We use cookies for analytics, advertising and to improve our site. To find out more see our privacy policy.
>
Shop
>
Tank
>
Tanks
>
for Singles and 45”/750cc →1936
>
The Cyclery Gas and Oil Tanks for Singles and 45”/750cc Flathead 1930-1936

The Cyclery Gas and Oil Tanks for Singles and 45”/750cc Flathead 1930-1936

Description
Facts

Nice reproductions of the fuel and oil tank combinations for 45”/750 cc D models and C model Singles Made from soft soldered steel, with all stock brass bungs, brackets and fittings, just like the originals.

All gas tanks purchased from W&W Cycles are delivered unpainted and unsealed. BEFORE the paint job and final installation please observe the following:

  • Conduct a probationary installation. Make sure that the gas tank rests stress-free on the frame. See the W&W selection of spacers and shims. Don’t forget to test fit petcocks and fuel/oil lines, too.
  • Timely to painting have a professional pressure test performed. W&W Cycles cannot warrant leakage on painted gas tanks.
  • To avoid corrosion always fill your tank to the max during longer downtimes or seal it on the inside.

For obvious reasons both the probationary installation and a timley pressure test connot be executed at W&W premises. These have to be done locally.

  • sheet steel
  • 15 l
  • required gas cap: screw-in 1916-1936
  • required petcock: 1/8” NPT
Item №
Version
net price*
unit
Availability in warehouse Germany
The Cyclery Gas and Oil Tanks for Singles and 45”/750cc Flathead 1930-1936
35-278
fits 45”/750 cc D models, C model Singles 1930-1931; replaces OEM 3501-30A, and 3502-30A
$1,223.26
set
Go to article
The Cyclery Gas and Oil Tanks for Singles and 45”/750cc Flathead 1930-1936
35-283
fits 45”/750 cc R models, C model Singles 1932-1936; replaces OEM 3501-32A, and 3502-32
$1,223.26
set
Go to article
* United States of America: Tax free shipping. Please check your local import fees.

Accessories:

1916-1939 Fuel Valves

1916-1939 Fuel Valves

Detailed reproductions of the gas shut off valves used on Harley models thru 1939.
more …
OEM Style 1916-1936 Oil and Gas Tank Caps

OEM Style 1916-1936 Oil and Gas Tank Caps

Reproductions of the oil and gas tank caps as used on all 1916-1936 models.
more …
The Cyclery Hand Oil Pumps

The Cyclery Hand Oil Pumps

Reproductions of the hand oil pump plungers and the oil pump valve.
more …

See also:

PanAm Oil Slide

PanAm Oil Slide

Oil change without a mess! This rubberized aluminum alloy sheet allows you to form an individual funnel or trough to direct your waste oil from the hard-to-reach oil tank drain hole or oil filter plate to any suitable container. Of course, you can also use it to fill fresh oil into your tank. Tapered at one end so it can be shaped to reach tight spots. You can reshape and use it a thousand times and on different bikes. With suspension eye so you can hang it up for drip-off. Easy to clean.
more …
Tankdoc Gas Tank Restoration Kits

Tankdoc Gas Tank Restoration Kits

A complete system by the German company Busch to restore common motorcycle gas tanks. Cleaner, rust remover and sealant - the set contains them all. The high performance components will clean out even bad cases of corrosion and will dependably seal hairline cracks and small holes. Within 8-12 hours the sealant can be applied repeatedly which extends sealing mileage by up to 100%.
more …
KRM Tank Cleaner and Sealer

KRM Tank Cleaner and Sealer

Formerly Kreem, now KRM: Recommended for older gas tanks which are rusty or dirty on the inside. Tank prep A & B remove corrosion and prepare the surface for the KRM Sealer. The Sealer cures hairline cracks (not holes!) and its tough white skin permanently seals the tank and permanently protects it against rust. One bottle contains enough sealer for tanks up to 13 liters capacity.
more …

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com