

>

Shop

>

Carburetor and Injection

>

>

Keihin CV Carburetors

>

Accessories



Accessories

Bates Choke Cable Relocation Bracket

Bates Choke Cable Relocation Bracket

A stainless steel bracket which allows you to relocate your CV-Carburetor choke cable - without disassembly - to the right side of your Sportster, FXR, Dyna or Softail. Mounts switches or the like, too, of course.

Bates Idle Adjuster Screws for CV-Carburetors

Bates Idle Adjuster Screws for CV-Carburetors

Idle adjustment of Keihin carbs can be annoying because the adjusting screw is somewhat hard to reach, in particular with stock air cleaners and large gas tanks. The Bates adjuster solves this problem once and for all. It features a flexible shaft and a large adjuster knob with knurled edge which allows carb adjustment without a screwdriver and as fast as you can say "****! I forgot my ******* tool roll in the garage!"

Bates Stock Aircleaner Eliminator Kit

Bates Stock Aircleaner Eliminator Kit

The installation of a a CV carburetor with Custom air cleaner on a Panhead, Shovelhead or Ironhead Sportster involves two problems:
the protruding upper carb end interferes with the commonly flat backing plates of accessory air cleaners, omission of the stock CV air cleaner results in an unsupported carburetor,
This smart kit inludes a 3 mm spacer plate, which resolves the first problem and a flange adapter with two spiral springs to connect spacer and plate and thus safely hold the carburetor in its rubber flange = resolution of the second problem.
Will fit all motors with 2-bolt Tillotson, Bendix or Keihin (butterfly) manifolds. Installation also requires a 2-bolt flange adapter and a carburetor support bracket, which both need to be purchased separately.

Bates Stock Aircleaner Eliminator Kit 2.0

Bates Stock Aircleaner Eliminator Kit 2.0

If you own a Shovelhead, Panhead or Ironhead Sportster, this bracket is for you. It allows attaching a CV carburetor to 2-bolt Tillotson, Bendix or Keihin (butterfly) manifolds. The bracket even has a mount for the CV-carburetor choke cable. Longer screws and little spacers to go to the carburetor lid are included.
Depending on configuration, installation might require:
2-bolt flange adapter, carburetor support bracket, air cleaner spacer 3mm, gaskets,
Please acquire these items separately.

Mooneyes Idle Adjuster Screws for CV-Carburetors

Mooneyes Idle Adjuster Screws for CV-Carburetors

These Mooneyes idle adjuster screws facilitate the adjusting of the idle speed and, with the cult Mooneyes ball, also cut a fine figure. The ball can be unscrewed and replaced with other Mooneyes valve caps.

Bates Quick Change Float Bowl Screws for CV-Carburetors

Bates Quick Change Float Bowl Screws for CV-Carburetors

Originally developed for race bikes to speed up jet changes but today they are popular among street riders, too. The set comprises four screws with large knurled heads for easy installation and removal of your float bowl without tools.

Bates Adapter for Linkert Air Horns and Covers on CV-Carburetors

Bates Adapter for Linkert Air Horns and Covers on CV-Carburetors

The selection of air horns, velocity stacks and carb covers for Linkert carburetors is pretty extensive and many of them look nicely at home on a CV-carb, too. With this little adapter plate you can make this happen in no time. Precisely CNC-machined from billet for a hassle-free installation.
Since the bolt circle for Linkert carbs is smaller than CV carb bolt circles the adapter somewhat restricts the air intake. All you performance nuts should consider this.

Bates Adapter for Oval Air Cleaners on CV Carburetors

Bates Adapter for Oval Air Cleaners on CV Carburetors

This adapter allows for the installation of OEM or aftermarket air cleaners with recessed backing plate on Keihin CV carburetors. At least that’s what it is intended for, but of course, you can mount any air cleaner, carb cover or air horn with a Tillotson, Bendix or Keihin bolt pattern. It is also useful with large or low mounted gas tanks, because it positions the air cleaner further to the right by 21 mm.

Bates BigFin Covers for CV-Carburetors

Bates BigFin Covers for CV-Carburetors

Give your CV carburetor a fresh look with the ribbed top cover by Bates. The cast-in Bates “B” adorns the front center of the cover.

Fork Crown Covers for CV-Carburetors

Fork Crown Covers for CV-Carburetors

Distinctive aluminum top cover for your CV carb. Sports a finned streamline design and can be mounted in minutes.

Standard Covers for CV-Carburetors

Standard Covers for CV-Carburetors

This solid die-cast top cover replaces the stock black plastic part on CV carburetor. Easy bolt-on installation.

Manifold Adaptors for Dell'Orto,Mikuni and CV Carburetors

Manifold Adaptors for Dell'Orto,Mikuni and CV Carburetors

Rubber adaptors to mount spigot style carbs like Mikuni, Dell‘Orto, Keihin CV, etc. to manifolds with two-bolt flange.

VM Adapter Plate for CV Carburetors

VM Adapter Plate for CV Carburetors

This plate allows installation of CV carburetors on Bendix and Keihin (butterfly) manifolds. Thus you can use them on Knuckleheads, Panheads, Shovelheads, Sportster →1987 and Evo Big Twins →1989. Precisely CNC-machined from billet aluminum, with special O-ring. The adapter plate has a press-fit on the carburetor, optionally using a cold-weld compound. No other gaskets necessary.
Unfortunately, this press-fit cannot be reversed without damage to the parts. This may seem radical, but it guarantees absolute tightness, provided it is properly installed and zero air leaks will influence the bike's performance.

Carburetor Bracket for Evolution CV

Carburetor Bracket for Evolution CV

These kits are designed to support CV-Carburetors on models equipped with the cylinder head crankcase breather system, when mounting custom air cleaners that lack the support.

Socket Head Screw Kits for CV Carburetors

Socket Head Screw Kits for CV Carburetors

Low Speed Mixture Adjuster Screws for CV-Carburetors

Low Speed Mixture Adjuster Screws for CV-Carburetors

Even with an angled screw driver adjusting your Keihin's idle mixture is no fun. Swap your stock adjuster screw againts this knurled head adjuster, and you are at ease: Idle mixture adjustment with just your finger tips!

Dynojet Thunderslide Stage 1 Tuning-Kits

Dynojet Thunderslide Stage 1 Tuning-Kits

The Thunderslide kits contain a specially designed slide made from plastic. The benefits are its extreme light-weight and a faster throttle response.
Compared to the stock part, the cut-out and pressure compensation bores are redefined which adds efficiency and mid-range power, and lowers fuel consumption.

Dynojet Tuning Kits for CV-Carburetors

Dynojet Tuning Kits for CV-Carburetors

Improve the performance of stock 40 mm Keihin CV-Carburetors. These kits contain all necessary jets, needles, springs and a detailed instruction that leads you step-by-step through the carb tuning and modification for maximum performance on stock motors as well as on motors with performance cams and exhausts. More power throughout the complete RPM-range and better throttle response. Especially recommended when you switch to a Custom air cleaner.

Recalibration Kits for CV-Carburetors

Recalibration Kits for CV-Carburetors

High-quality, low priced alternative to our Dynojet kit. Contains the same components, including 5 main jets (1.50 to 1.90) and permits to improve the performance of the stock CV-Carburetor as used from 1989 to 1999 on Evolution Big Twins. Fits carbs with or without accelerator pump.

Kuryakyn Marquis Choke Knobs for CV-Carburetors

Kuryakyn Marquis Choke Knobs for CV-Carburetors

Nice accessory that neatly installs over the stock black plastic knob on all XL 1988-2006 and Big Twins 1990-2006 with CV carbs. It not only looks 100% better, with its knurled edge it is also easier to hold and operate.

PVC Carburetor Vent Lines/Overflow Hoses

PVC Carburetor Vent Lines/Overflow Hoses

Transparent lines which can be used as carburetor vent lines or overflow hoses. They are made from PVC.

Helix PU Carburetor Vent Lines/Overflow Hoses

Helix PU Carburetor Vent Lines/Overflow Hoses

These transparent lines by Helix can be used as carburetor vent lines or overflow hoses. They are made from premium polyurethane with a Shore hardness of 85, which provides for superior resistance against abrasions, kink, tear, oxidation and chemical influences. It has a melting temperature of 188°C and an operating temperature range of -59° to +68°C. This line material will not get hard and stays flexible.

Mounting Brackets CV Carburetor on Shovelhead

Mounting Brackets CV Carburetor on Shovelhead

These brackets allow, in combination with a custom support for Big Twins 1990-1999, for an easy and solid installation of a CV carburetor to Shovelhead engines late 1978-1984. They bolt to the underside of the rocker boxes.
As there are some tolerances in the placement of the threads in the rockerboxes and various manifold adapters on the market,spacers may be required.

Bates Carburetor Support Brackets BT OHV 1936-1984

Bates Carburetor Support Brackets BT OHV 1936-1984

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com