VG offers a wide range of spare and repair parts for Big Twin 4-speed frames from 1936-1984. With these, chopped or damaged frames can be restored to their original condition or repaired. Great thing.

Authentic reproductions of the original seat post bushings as used durnig the years 1930-1984. Big Twin 1936 - 1957 bushings are available with diffferent IDs for non-OEM seat posts.

Complete kits for the restoration of ball bearing type head bearings.

If you’re serious about wrenching your Harley, you’ll always be looking for that special part that makes all the difference. Introducing the legendary Mag Wheel.
When in the 60s car drag racing started to move from being a pastime of a few aficionados to serious motor sport, equipment got ever more important. Among other things lightweight and truly round wheels capable of taking hard loads got popular. And there it was, the magical wheel, the dragster front wheel, cast from magnesium alloy. It was called mag wheel. Not long, and the first chopper jocks tried to bolt these wheels to their rides. A favorite ever since: the 12 spoke variety.
The mag wheels of yore with their respective sizes of 15” and 18” are extremely rare by now and about as easy to find as an Ironhead Sportster that starts on the first kick. Even if one of those beauties can be unearthed, it should be clear that time has never stopped nibbling away at the metal — and the task of making them compatible with Harley brakes and axles is another story.
That’s why W&W had the Cannonball MAG-12 wheels cast using the latest technology and state-of-the-art aluminum alloys which guarantee long-term trouble-free service. The hub design was changed, too, in that it accepts special adapters which allow for the installation of common H-D drum and disc brake systems.
The Cannonball MAG-12 takes its styling cues from the originals, but is certified to take loads of 350 kg per wheel, and engineered to be compatible with a variety of Harley brake and sprocket setups. The available sizes of 16” and 19” give a wide scope of application for that next custom project.
Choose from wheels with a barrel polished or MAG finish. For the latter the barrel polished wheels are finely bead-blasted to achieve a dull magnesium-like appearance.

These are the wheels to replace the worn or missing stock part on your Knucklehead, Flathead or Panhead. They look just like they came from the factory in that era with black hub and rim as well as cad-plated spokes. Assembled with 1940-1966 type star hub with needle bearings. Stock axles and brakes will fit.

These are the wheels to replace the worn or missing stock part on your Knucklehead, Flathead or Panhead. They look just like they came from the factory in that era with black hub and rim as well as cad-plated spokes. The star hub is compatible with original axles and stock brakes. The icing on the cake is the correct Kelsey-Hayes (KHW) rim stamping.

Selection of repair parts for stock or similar rigid frames. Very useful when putting that old stripped chopper frame back to factory specs.

Once upon a time when there weren’t any custom parts you could buy from your local shop, the VL fork was a very popular item because it made your Knuckle or Panhead bobber different from the next guy’s scooter. Besides you gained half an inch of length compared to 1936-up Springer forks for improved ground clearance and a more stretched look. Now it’s time to revive those days of the golden 40’s and 50’s with the Cannonball version of H-D’s VL type fork.
Manufactured just like the original, which means I-beams and connecting braces are drop forged on a huge 10 meter forge hammer. This is the only procedure that guarantees these components stand up to the job.
The problems with installing the OEM fork were the large fork stem and the handlebar mounting so the Cannonball fork is modified here. It features a Ø1” fork stem that works with the included centering collar for 1936-up ball bearings. Moreover the stem also features two Ø1” bearing seats for the use of Big Twin tapered roller bearings without any modifications. The leg tops accept the 36-up Springer inline handlebars. This makes installation a snap compared to the original counterpart.
Certificate of stability for 4-speed Big Twins thru 1986. Length is measured from axle center line to seat of lower steering head bearing.
Although these Custom forks are intended for 1936-1957 rigid frame Big Twins they can be mounted with later frames, too, provided you have/install matching frame head beariings. The builder has to consider rake, trail, overall chassis geometry, brake function, etc.

Complete and accurate reproduction of the classic H-D Springer fork as used by the factory on Big Twins 1936-49 and on 45” models from 1941–57. Manufactured just like back in the good old times, i.e. with forged legs and connecting components, which makes them equal to the original counterpart concerning stability and service life.
Use these top-quality forks as stock replacement for your restauration or as a part of your chopper or bobber project-bike.

• All brackets for brake anchor, front fender and ride control are there and just like stock.
• The dimensions of our standard forks are exactly the same as for the original Springer forks (48,5 cm = 19” from center of wheel axle to lower neck bearing seat).
• The "Builder" versions come unassembled with bare rigid and spring forks, chrome or black springs and black rockers.

Length is measured from axle center line to seat of lower steering head bearing.

Racing style gas tanks for Big Twins shaped after the legendary WR model tanks of the late forties and early fifties. The beautiful narrow design and excellent European craftsmanship really stand out in the crowd. Each set is completely handmade by experts. Unlike the original WR pattern these tanks are supposed to contain gas in both halves.
To avoid an unsightly gap between engine and gas tanks our WR Style tanks are model specific and sit close to the motor which looks purpose-built instead of universal.