The original miniature Spinner Cap by Mooneyes is similar to the vintage 50s style spinner cap but has the raised MOON letters. Designed to fit Mooneyes oil tanks and other tanks with 1-1/2" bungs with 1-5/16”-12 thread.

Our premium multigrade engine lubricant. 100% synthetic. For unrestricted usage in engine, wet clutches, primary drives and transmissions. Better engine protection, more positive clutch action and smoother shifting. Less friction and reduced wear. This high performance lubricant complies with API SL.

A perfectly fitting wall clock for your workshop, garage or biker home so you will aways know when it is time to ride, wrench or for other nice things.

You can never have enough banners in in your workshop, garage or biker home, especially when they look as classy as these. Made from vinyl so the they can also be used outdoors.

Oil change without a mess! This rubberized aluminum alloy sheet allows you to form an individual funnel or trough to direct your waste oil from the hard-to-reach oil tank drain hole or oil filter plate to any suitable container. Of course, you can also use it to fill fresh oil into your tank. Tapered at one end so it can be shaped to reach tight spots. You can reshape and use it a thousand times and on different bikes. With suspension eye so you can hang it up for drip-off. Easy to clean.

The classic Mooneyes T-shirts which have been around since the 1960s and probably will never go out of style.

Pre-TwinCam engines have a spring loaded ball check valve to prevent the engine oil from seeping down to the crankcase. These check valves don’t last forever. If you try to start your engine after a lengthy period of inactivity (e.g. winter), the oil in the crank case gets forcefully ejected via the breather. Creating an ungodly mess on your garage floor.
Installing a manually operated valve in the oil feed line from tank to oil pump can prevent this, but carries the risk of forgetting to open it. Resulting in major engine trouble. And we mean major.
This here nifty PanAm shut off valve is also installed in the feed line. With a little difference: once closed, the ignition is cut out too. No inadvertently starting the engine with this baby.
The tough polyamide housing has several mounting holes which offer all sorts of possibilities to secure it to the frame or other convenient hard points.

Round Mooneyes logo stickers in various sizes.

Don’t get stranded 2 km before you reach the gas station. This little emergency aluminum gas tank holds one extra litre of fuel and gets you back on the road again.The cap features a vent valve.

Liquid filled 0-60 psi oil pressure gauge with chromed housing and a black face with Mooneyes logo.

Spun aluminum oil tank which mounts with two rubber insulated brackets on most motorcycles. Frame tabs have to be fabricated and welded to suitable spots. It holds 3 or 4 quarts of oil and features top return and vent fitting and bottom feed.

The Starburst MOON wheel discs (two pieces, left and right side) cover all 16-inch spoke wheels of motorcycles. They are machined from aluminum and made to fit 16" rims with spokes and disc or drum brake. The discs are measured at 15" diameter so they fit inside the drop center and clear the hub and brake. One also has a cut out for the valve stem. They are held in place with three mounting screws (not included).

Our traditional single grade lubricant for engine and transmission for heavy thermal and shear loads. Complies with H-D recommendations up to 1984 for Big Twins and Sportsters up to 1981. This high performance lubricant complies with API CF.