Login

I forgot my password? Create account
Shop Electrical Batteries Batteries OEM Replacement
OEM Low Maintenance AGM Batteries

OEM Low Maintenance AGM Batteries

Select variant:
11-529
fits Touring 1997→; W x H x D: 167 x 175 x 128 mm; 28 Ah; cold cranking current (SAE): 405 A; pole connection: M6 (screws included); replaces OEM HD 66010-97, and 66000212
11-513
fits all FXE and FXR, Sportster 1979-1996 with electric starter, Softail 1984-1990, Buell S2; W x H x D: 175 x 155 x 100 mm; 19 Ah; cold cranking current (SAE): 330 A; pole connection: M6 (screws included); replaces OEM HD 65991-82, 65991-75, and 66000209
 11-508
fits FLT, FLHT, FLHR →1996; W x H x D: 205 x 165 x 90 mm; 22 Ah; cold cranking current (SAE): 345 A; pole connection: M6 (screws included); replaces OEM HD 66010-82, and 66000210
 11-524
fits Softail and Dyna Glide 1997-2016, Sportster 1997-2003, Buell 1999→, V-Rod 2007→ (exc. VRSCR); W x H x D: 175 x 155 x 87 mm; 17.5 Ah; cold cranking current (SAE): 315 A; pole connection: M6 (screws included); replaces OEM HD 65989-97, and 66000207
 11-528
fits Softail and Dyna Glide 1991-1996; W x H x D: 175 x 155 x 100 mm; 19 Ah; cold cranking current (SAE): 330 A; pole connection: M6 (screws included); replaces OEM HD 65989-90, and 66000211
 11-531
fits V-Rod →2006, VRSCR →2007, Buell XB1R 2003; W x H x D: 150 x 145 x 87 mm; 12 Ah; cold cranking current (SAE): 225 A; pole connection: M6 (screws included); replaces OEM HD 65948-00, and 66000206
 11-532
fits Sportster 2004-2021; W x H x D: 150 x 145 x 85 mm; 12 Ah; cold cranking current (SAE): 225 A; pole connection: M6 (screws included); replaces OEM HD 65958-04, and 66000208
Price and stock:
Item №
11-529
Price incl. VAT
339.98 €
Available
8
Ready for immediate delivery from our Würzburg, Germany warehouse
The price includes 54.28 € German VAT.
piece
Save to wish list
Facts
Description
Documents
Good to know
  • Battery
  • fits Touring 1997→
  • W x H x D: 167 x 175 x 128 mm
  • 12 V
  • 28 Ah
  • cold cranking current (SAE): 405 A
  • pole connection: M6 (screws included)
  • replaces Harley-Davidson part number HD 66010-97, and 66000212
  • USA
  • gross weight: 9.5 kg

AGM (Absorbent Glass Mat) batteries offer quite a few advantages compared to standard motorcycle batteries. They are leak-resistant, the sulfuric acid is bound in glass mat fleeces between the plates. They are sealed and can be installed tilted by 45°. During normal use they will not gas, so there's no destilled water to be refilled. Due to their construction they deliver about 1/3 more cranking amps than their "wet" brothers, which you have to check for fluid level often. These batteries are not perfect though: whenever your mount is left unridden for a while, you have to maintain them by a charger.

Instructions

Sealed Lead Acid Batteries

If a battery is said to be "maintenance-free" it means you won't have to fill destilled water and you are not able to do so because of the lacking plugs. Nevertheless, with long storing time, they require periodic check of voltage and if too low, a recharge.

See also:

Bates Kill Bill Battery Switches

Bates Kill Bill Battery Switches

Terminal and thumb screw assembly which can be mounted on any suitable place on the motorcycle. It connects the battery’s ground (negative) terminal and cable with the frame....
more …
Bahco Lead/Lithium Battery Charger and Maintainer

Bahco Lead/Lithium Battery Charger and Maintainer

Bahco battery chargers and maintainers are fully automatic and micro-processor controlled. Being of the "connect and forget" - type means that you hook them up to your motorcycle battery in periods of non-use and you need not care about the device until you want to go for a ride. The charger/maintainer will automaticcaly keep the optimum charge for your battery....
more …
OptiMATE 4 Dual Programm Charger and Optimiser

OptiMATE 4 Dual Programm Charger and Optimiser

Compact diagnostic charger and tester for 12V motorcycle lead acid batteries, incl. the maintenance-free gel-type batteries. ...
more …
Deltran 800 Charger

Deltran 800 Charger

This compact charger is completely encapsulated in epoxy. The devices therefore are protected according to IP67, i.e. they are completely dustproof and can even be temporarily submerged (1.5 m water depth, up to 30 min.) Charging in damp rooms and garages is therefore completely ok. However, due to the exposed electrical connections (socket-plug, battery terminals), operation in rain or snowfall is not recommended by the manufacturer. The housings have holes for wall mounting....
more …

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com