Bendix 38 mm Carburetors
Select variant:

with adjustable main jet


without adjustable main jet; replaces OEM HD 27155-72TB
Price and stock:
Item №
65-599
net price
$884.72
Available
4
Ready for immediate delivery from our Würzburg, Germany warehouse
* Tax free shipping.
- Butterfly carburetor by Zenith
- with adjustable main jet
- cast aluminum / steel, cast finish
- Ø 38 mm
- USA
- gross weight: 690 g
The good old Bendix. Use as stock replacement for all models from 1971–early 76 or to convert later models equipped with Keihin carburetors.
Spare parts:

James Gaskets for Bendix Float Bowl

James Gasket Kits for Bendix Carburetor

Repair Kits for Bendix Carburetors

Seal Washers for Bendix Jets

Throttle Cable Nipples for Models →1975
Accurate reproductions of the throttle lever wire blocks used on all Linkert carburetors. Also fit Tillotson and Bendix carbs. The oversize version is for worn levers.

Adjustable Main Jets for Bendix Carburetors
Adjustable main jet for all Bendix carburetors. Use as stock replacement or to upgrade carburetors without this feature. Requires one thread to be cut .

Replacement Parts for Bendix 38 and 40 mm Carburetors
Accessories:

Bates Manifold Clamp Bolts
Instant period appearance. Add some classic style to your manifold clamps and replace the common socket head bolts with these authentic looking hex head bolts.

Throttle Cable Bracket for Bendix Carburetors

The GasBox Carburetor Support Brackets BT OHV 1936-1984
This carb support bracket is made to support your intake manifold in order to keep your carb up and safely route your gas line keeping it off the cylinders. Will work with most carburetors.

Universal Throttle Cable Brackets
The carburetor is finally adaptered to the bike-projekt, an elegant K-Tech throttle housing is gracing the handlebar and … oh sh## … where on the carb can I fix the cable? On any single stud or bolt, this angled bracket with cable clamp will fix the problem.

Cannonball 2-Bolt Manifolds for Flatheads
Direct bolt-on manifold for Linkert to Bendix carburetor conversions on all U and WLDR Flatheads. Also accepts Keihin (butterfly) carburetors.

The GasBox Carburetor Support Brackets Ironhead XL
This Ironhead Sportster carb support bracket is made to bolt to your intake manifold and front intake tappet guide bolt. Will work with any carburetor.

S&S Rubberband Manifold Clamps
High quality intake manifold clamps to replace the flimsy and troublesome stock clamps. They use a curved 10-24 threaded T-bolt with plated steel aircraft hex locknut.

Custom O-Ring Manifold Clamps
Economically priced manifold clamps. Solid two-piece construction complete.

Choke Cables for Bendix Carburetors

Bendix/Keihin Air Cleaner Mounting Kit
This lock plate was stock on 1984-1985 models but is very useful to securely mount any air cleaner on bikes with Bendix and Keihin butterfly carburetors.

Bates Adapter for Linkert Carb Covers on Bendix
The selection of carb covers for Linkert carburetors is pretty extensive and many of them look nicely at home on other carbs, too. With this little adapter plate you can make this happen in no time. Precisely CNC-machined from billet for a hassle-free installation....

Bates O-Ring Manifold Clamps
These manifold clamps are cast from brass and precision-machined. The groove for the O-ring is exactly shaped and positioned where it is supposed to be for a perfect seal. Top notch quality! Delivered with a set of classic looking hex head screws.

Throttle Cables for FL 1975, FX 1974-1975, XLCH 1974-early 1976 (Bendix Carb)

Throttle Cables for Throttle Grip Sets →1980 with Bendix/S&S Super B

Throttle Cables for Throttle Grip Sets 1981-1995 with Bendix/S&S Super B

Bates Idle Adjuster
Idle adjustment of S&S and Bendix carbs can be annoying when your bike is equipped with Fat Bob gas tanks, especially the 5 gal versions. The Bates adjuster solves this problem once and for all. It features a flexible shaft and a large adjuster knob with knurled edge which allows carb adjustment without a screwdriver and as fast as you can say "****! I forgot my ******* tool roll in the garage!"

Thunderjet Third Fuel Circuit
Third fuel circuit for Bendix, Tillotson, Keihin (except CV) and S&S carburetors. It has a built-in air correction system that permanently solves the problem of poor mid-range and/or lean top end performance. This system operates over a wide range of altitude and atmospheric conditions and is available in blue, red or black anodized finish.

Shovelhead Manifolds
Manifolds for all Shovelhead Big Twin and Ironhead Sportster engines. They accept Tillotson, Bendix and butterfly Keihin carbs.

S&S O-Ring Manifold Clamps
High quality intake manifold clamps to replace the flimsy and troublesome stock clamps. They use a curved 10-24 threaded T-bolt with plated steel aircraft hex locknut.

Linkert Style Air Cleaner
Air cleaner styled after the original Linkert part used from 1941–1965.

Bendix Style Oval Air Cleaner
This oval air cleaner was Original Equipment on many models since 1967 and is still one of the most beautiful HD air cleaners. Perfect for your original 60s and 70s style Harley restauration. Fits all Tillotson, Bendix and Keihin carburetors (except CV).

Adjustable Main Jets for Bendix Carburetors
Adjustable main jet for all Bendix carburetors. Use as stock replacement or to upgrade carburetors without this feature. Requires one thread to be cut .

O-Ring Manifold Clamps

Aircraft Style O-Ring Manifold Clamps
Aircraft-quality manifold clamps which provide a tight and strong fixation of the carburetor without extra support.

Rubberband Manifold Clamps

Brass Rubberband Manifold Clamps

Aircraft Style Rubberband Manifold Clamps
Aircraft-quality manifold clamps for Shovelhead Big Twin and Sportster models 1979-85.

Custom Rubberband Manifold Clamps
Economically priced manifold clamps. Solid two-piece construction complete.

Have any questions?
Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com