Oil Lines

Steel replacement oil lines for ioe models 1915-1929. They feature a cad-plated finish and include the correct pipe nuts.

Reproductions of the original rigid steel oil lines with nuts as used on V-Models 1930-1936.

Reproductions of the original rigid steel oil lines with nuts as used on 45”/750cc Models 1938-1973.

Reproductions of the stock steel oil lines with fittings as used with stock oil tanks and stock oil pumps.

Reproductions of the original canvas braided rubber oil lines with pre-installed fittings as used on WLC Canadian Army models. However, they fit all 45”/750cc Flatheads for custom applications.

Reproductions of the stock oil lines with nuts as used with stock Horseshoe oil tanks and stock oil pumps 1938–1964.

These tight-fit rigid feed, return and vent lines must be completed with a flexible oil line for connection to the oil pump. The very tight radius at the upper end of the lines creates more space for installation, as there is relatively little space to the heads, especially on Big Twin Flatheads with aluminum heads or Shovelheads in rigid frames. For use in rigid frames and horseshoe oil tanks with 9/16"-24 thread and 30° cone connections.

Reproductions of the stock steel oil lines with nuts as used with stock Horseshoe oil tanks and stock oil pumps 1936–1964.

Cotton braid covered oil line for the oil pressure gauge (#4560-36) that was installed with the Skull type dash of 1936 Knuckleheads and all 1937 Twins.

Original oil tanks of 1936-1937 Knuckle- and Flatheads were equipped with banjo fittings. Regarding the simplicity and the clean look of it one could say this style was very much ahead of its time. This DIY oil line kit contains all the necessary components to build your custom oil lines and get this clean and simple look on your bike. The oil lines are pre-flanged to fit the conical oil pump fittings (WW 50-130). Welding, soldering and pipe bending skills are required for the installation.
The kit includes:
3x Banjo bolts, chrome-plated, G 1/4", 3x Weld-in threaded bungs, bare, G 1/4", 3x Solder banjo fittings for oil lines 10 mm, 3x Oil pump sleeve nuts, bare, 6x Aluminium seal washers, 3x Straight oil lines, bare (flanged) 50 cm long, OD: 10 mm, thickness: 1,5 mm,

This oil line kit comes in handy on rigid frame Knuckleheads and Panheads which are equipped with stock horseshoe oil tanks and S&S aluminum oil pumps. They are made with a "tight fit", which means they are bent to closely follow the oil tank to clear the exhaust.

High quality hoses which have a black fabric cover for additional protection and to prevent scratches. Nice nostalgic look and a true alternative to stock hoses.

A wide selection of oil and fuel lines which feature a fine braid which prevents cracks and damage through heat or scour for a long service-life. Available with your choice of a shiny stainless steel braid finish, a standard a zinc-plated industrial finish or with anodized colours.

Reinforced rubber hoses in popular sizes which are braided with your choice of 100% copper or brass material.