The Cannonball Clutch Drive electric start kit for rigid frame Big Twins converts your classic kickstart-only motorcycle to electric start. After installation you just push the button or turn the key and your old Flathead, Knucklehead or Panhead will roar to life instantly. Another good thing with the CB starter kit is that it is almost invisible. The overall appearance of the motorcycle does not change at all and from 2 meters away you will have a hard time to spot anything. Primary housing, oil tank, rear fender - all can be retained, although a bit modified. The transmission with its stock kickstarter stays untouched. The kit includes everything needed for the conversion except for the battery, wires and starter button/switch, which must be purchased separately. If the bike is still equipped with the early stock 6V charging system you will have to convert this to 12 V, which means a suitable generator, regulator, coil and lamps need to be fitted. Detailed, step-by-step instructions guide through the installation, which is straightforward but which should be left to an experienced mechanic with fully equipped workshop.The kits are intended for the use with stock clutch and primary chain drive.
W&W recommends the use of Antigravity 12-cell or 16-cell batteries.Legal protection of registered designs by Deutsches Patent- und Markenamt DE 20 2016 104 454 U1 and US Patent US 2018/0045161A1.
- fits rigid frame 4-speed Big Twins
- 2.0 kW
- The Netherlands
Cycle Electric Low Voltage Regulators
Cannonball Heavy Duty Transmission Base Plates
Bates Kill Bill Battery Switches
After installation you have two options:
- use your Kill Bill Switch like an ignition switch. Half a turn out and the current is interrupted.
- use your Kill Bill Switch as protection from manipulation and theft. When you leave your bike remove the thumb screw and thus disconnect the battery from the electrical system.
Have any questions?
Our service team will be glad to help out: Mondays - Thursdays 09:00-16:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: email@example.com