Prism Supply Co.

The part is mounted, instead of the solenoid cover, with three screws on the starter and complety replaces the electrical starter circuit. Moving the lever to the right (in the direction of travel!) causes the starter pinion to engage in the starter clutch and closes the contact for the starter motor. A spring on the lever prevents it from becoming loose. Fits Big Twins and Sportsters, but may need to be relocated or modified depending on exhaust system.

A modern version of the old style chopper taillight called The Box. It is equipped with a dual function LED cluster that acts as both brake and running light. The housing is made of billet aluminum and will stand up to years of hard road use. Two back studs make installation a snap.

Custom battery carrier that holds the battery securely and safely in the frame. Specially made for 4-Cell Antigravity batteries. Laser cut from 3mm thick stainless steel plate, so it will probably last forever.

A clean and and unobtrusive appearance are the decisive design features of this throttle grip by Prism Supply. The ingenious pulling mechanism consisting of a chain and carriage, allow for precise linear pulling actuation. Just a 90° twist will fully open your throttle (27 mm cable pull at the carb end). The clamp, polished to a high gloss, as well as the gas handle sleeve are made of aluminium. Suitable for all handlebars with 1" Ø and designed for all gas cables with snap ring (Ø 5/16”, 1996→). Throttle lock screw and grips must be ordered separately.

These transparent covers for Prism Supply Quarter Turn Throttle Grips provide clear view on the ingenious pulling mechanism consisting of a chain and carriage. Delivered with mounting screw.

Custom shift knobs with distinctive design which fit all hand shift levers with 3/8”-24 thread.

These cleanly manufactured discreet brake pedals with pre-assembled mounting plates bolt directly to Big Twin rigid frames for the perfect chopper look. The brake lever is equipped with integrated lever stops. Mounting screws and lock washers are included.

If you want to get rid of your footboards and are looking for a neat solution for discreet footpegs, you have just found it. These footpeg mounts are mounted directly on the footboard tabs of stock 4 speed Big Twin frames. Just the thing for a slimmed down chopper.

These cleanly manufactured, unobtrusive clutch pedals with pre-mounted backing plates bolt directly to Big Twin frames for the perfect chopper look. The clutch lever is equipped with integrated lever stops and all necessary mounting screws and spring washers are included. The generator can be reached after mounting without problems and original jiffy stand and its mounting bracketcan be installed, due to attached threads, without nuts.

Cleanly manufactured mid-control kit by Prism Supply for all Sportster 1991-2003 with minimalistic design. Most parts are made of stainless steel and partially tumbled to give the whole thing a clean look as well as to ensure a long service life due to less corrosion. The studs for the footpegs are 5/8" in diameter so that most vintage chopper style foot pegs can be mounted without any problems. In addition, the brake control side is equipped with a replaceable brass bushing to maintain precision fit.

These relocation kits allow the backing plate of the mechanical brake pedal to be moved further back and thus also bring the brake pedal further back. Very helpful in combination with Mid-Controls.

These cleanly manufactured discreet brake pedals with pre-assembled mounting plates bolt directly to Big Twin 4-speed frames for the perfect chopper look. The brake lever is equipped with integrated lever stops. Includes mounting hardware and a push rod for Lockheed Wagner Style master cylinders.

These small petcocks fit direct to either a 1/4" or 3/8" NPT bung on your gas tank. This keeps your gas tank looking very clean. They feature a 5/16" diameter hose barb on one end and a fuel filter on the other. The manufacturer recommends 1/4" ID fuel line for a snug, leak proof fit. Rotating the cylindrical piece with the two grooves is how the fuel is toggled on and off. No reserve. Length measured without hose barb and filter.

This rebuild kit works for all Prism Supply fuel valves and includes all components required.

Unrestricted view of the engine, stylishly solved! The polished air filter cover is milled from one solid piece of aluminum and kept simple, clean and classic in design. A small velocity stack and a cone on the inside of the cover ensure optimum air flow and thus maximum efficiency with minimum size. With foam filter element.

For those who value a clean and sleek look on his Harley-Davidson chopper, these Bristol Breather carburetor covers are just right! Made of billet-aluminum and equipped with stainless steel mesh screen to keep the bumblebees out.

These breather bolts are a great way to reduce your cylinder head vent fittings to a minimum.