This compilation flat tip screwdrvers is designed specifically to serve the needs of both professional and hobbyist mechanics. Precision made for a snug fit between the driver and fastener which minimizes the potential for damage to the screw head when torque is applied. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 6-piece set comprises the following blade sizes:

• SS3 = 0.8 x 4 x 80 mm
• SS4 = 1 x 5.8 x 81 mm
• SS5 = 1.2 x 6 x 150 mm
• N3 = 1.3 x 7.5 x 80 mm
• SS6 = 1.2 x 7.5 x 132 mm
• SS7 = 1.3 x 9 x 182 mm

Tools for a thousand uses which will make you soon ask yourself how you had survived before you added them to your toolbox. Clean grease and dirt from dark corners of your engine, tranny, wheel hubs etc., pull lock rings from shafts, catch that lockwasher that just dropped between cooling fins, or you name it. This is a finely crafted set, made with chromium-vanadium 8650 alloy steel. Each hook and pick is of 1/8” diameter, 78 mm long and carefully pressed into the hardwood handle. The handles are hot stamped with the appropriate size and angle of the hook and pick.

The 6-piece set comprises the following blades:

• straight scribe
• 30° bent pick
• 90° bent pick
• double bend pick
• 180° loop pick
• 180° hook pick

A set of Flat Tip and Phillips screwdrivers designed to serve the needs of the home do-it-yourself mechanic who is looking for a quality set of screwdrivers that will cover a broad range of needs. It consists of three Phillips and three matching slotted tips. Each screwdriver is constructed of USA 8650 Chromium-Vanadium steel alloy blades, precision made for a snug fit between the driver and fastener that minimizes the potential for damage to the screw head when torque is applied. The handles are turned from Maine hardwood and protected with a nicely stained finish, topped off with a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time.
The 6-piece set comprises the following blade sizes:

• P0 = size 0, blade length 77 mm
• P1 = size 1, blade length 80.5 mm
• P2 = size 2, blade length 79 mm
• G3 = 1 x 4, blade length 80 mm
• H3 = 1 x 5.5, blade length 81 mm
• N3 = 1.3 x 7.5, blade length 80 mm

For meticulous work on detailed projects. These punches are made from high carbon molybendenum tool steel and properly heat treated with tempered striking end. They are also centerless ground for complete accuracy and we have incorporated a reverse taper from tip of punch to help prevent punch from sticking in the work piece. The punches are manufactured from hex stock steel vs. round which helps stabilize punch from rolling away from user.
The 7-piece set comprises the following punches:

• center-punch 3.5 mm, length 107 mm
• tapered punch 1/16”, length 114.5 mm
• punch 1/16”, length 108.5 mm
• punch 5/64”, length 114.5 mm
• punch 3/32”, length 121 mm
• punch 1/8”, length 127 mm
• punch 5/32”, length 134 mm

This pin punch set is made with utmost precision from high quality CDA 360 hex brass rod extruded in a mill in the USA and beautifully polished. They are machine turned and designed for critical work were non-marring and non-sparking are of importance. Carefully made to drive pins or to gently move steel objects.
The 8-piece set comprises the following punches:

• punch 1/16”
• punch 3/32”
• punch 1/8”
• punch 5/32”
• punch 3/16”
• punch 7/32”
• punch 1/4”
• punch 5/16”

Classic Harleys well into the 1960s feature lots of slotted screws on engine, transmisison, primary etc. which you don´t want to tighten or loosen with a cheap screwdriver. It will mar the slots in no time and make you look a poor mechanic. This special edition The Cyclery screwdriver set includes the exact size screwdriver for most slotted screws you find on older H-D models. They feature hollow ground tips to perfectly fit the respective slot, avoiding damages and keeping your expensive hardware in good shape. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these screwdrivers provide that great wood handle feel that only gets better with time. Classy tools for classic bikes - an ideal combination.
The 6-piece set comprises the following blade sizes:

• #1 = 1.0 x 4.7 x 160 mm
• #2 = 1.0 x 6.0 x 183 mm
• #3 = 1.2 x 6.0 x 205 mm
• #4 = 1.3 x 7.0 x 209 mm
• #5 = 1.4 x 9.3 x 168 mm
• #6 = 1.7 x 9.3 x 272 mm

All wearers of glasses are familiar with the problem of eye protection while grinding, hammering, cleaning, etc. and still have a sharp and clear vision. Large face shields, bulky goggles or similar devices were the usual solutions. With Varionet Safety Pro Glasses you can avoid these cumbersome kludges because they will protect you while you work AND provide you with a clear vision. They feature unifocal optical lenses which are available in different corrections for your individual needs. The higher value of the indicated diopters are specified for near range vision. Further features are antifog and antiscratch coatings for the lenses and adjustable temples (length 140-150 mm and angle).

The M-Pact delivers full-coverage hand protection with a sonic welded thermoplastic rubber knuckle guard and dedicated finger guards that shield the top of your hand from unexpected impact and abrasion injuries. The dual-layer internal fingertip construction reinforces high wear areas of the thumb and index finger for improved abrasion resistance, while the embossed and textured fingertip pattern provides grip where you need it most. High-impact XRD padding in the palm reduces shock and vibration associated with hand tools.

Since 1923 the Estwing family manufactures hammers and axes in Rockford, Illinois. The product lines which leave the facility there offer the best value money can buy. Typical characteristic for Estwing hammers is that head and handle are forged in one piece. You simply can´t break them and they will last forever. Another distinct feature is the beautiful leather grip, which greatly isolates, provides a non-slip surface (even when wet) and gives utmost comfort. Estwing products are a once-in-a-lifetime purchase. It is good that things like these are still available.

Work gloves made from durable and flexible cotton blend fabric with rubberized palms for a sure grip. One size fits all.