Ball bearing; for Wheel hub / Front wheel; with Kustom Tech Mini Drum Brake; ID x OD: 3/4 x 1-5/8”, 7/16” wide; gross weight: 62 g

Mini front drum brake for choppers and other stripped-down bikes which due to its small size develops only moderate braking power. The drum is made from cast iron, a material with a high coefficient of friction. Circumferential cooling fins help to dissipate heat and yield a nostalgic look. The 130 mm inside diameter of the drum is CNC-machined to guarantee a perfect fit of the brake shoes. The two side covers are made from aluminum. Requires special spokes which are also available.

Spoke sets for Kustom Tech front Mini drum brake hubs.

Tire »Firestone Boardtrack Rib« by Coker Tire; front or rear; 3.00-21 57S; tube-type; fits on rims: 1.60 - 2.15; DOT approved, E4 approved; gross weight: 4.13 kg

Tire »Speedmaster Mk II« by Avon Tyres; front; 3.00-21 57S; tube-type; fits on rims: 1.60 - 2.15; DOT approved, E11 approved; gross weight: 3.4 kg

Chafing strip; for center valve; rubber; width: 24 mm; Ø 21”; gross weight: 50 g

When working with a 17 mm wheel axle in a 19 mm environment these reducer bushings are very useful. Can be inserted in wheel bearings, Springer fork rockers, chain tensioners, etc.

Fumbling the tube valve through its hole in the wheel rim can be a real pain. This smart tool makes the job a lot easier with its 21 cm cable and "fishing hook". Just route the cable through the rim hole and attach its threaded tip to the valve core. Now you can pull the core through the rim without pinching your fingers or damaging the threads. With valve remover inside the handle.