

>

Capacities and Fluid Requirements

>

Transmission Filling Quantities



Transmission Filling Quantities

All data without guarantee.

PanAm Oil Slide

PanAm Oil Slide

Oil change without a mess! This rubberized aluminum alloy sheet allows you to form an individual funnel or trough to direct your waste oil from the hard-to-reach oil tank drain hole or oil filter plate to any suitable container. Of course, you can also use it to fill fresh oil into your tank. Tapered at one end so it can be shaped to reach tight spots. You can reshape and use it a thousand times and on different bikes. With suspension eye so you can hang it up for drip-off. Easy to clean.

This oil pad soaks up to 2 l of fluid, i.e. oil, gas, etc. A reinforced top and an anti-slip foil on the bottom side make the PanAm oil pad a useful helper in the workshop, garage or living room.

PanAm Clean-Funnel

PanAm Clean-Funnel

A good funnel is a must have in any workshop when it’s time for an oil change or a refill. The annoying part of these jobs was to stow away the oil dripping funnel into a dark corner where you would find it a few months later contaminated inside-outside with dust, bugs and other debris. The PanAm funnel puts an end to this problem because it features screw-on caps at the top and bottom which can be removed for action and which keep the inside of your funnel perfectly clean during storage. The flexible spout makes it more versatile as it allows to direct the funnel tip in tight spots.

PanAm Oil Drain Pan and Containers

PanAm Oil Drain Pan and Containers

This is a combination of drain pan and waste oil container, which should be basic equipment for every workshop or garage. It will make an oil change as easy as pie and environmentally sound.

Low-Profile Oil Drain Pan and Containers

Reduce the mess and cleanup required when changing the fluids on your motorcycle. This king size drain pan is designed specifically for use with motorcycles. The low-profile design fits easily under lowered motorcycles and slips beneath rigid frame bikes even when on the side stand. The 10-quart capacity will capture 2 engine oil changes or the complete drain fluids (engine oil, primary and transmission) from one motorcycle. This drain pan is large enough to catch the oil from the entire length of the primary and is sized to hold and drain an inverted primary cover. It features a raised hardware corral, a filter drain surface and a pressure vent hole to prevent oil burping. The drained waste oil is sealed safely inside the pan with gasketed caps and plugs. Convenient carrying handle simplifies transport to an approved waste oil facility.

PanAm Oil SAE 50

PanAm Oil SAE 50

Our traditional single grade lubricant for engine and transmission for heavy thermal and shear loads. Complies with H-D recommendations up to 1984 for Big Twins and Sportsters up to 1981. This high performance lubricant complies with API CF.

PanAm Oil SAE 60

PanAm Oil SAE 60

Seems it never rains in Mexico … PanAm SAE60 - the official oil of the El Diablo Run 2019 on Baja California, where temperatures above 30 degrees are standard and requirements for the engine lubricants are demanding. But thanks to global warming in Europe, too, the thermometers literally point far north in summer. For our old air-cooled machines this spells significantly more strain, which has to be considered when selecting your engine oil. PanAm60, developed by PanAm Oils in Ohio/USA, meets the increasing demands of vintage and classic bikes, today and in the future.

PanAm Oil SAE 80W-90

PanAm Oil SAE 80W-90

Our lubricant for Big Twin transmissions. This high performance lubricant complies with API GL-4.

PanAm Oil SAE 85W-90

PanAm Oil SAE 85W-90

This lubricant is recommended for Sportsters, where transmission and primary drive share one lubricant. This high performance lubricant complies with API GL-4.

PanAm Full-Synth Oil SAE 20W-50

PanAm Full-Synth Oil SAE 20W-50

Our premium multigrade engine lubricant. 100% synthetic. For unrestricted usage in engine, wet clutches, primary drives and transmissions. Better engine protection, more positive clutch action and smoother shifting. Less friction and reduced wear. This high performance lubricant complies with API SL.