Multi-purpose O-Rings

fits Rocker Shafts XL 1957-1985, XLCR 1000, BT 1966-1984, Lower Pushrod Cover XL 1979-1985, Upper Pushrod Cover BT late 1979-early 1981 and XL 1979-1983, Cylinder base fitting FLT late 1981, Starter deflector plate 1965-1985 (BT 4 speed), Oil Line to oil cooler connector VRSC 2004→, kicker shaft BT 1936-1985; ID x OD: 19 x 24 mm, 2.5 mm thick; replaces OEM HD 11101

fits Oil filter wing nut BT 1966-1982, XL 1966-1978, Tappet Screen Plug BT late 1970-1984, Check Valve Plug BT late 1978-1998(9), Drain Plugs Dyna 1992→ and Touring 1993→, Drain Plug Transmission and oil tank Softail 2000→, Drain Plug primary housing Dyna 2006→, Softail and Touring 2007→, Drain Plug primary housing and transmission Sportster/Buell 1977→, under fork damper: XL and FX 1971-1972; ID x OD: 10.8 x 14.4 mm, 1.8 mm thick; replaces OEM HD 11105

fits Tachometer Plug XLCH 1962-1969, Tachometer Cable XLCH 1962-1965, Rocker Shaft left end XR1000 1983-1985, Tappet Guide mounting screw XL 1986-1990, Fittings/Oil line to pump Buell 2006-2009 and XR1200X 2009-2013, Fittings/ Coolant lines Touring Twin Cooled 2014→; ID x OD: 9.1 x 12.7 mm, 1.8 mm thick; replaces OEM HD 11110

fits Pushrod cover mid position Big Twin late 1979→, Sportster late 1979-1990, filler plug transmission Big Twin 1993-2006 (Dyna only →2005), engine oil dipstick cover top Dyna 1991-1998, front fork air control on valve assembly banjo Touring models 1987-1996; ID x OD: 17.5 x 22.5 mm, 2.5 mm thick; replaces OEM HD 11132

fits cylinder head dowel pin Twin Cam 88, cylinder base dowel pin all Twin Cam; ID x OD: 10.4 x 14 mm, 1.8 mm thick; replaces OEM HD 11273

fits breather bolt, cylinder head: Softail 2002-2007, FLSTFBS 2016, Touring 1999-2007, Dyna 1998-2007; ID x OD: 14 x 19 mm, 2.5 mm thick; replaces OEM HD 11292

fits Fork tube plug/air valve FLT 1984-1992, piston oiling jets Twin Cam engine; ID x OD: 12.4 x 16 mm, 1.8 mm thick; replaces OEM HD 11140

fits Air Control solenoid, bottom FLT 1984-1985, Bendix main jet; ID x OD: 5.9 x 9.5 mm, 1.8 mm thick; replaces OEM HD 11156, 11171, and 27326-71

fits Pushrod cover top position Big Twin 1984-1998 (Softail →1999), Sportster 1984-1990, oil pump Twin Cam 88; ID x OD: 18 x 24 mm, 3.5 mm thick; replaces OEM HD 11157

fits Cylinder to Head Centering Dowels Big Twin Evolution, Sportster 1986-2007, Buell →2007, Engine Case Halves Centering Dowel Dyna and Touring 1999-2007, Softail 2000-2008, Check Valve XR1200X; ID x OD: 14.5 x 17.5 mm, 1.8 mm thick; replaces OEM HD 26432-76

fits Cylinder to Head Centering Dowels Big Twin Evolution, Sportster 1986-2007, Buell →2007, Engine Case Halves Centering Dowel Dyna and Touring 1999-2007, Softail 2000-2008, Check Valve XR1200X; ID x OD: 13.5 x 17.5 mm, 2 mm thick; replaces OEM HD 26432-76