Replacement Parts

 Shop Fork Springer Forks Custom

Replacement Parts



Replacement Parts

Custom Rocker Shaft Sets for Springer Forks

Custom Rocker Shaft Sets for Springer Forks

These Rocker Shaft Sets replace the original rocker shafts with fender mounts with a version without a mount for the front fender. The existing rockers can be reused.
A simple way to change the look of a classic Springer fork without replacing the rockers or the complete fork. Particularly interesting for choppers and custom Springer conversions where no fender mount is required.
Also suitable as replacement parts for our chopper Springer forks.

Spring Kits for I-Beam and Classic Springer Forks

Spring Kits for I-Beam and Classic Springer Forks

The factory equipped Solo machines with upper and lower buffer springs, except for the 1946-49 model years which only had lower buffer springs. These short buffer springs have no suspenion function but solely prevent bottoming out of the fork. They have a C-shaped arc against rattling.
WLC (Canadian Army), Servi-car and Big Twins with sidecars came with lower inner cushion springs to compensate for the higher weight or severe duty.

Springs for I-Beam and Classic Springer Forks

Springs for I-Beam and Classic Springer Forks

Spring Guidance

Spring Guidance

The proper function of front suspensions on older Harley-Davidson models, also known as Cushion Fork or Springer Fork, depends on the condition of guide rods, guide bushings, and small components such as leaf springs and slider blocks. If these parts have the correct dimensions and are properly matched to each other, these spring forks can also perform satisfactorily.

Sets of Rockers for Classic and I-Beam Springer Forks

Sets of Rockers for Classic and I-Beam Springer Forks

Sets of Rockers for ≥+12” Springer Forks

Sets of Rockers for ≥+12” Springer Forks

Repair Kits for Rockers

Repair Kits for Rockers

Repair kits with shafts, bushings nuts and washer for the restoration of Springer fork rockers. The selection includes complete kits for a set of two rockers and kits for individual rocker shafts.

The Cyclery Repair Bushings for Rockers

The Cyclery Repair Bushings for Rockers

A second life is possible for your worn down rocker shafts. These repair bushings have smaller than stock IDs so you can ream them individually to size after you dressed your oval shafts on a lathe back to a perfectly round condition.

Replacement Parts for Rockers

Replacement Parts for Rockers

Grease Nipples 1939→

Grease Nipples 1939→

For Star hubs, Springer rockers, seat posts and many other applications. Sold each.

Colony Grease Nipples 1939→

Colony Grease Nipples 1939→

Accurate reproductions of the grease fittings for Star hubs, Springer rockers and many other applications. Sold as 6 packs.

Stock replacement fork stems for original Springer forks and our Classic Springer, Cannonball I-Beam and Hillclimb forks. They feature the correct length and inside outside threads. Must be pressed and brazed into lower crown.

Fork Stems Custom

Fork Stems Custom

Universal fork stem for original or Custom Springer forks. They do not feature the inside thread for the stock steering damper.

Phone Service Operator Illustration

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com