The Cyclery Springer Front Fenders for Big Twin and Servi-car

A small part which makes a big difference - at least for the connoisseur. This neat little butterfly was used to hold the 5/8” wide fender braces in place on all models 1934-1939. The factory spot welded it but you can TIG-weld or braze it, too. Three are needed per bike, two on the front and one on the rear fender.

On vintage and classic Harley-Davidsons the factory used rivets all over the place to connect and fix brackets, braces, controls, switches, lamps, etc. The selection below includes all rivets we found in the old books. If you find one on your old scooter which is not listed, let us know.

On vintage and classic Harley-Davidsons the factory used rivets all over the place to connect and fix brackets, braces, controls, switches, lamps, etc. The selection below includes all rivets we found in the old books. If you find one on your old scooter which is not listed, let us know.

Trim strip set; for H-D OEM fenders 1939-1948; front; stainless steel, polished; with mounting clips; replaces OEM HD 59200-39; gross weight: 110 g

A small part which makes a big difference - at least for the connoisseur. This neat little butterfly was used to hold the 5/8” wide fender braces in place on all models 1934-1939. The factory spot welded it but you can TIG-weld or braze it, too. Three are needed per bike, two on the front and one on the rear fender.

As early as in the 1930’s factory accessory catalogs showed decorative reflectors or jewels, which proved very popular for decades. You could place them almost everywhere on the bike to achieve that extra shine. Our selection of Red Fox reflectors includes various types for multiple purposes, each in different colours. They are authentic reproductions of the period parts with real glass lenses and correct details. Indicated lengths are measured without stud.

Detailed kits consisting of reproduction screws, nuts and lockwashers to mount original or reproduction fenders on models with Springer style fork and rigid frame.

The original parts are mostly missing or in very bad condition. These high quality reproductions of the Harley fender tips will solve a big problem during serious restoration projects.

These little mascots were popular accessories in the Fifties among bikers as well as in the Hot Rod scene. The Factory offered them in the official accessory catalog where you could choose from lions, jumping horses or greyhounds, i.e. rather nice and innocent motifs. However, there are nastier versions, too. One of those is the "Cock-a-snoot" devil, which is a little Lucifer which thumbs his nose at someone. Needles to say, this was the preferred mascot on Hot Rod bumpers and Bobber fenders, because it perfectly demonstrated the owners feelings about his competitor and his mill, especially after he had just outraced him. The mascot offered here is a detailed and accurate reproduction after a pattern originating from these glorious days. Made from pewter and highly polished, with 3/8”-16 mounting thread.

Nice reproduction of a period accessory of the Golden Fourties and Fifties. Universal application on most front and rear fenders. All monting small parts are included.

The story goes like this: when the weather is nice you enjoy the breeze in your face and when it turns bad you wish you had some protection. So what can you do? The solution is the smart Hanson roll-up windshield, which appeared on the accessory scene in the late 1940s. With this one you can have both. In its lower position the screen tucks on the handlebars and you are "in the wind", but rolled-up it almost provides the protection of a regular windshield. Up and down positions can be established in seconds. These reproductions are accurately made after the period part and will look right at home on any American classic motorcycle.

Top notch, restoration-quality reproductions of the rigid frame rear mudguards for Big Twins 1936-1948, with exact shaping and 3-piece construction (spot welded side panels) of the factory parts and raised swages for the stock fender trim. The 1936-1938 version features the correct butterfly reinforcement on the brace center and the Air-flo taillight cover. Made in small batches from expert craftsmen with sweat and love. No disappointments.