

Shop

Engine

Lower End

Gear Case

Gear Case Parts for Big Twin 1954-1969



Gear Case Parts for Big Twin 1954-1969

Item №

Version

Price incl. VAT*

unit

Availability in warehouse Germany

60-479

Nut by S&S; for Pinion gear; fits Big Twin 1954-1989; steel; thread: 5/8”-24 LH; replaces OEM HD 24023-54

Spacer by S&S; for Pinion gear; fits Big Twin 1954-1989; steel; replaces OEM HD 24703-54B

Oil screen; for tappet oiling; fits Big Twin 1966-1969; steel; replaces OEM HD 24981-66

Bushing by Jims; for Pinion shaft; fits Big Twin 1954-1992; bronze; replaces OEM HD 25582-54

Bushing; for Pinion shaft; fits Big Twin 1954-1992; bronze; Over-/Undersize: +0.005 ”; replaces OEM HD 25582-54

Bolt; for Timing gear shaft (left-hand thread); fits Big Twin late 1959-1969; steel; replaces OEM HD 1430

Washer; for Cam shaft; fits Big Twin 1957-1999; steel; replaces OEM HD 25550-57A

Needle bearing; for Cam shaft; fits Big Twin 1958-1999; steel; OD: 27.1 mm, 12.6 mm thick; tolerance class: ABEC 3; replaces OEM HD 9058

Woodruff key; for Pinion gear / Oil pump drive gear; fits Big Twin 1954-1989; steel; L x W x H: 12.2 x 2.4 x 4.8 mm; replaces OEM HD 23985-54

Dowel pin; fits 45 cui/750cc 1937-1973, Big Twins 1930-1999, Sportster →1990; on various bearing bushings; steel; length: 1/4”; Ø 1/8”; replaces OEM HD 271, and 275; gross weight: 1 g

Snap ring; for Idler gear shaft; fits 45 cui/750cc 1937-1973, Big Twins 1915-1969; steel; replaces OEM HD 25810-15; gross weight: 1 g

Drive gear by S&S; for Ignition system; fits Big Twin OHV 1936-1969; steel / bronze, clockwise rotation; replaces OEM HD 25850-36A; USA; gross weight: 380 g

Gasket by James Gaskets; for Oil screen; fits Panhead 1952-1965; cork; replaces OEM HD 24990-52; gross weight: 1 g

Seal washer by James Gaskets; for Drain plug / Transmission case; fits model K and Sportster 1954-1967, Big Twin 1958- 1986; Oil screen Big Twin 1966-1969; brass; replaces OEM HD 62702-52; gross weight: 1 g

Nut; for Pinion gear; fits Big Twin 1954-1989; steel; thread: 5/8”-24 LH; replaces OEM HD 24023-54; gross weight: 20 g

Oil screen; for tappet oiling; fits Big Twin OHV Late 1952-1962; complete; steel; replaces OEM HD 24985-52; gross weight: 40 g

Oil screen; for Separator; fits Big Twin OHV 1936-1969; steel; replaces OEM HD 25275-36; gross weight: 10 g

Separator; fits Big Twin OHV 1936-1969; steel; replaces OEM HD 25279-36; gross weight: 20 g

Spring; for Seal ring; fits all SV 1939→, Big Twin OHV 1939-1969; spring steel; replaces OEM HD 24699-37; gross weight: 10 g

Oil screen; for tappet oiling; fits Big Twin OHV 1952-1962; steel; replaces OEM HD 24975-52; gross weight: 10 g

Spring; for Oil screen; fits Big Twin OHV 1952-1962; spring steel; length: 11 mm; replaces OEM HD 24992-52; gross weight: 10 g

Spring; for Tappet oil screen; fits Big Twin 1963-early 1966; spring steel; length: 60 mm; Ø 11 mm; replaces OEM HD 24979-63; gross weight: 10 g

Spring; for Tappet oil screen; fits Big Twin 1966-1969; spring steel; length: 29 mm; Ø 9 mm; replaces OEM HD 24982-66; gross weight: 20 g

Bushing by Jims; for Cam shaft / Crankcases; fits Big Twin OHV 1936-1957; red bronze; Over-/Undersize: +0.000 ”; replaces OEM HD 25597-36; gross weight: 30 g

Bushing; for Cam shaft; for gearcase cover; fits Big Twin OHV 1936-1969; red bronze; length: 17.2 mm; Over-/Undersize: +0.000 ”; ID x OD: 20.6 x 25.4 mm; replaces OEM HD 25581-36; gross weight: 30 g

Shaft by Jims; for Idler gear; fits Big Twin OHV 1936-1969; steel; length: 48 mm; Ø 14.1 mm; replaces OEM HD 25791-36; gross weight: 50 g

Shaft by Jims; for Circuit breaker gear; fits Big Twin OHV 1936-1969; steel; length: 76 mm; Ø 14 mm; replaces OEM HD 25856-36; gross weight: 70 g

Bushing; for Idler gear; fits 45 cui/750cc 1937-1973, Big Twin Flathead 1937-1948, Big Twin OHV 1936-1969; red bronze; replaces OEM HD 25785-30A; gross weight: 20 g

Bolt; for Breaker drive gear stud; fits Big Twin OHV 1936-1958; steel; slotted; thread: 1/4”-20; replaces OEM HD 25859-36; gross weight: 30 g

Bolt; for Idler gear shaft; fits Big Twin OHV 1936-1969; steel; slotted; thread: 1/4”-20; replaces OEM HD 25794-36; gross weight: 20 g

Drive gear; for Generator; fits Big Twin OHV 1936-1969; steel, 51 teeth; replaces OEM HD 25775-36; gross weight: 290 g

* The price includes German VAT (19% or reduced rate of 7% for Books).

Accessories:

Screw Kits for Cam Cover: Big Twin 1936-1969

more …

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com

Gear Case Parts for Big Twin 1954-1969

Related:

Accessories:

Screw Kits for Cam Cover: Big Twin 1936-1969

See also:

OEM Type Oil Screen Case Plugs

Have any questions?

 Login

Gear Case Parts for Big Twin 1954-1969

Related:

Accessories:

Screw Kits for Cam Cover: Big Twin 1936-1969

See also:

OEM Type Oil Screen Case Plugs

Have any questions?