Jims Pinion Gears for Big Twin 1954-1989
Pinion gears in proven JIMS quality. The color code is identical to the factory codes so they can be used as stock replacement. If the color code is unknown we recommend to order a gear in the middle size range. These sizes fit 9 out of 10 engines and provide adequate clearance under most circumstances. As a rule of thumb it is preferable to allow slightly more gear lash than too little.
- Pinion gear by Jims
- fits Big Twin 1954- early 1977
- color code: yellow
- steel, 21 teeth
- Ø 36.71 mm
- replaces Harley-Davidson part number HD 24010-54
- gross weight: 150 g
Cam gear noise
While some positive backlash is necessary to prevent gear tooth overloads, excess backlash (“clicking“) may sound annoying but won´t hurt anything. To correct noisy gears use either a larger cam gear or pinion gear. Tight fitting pinion and cam gears will cause very noticeable whining as a result of running with zero backlash which is a serious problem. In this case a smaller cam gear or pinion gear is required.
Have any questions?
Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com