Air Cleaner Adapters and Accessories

Adapter for Bell Air Horn Carburetor Cover

more …

Bates Adapter for Custom Air Cleaners on Schebler and Linkert Carburetors

The choice of Custom air cleaners for Linkert carburetors is limited to say the least. This smart little adapter from machined aluminum allows for the installation of almost all Custom air cleaners and carb covers. W&W-checked bolt patterns include those of Bendix, Keihin, Keihin CV, and Hypercharger air cleaners. Fits all M-series Linkert and Schebler DLX carburetors.

more …

Bates Adapter for Bendix Air Cleaners on S&S Super E/G Carbs

This adapter allows for the installation of Bendix, Keihin (Butterfly) and Super B type air cleaners (with flat base plate), covers and air horns on S&S Super E/G carburators.

more …

Bates Adapter for Linkert Carb Covers on S&S Super E/G

The selection of carb covers for Linkert carburetors is pretty extensive and many of them look nicely at home on other carbs, too. With this little adapter plate you can make this happen in no time. Precisely CNC-machined from billet for a hassle-free installation.
Since the bolt circle for Linkert carbs is smaller the adapter somewhat restricts the air intake. All you performance nuts should consider this.

more …

Bates Adapter for Linkert Carb Covers on S&S L-Series

The selection of carb covers for Linkert carburetors is pretty extensive and many of them look nicely at home on other carbs, too. With this little adapter plate you can make this happen in no time. Precisely CNC-machined from billet for a hassle-free installation.
Since the bolt circle for Linkert carbs is smaller the adapter somewhat restricts the air intake. All you performance nuts should consider this.

more …

Bates Adapter for Linkert Carb Covers on S&S Super B

The selection of carb covers for Linkert carburetors is pretty extensive and many of them look nicely at home on other carbs, too. With this little adapter plate you can make this happen in no time. Precisely CNC-machined from billet for a hassle-free installation.
Since the bolt circle for Linkert carbs is smaller the adapter somewhat restricts the air intake. All you performance nuts should consider this.

more …

Bates Adapter for Oval Air Cleaners on CV Carburetors

This adapter allows for the installation of OEM or aftermarket air cleaners with recessed backing plate on Keihin CV carburetors. At least that’s what it is intended for, but of course, you can mount any air cleaner, carb cover or air horn with a Tillotson, Bendix or Keihin bolt pattern. It is also useful with large or low mounted gas tanks, because it positions the air cleaner further to the right by 21 mm.

more …

Bates Adapter for Oval Air Cleaners on S&S Super E/G Carbs

Add some classic factory style to your S&S Super E or G carburetor. This adapter allows for a quick and clean installation of OEM or aftermarket air cleaners with recessed backing plate. At least that’s what it is intended for, but of course you can mount any air cleaner, carb cover or air horn with a Tillotson, Bendix or Keihin (exc. CV) bolt pattern to your Super E/G with it.

more …

Bates Custom Air Cleaner Spacer for CV Carburetors

To mount custom air cleaners with a flat backing plate on CV carburetors, the air filter backing plate must move further out, otherwise it will be in contact with the vacuum chamber. These spacers provide the required distance.

more …

Bates Spacer for CV Air Cleaners

If you need additional room between your air cleaner and the engine or fuel tank, these spacers will do the trick. Compatible with almost any CV bolt pattern air cleaner.

more …

NSW Adapter for S&S Two Throat Carburetors

This precisely machined adapter allows for the installation of small air horns or air cleaners on S&S Two Throat carburetors.

more …

Fork S.U. Adapter for S&S Super E/G Air Cleaners

This adapter allows installation of all air cleaners and carb covers with S&S Super E/G bolt pattern on S.U. carburetors.

more …

Adapter CV for Fork Carburetor Cover

more …

Fork Velocity Lip

Enhances the intake flow and mounts between carb and intake cover.

more …

Bracket for Hypercharger

more …

Breather Kit for Hypercharger

more …

Replacement Nipple for Hypercharger Breather Kit

more …

Stinger Covers for Hypercharger Air Cleaners

Designed specifically to maximize airflow into the carburetor or throttle body, the Stinger’s two large raised scoops channel air through a high-flow foam filter element. This is an effective way to increase air flow in any standard Hypercharger. Easy four bolt replacement of any standard trap door.

more …

S&S Breather Conversion Kits

Improved breather hardware to retrofit S&S Super E air cleaners. Advantages over the earlier system are in that the fittings and hoses plug on the cylinder head behind the backing plate and do not need to be removed for service on filter or carburetor. Coated washers are used instead of O-rings which are much more durable and seal better to prevent leaks.

more …

Rain Sock for RSD Air Cleaners

When you find yourself in a sudden downpour, help prevent water from entering your engine with this rain sock. Stash it in a backpack or pocket and when the skies open, stretch it over your air cleaner for quick & easy roadside installation, no tools required. Made from durable polyester, treated using a proprietary hydrophobic process to repel water. Uniform micron openings allows air in while keeping debris and water out.

more …

Rain Sock for RSD Air Cleaners Internal

If you are doing a lot of wet weather riding the Internally Mounted Rain Sock is a good option. While not a necessity for riding in the rain with a RSD Air Cleaner, it can help reduce filter saturation. It installs under the air cleanr cover. Made from durable polyester, treated using a proprietary hydrophobic process to repel water. Uniform micron openings allows air in while keeping debris and water out. Dyno & flow bench proven to maintain current performance.

more …

Rain Sock for Air Horns

Pre-filter/rain sock which fits many velocity stacks. Its uniform micron openings allow air in while keeping debris and water out.

more …

Trap Doors for Hypercharger Standard

more …

Bates Trim for Bendix Style Oval Air Cleaner

This contrasted insert will add some 1970’s classic factory style to your oval air cleaner. Simply mounts with the two cover screws.

more …

Active Airbox Bypass

If the original air filter on some models is replaced with a high flow system, as is desirable when installing a Power Commander module, for example, the check engine light will be on continuously. This bypass connector simulates the presence of the airbox solenoid, and the MIL indicator light remains off. Simply plugs into the harness in place of the solenoid connector.

more …

Carburetor and Injection - Carburetor, Manifold and Air Cleaner Mounts