from the entire length of the primary and is sized to hold and drain an inverted primary cover. It features a raised hardware corral, a filter drain surface and a pressure vent hole to prevent oil burping. The drained waste oil is sealed safely inside the pan with gasketed caps and plugs. Convenient carrying handle simplifies transport to an approved waste oil facility.

A heavy duty, multi-pupose lubrication spray that cleans and lubricates surfaces and parts. It protects from corrosion and penetrates into the smallest openings with its powerful capillary action. The special formula of Pan-a-Lube provides long-term protection and lubrication and its low surface tension prevents leak currents and fights moisture. Due to its compact size you can stow it easily in the saddlebag.

This little grease tube should be part of any tool roll to soothe squeaky joints and bearings, to ease stubborn pivots and much more. With its special lithium-based formula Pan-a-Grease provides long-term protection and lubrication.

Oil change without a mess! This rubberized aluminum alloy sheet allows you to form an individual funnel or trough to direct your waste oil from the hard-to-reach oil tank drain hole or oil filter plate to any suitable container. Of course, you can also use it to fill fresh oil into your tank. Tapered at one end so it can be shaped to reach tight spots. You can reshape and use it a thousand times and on different bikes. With suspension eye so you can hang it up for drip-off. Easy to clean.

This oil pad soaks up to 2 l of fluid, i.e. oil, gas, etc. A reinforced top and an anti-slip foil on the bottom side make the PanAm oil pad a useful helper in the workshop, garage or living room.

Tork Max' unique formula of friction boosting components helps you open those stubborn, hard to open screws and bolts. Phillips heads, slotted heads, hex heads, socket heads, Tork Max improves the friction between tool and screwhead by up to 800%. No more slipping tools. Gives a sure and positive feel in your screwdriver tip....

Pre-TwinCam engines have a spring loaded ball check valve to prevent the engine oil from seeping down to the crankcase. These check valves don’t last forever. If you try to start your engine after a lengthy period of inactivity (e.g. winter), the oil in the crank case gets forcefully ejected via the breather. Creating an ungodly mess on your garage floor....

This is a combination of drain pan and waste oil container, which should be basic equipment for every workshop or garage. It will make an oil change as easy as pie and environmentally sound.