A Biker’s Work is never done
Low Ridin' Prices
Environment and Sustainability
Generators and Corresponding Regulators
32E Type Generators
End Covers for 32E Type Generator
Cover for 32E Type Generator
This stock replacement strap is mandatory for the secure mounting of your 32E generator.
Generator Strap Nut and Washer
Accurate reproductions of the convex washer and tensioner nut for the 32E generator strap.
Generator Shims and Strap Hardware
Accurate reproductions of the shims and strap hardware for the 32E generator. The shims are used to establish the correct gear engagement of the generator gears.
Screw Kits for 32E Generator
Cut-Out Relays Solid State
Matching "relays" for 1926-1957 generators with modern solid state technology, eliminating any coils and moving contacts. No visible differences to OEM stuff from the outside.
Delco Remy Relay Covers
Relay Brackets OHV
Accurate reproductions of the stock brackets for Delco relays.
Cut-Out Relay Eliminator Solid State
A diode that eliminates the mechanical cut-out relay. It is designed for use with 6V 3-brush generators 1932-1957. Simply installs between generator terminal and battery.
Samwel 12V Conversion Kits for 32E Generators
Conversion kit to upgrade stock 32E generators from 6V to 12V. Benefits are more power, stronger spark and better lighting. Each kit comprises:
anchor, fields, bearings, gaskets,
Wrecking Crew Generator Block-Off Plates with Spark Plug Mounts
Back in the days it was common to carry a set of spare spark plugs easily accessible on the motorcycle. Thus in case of a necessary change you didn’t have to dig them up deep from the bottom of your saddlebags. These block-off plates with two threaded sockets derive from the race track and are intended for magneto equipped bikes without generator. They simply install in lieu of your genny and bolt down with the stock hardware.
VCP Relay Boss Repair Block
Weld-on repair block for engine cases that have the original relay mount shaved off, which was often done for magneto use or for a "clean" look.