Gasket kit by James Gaskets; for Pushrod covers; fits Evo Sportster 1991-2003; rubber; replaces OEM HD 11190, and 17944-89; gross weight: 20 g

Oil seal by James Gaskets; for Sprocket shaft / Crankcases; fits Dyna and Touring 1999→, Softail 2000→, Sportster 2004-2020, Buell 2004-2009 (exc. 1125); steel / rubber; replaces OEM HD 12068; gross weight: 10 g

O-Ring by James Gaskets; for Pushrod cover top position Twin Cam and Milwaukee-eight 1999→, oil pump Twin Cam 1999→, oil filter mount Dyna 1999-2005 and Touring 1999-2006; rubber; ID x OD: 17 x 24 mm, 3.5 mm thick; replaces OEM HD 11293; gross weight: 1 g

O-Ring by James Gaskets; for Cylinder base; fits Twin Cam 1999→; rubber; ID x OD: 102.5 x 107.5 mm, 2.5 mm thick ; replaces OEM HD 11256; gross weight: 10 g

O-Ring by James Gaskets; for cylinder head dowel pin Twin Cam 88, cylinder base dowel pin all Twin Cam; rubber; ID x OD: 10.4 x 14 mm, 1.8 mm thick; replaces OEM HD 11273; gross weight: 10 g

O-Ring by James Gaskets; for breather bolt, cylinder head: Softail 2002-2007, FLSTFBS 2016, Touring 1999-2007, Dyna 1998-2007; rubber; ID x OD: 14 x 19 mm, 2.5 mm thick; replaces OEM HD 11292; gross weight: 10 g

O-Ring; for Plug; for cam gear support plate; fits Dyna 1999-2005, Softail 2000-2006, Touring 1999-2006; rubber; ID x OD: 6 x 9.8 mm, 1.9 mm thick ; replaces OEM HD 11298; gross weight: 10 g

O-Ring; for Oil pump / Crankcases; fits Twin Cam 1999→; rubber; ID x OD: 9.5 x 14.5 mm, 2.5 mm thick ; replaces OEM HD 11301; gross weight: 10 g

Gasket by James Gaskets; for Gear cover; fits Twin Cam 1999→; paper / silicone; replaces OEM HD 25244-99; gross weight: 10 g

Gasket kit »MLS« by James Gaskets; for Cylinder head / Cylinder base; paper / rubber / steel, steel / PTFE / rubber; nominal bore: 3-7/8 ”; with 0.045 ” head gasket; replaces OEM HD 16787-99, and 11256; gross weight: 140 g

Gasket by James Gaskets; for Rocker cover; fits Dyna and Touring 1999→, Softail 2000→; rubberized steel with silicone seal; position: top; replaces OEM HD 17386-99; gross weight: 40 g

Gasket »Foamet« by James Gaskets; for Tappet guide; fits Twin Cam 1999→; aluminum / rubber / silicone; replaces OEM HD 18635-99A; gross weight: 12 g

Gasket by James Gaskets; for Header pipe / Cylinder head; fits Evolution, Twin Cam and Milwaukee Eight Big Twins 1985→, Evolution Sportster 1986-2020; steel; ID x OD: 42 x 50 mm, 4.5 mm thick; replaces OEM HD 65324-83; gross weight: 4 g

O-Ring by James Gaskets; for Oil filter wing nut BT 1966-1982, XL 1966-1978, Tappet Screen Plug BT late 1970-1984, Check Valve Plug BT late 1978-1998(9), Drain Plugs Dyna 1992→ and Touring 1993→, Drain Plug Transmission and oil tank Softail 2000→, Drain Plug primary housing Dyna 2006→, Softail and Touring 2007→, Drain Plug primary housing and transmission Sportster/Buell 1977→, under fork damper: XL and FX 1971-1972; rubber; ID x OD: 10.8 x 14.4 mm, 1.8 mm thick; replaces OEM HD 11105; gross weight: 1 g

O-Ring by James Gaskets; for Pushrod cover mid position Big Twin late 1979→, Sportster late 1979-1990, filler plug transmission Big Twin 1993-2006 (Dyna only →2005), engine oil dipstick cover top Dyna 1991-1998, front fork air control on valve assembly banjo Touring models 1987-1996; rubber; ID x OD: 17.5 x 22.5 mm, 2.5 mm thick; replaces OEM HD 11132; gross weight: 1 g

O-Ring by James Gaskets; for Fork tube plug/air valve FLT 1984-1992, piston oiling jets Twin Cam engine; rubber; ID x OD: 12.4 x 16 mm, 1.8 mm thick; replaces OEM HD 11140; gross weight: 10 g

O-Ring; for Pushrod covers; fits Big Twin 1984→, Sportster 1986-1990; rubber; position: bottom; ID x OD: 21.5 x 26.8 mm, 2.6 mm thick; replaces OEM HD 11145; gross weight: 1 g

O-Ring by James Gaskets; for Pushrod cover top position Big Twin 1984-1998 (Softail →1999), Sportster 1984-1990, oil pump Twin Cam 88; rubber; ID x OD: 18 x 24 mm, 3.5 mm thick; replaces OEM HD 11157; gross weight: 10 g

O-Ring by James Gaskets; for Cylinder to Head Centering Dowels Big Twin Evolution, Sportster 1986-2007, Buell →2007, Engine Case Halves Centering Dowel Dyna and Touring 1999-2007, Softail 2000-2008, Check Valve XR1200X; rubber; ID x OD: 14.5 x 17.5 mm, 1.5 mm thick; replaces OEM HD 26432-76; gross weight: 2 g

Gasket by James Gaskets; for Manifold / Constant velocity carburetor; fits Big Twin 1990-2006, Sportster 1988-2006; rubber; replaces OEM HD 27002-89; gross weight: 10 g

Gasket by James Gaskets; for Cylinder base; fits Panhead and Shovelhead 1963-1984; front; paper; nominal bore: 3-7/16 ” / 3-1/2 ”; replaces OEM HD 16776-63; gross weight: 10 g

Seal ring; for Manifold flange / Cylinder head; fits Big Twin 1990-2016 (Softail →2017), Sportster 1986-2020; rubber; inner Ø: 45.50 mm; replaces OEM HD 26995-86B, and 26995-86C; gross weight: 10 g