Kuryakyn

Popular, rubber-lined, die-cast cover for the oil switch.

Slotted cover for all Harley taillamps from 1973 to present. This superbly designed cover will never rust and fits all models without bob-bed rear fenders.

These chrome-plated covers for the spark plugs and head bolts are louvered on top to efficiently dissipate the heat in this area. Easy installation with included mounting rubbers.

Add a classy touch to the Twin Cam engine's spark plug and head bolt area. The covers are held in position with set screws. Spark plugs may be removed without taking the covers off.

Unfortunately most riders find out that their charging system has failed when they end up broken down on the side of the road. A little advanced warning can keep you from being stranded in the middle of nowhere. Now you‘ll know at a glance whether or not your charging system is working properly. The LED battery gauge is an array of LEDs indicating the operating voltage of the bike’s electrical system. Green represents the normal operating range, amber means that the system is not charging, and flashing red will alert the rider of an impending stall or the possibility of damage to the battery and/or sensitive electronic components on the motorcycle. Simple two-wire connection and a compact size (about 2x3/4x3/16”) make installation a breeze. A daylight sensor automatically adjusts the brightness of the LEDs.

The informer replaces the bulbous and difficult to read stock fuel gauge. Its sleek, low profile design incorporates both an LED fuel gauge and an LED battery gauge. Color-coded LEDs make them readable at a glance from the saddle. A daylight sensor automatically adjusts the brightness of the LEDs. they are bright during the day for visibility and dim at night so as not to blind the rider. The fuel gauge has a string of color coded LEDs to indicate fuel level. The Battery Gauge is an array of LEDs that indicate the operating voltage of the bikes electrical system.

Binding several wires together with tape is the fastest way to do the job but it looks VERY ugly. Kuryakyn Wire Wrap oversleeves are a great alternative. They allow quick and easy application and protect your wires from chafing, cutting and abrading. The woven blend polyester tubes are open alongside and can be fit snugly around the wires even with the terminals connected. Particularly recommended for classic bikes when only the original looms will be replaced.

This great looking trim ring with visor completely covers the stock stainless steel bezel. It is siliconed into position giving the illusion of a recessed speedometer by concealing the unfinished edge surrounding the instrument.

Everybody likes this ingenious construction. Available for various tube diameters.

This sleek, streamlined die-cast part covers the unsightly axle nuts and chain adjusters. Comes complete with all necessary hardware and can be installed in 5 minutes.

The forefinger is the strongest finger, and Trigger style levers allow the forefinger to get a real grip thereby making it much more comfortable and easier to pull. Like on our Barnett levers the backside is dished out. Recommended for small handed riders.

A stunning design of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion. With sculpted surfaces and chiseled ends.

These state-of-the-art chrome-plated footpegs have an innovative design which provides custom styling and superior comfort. Feature replaceable hollow-core, wear-resistant rubber insert cleats and interchangeable mounting clevis'.

The all-in-one answer for long-haul comfort. Kuryakyn combined a set of their popular Dually footpegs with offset highway brackets and clamps. The result is attractive, 360° adjustable and easy to install. Besides the complete kits, the brackets and clamps are available separately, too.

The new Switchblade Footpegs are sleek, versatile, and supremely comfortable. In their standard compact mode, they are a large surface area, rubber isolated footpeg. Deploy the concealed heelrest, and now you have the added fatigue-fighting comfort of the famous Kuryakyn ISO-Stirrups. Although this setup will work in any peg location, these are the IDEAL footpegs for bikes using forward controls or as forward mounted cruise pegs!

The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide and many CVO Screamin' Eagle Touring models look sharp, nevertheless could use a little flash. The classy fender tips by Kuryakyn are the perfect chrome complement to these clean fenders.

These slick, flush-mount gas caps combine the high-tech look of aviation style fuel fillers with a built in trim ring which protects the painted surface around the filler opening from damages and gas stains. A keyed entry system permits their ultra thin profile and prevents unauthorized gas refilling. Installation is thinkable easy and requires no cutting. The outer ring fits into the original filler thread with the actual filler cap screwed into a thread in the outer ring. They are available for all tanks with screw-in style filler openings, vented and non-vented, for Fat Bob style tanks and other tanks with a flat surface surrounding the filler hole.

Chrome-plated die-cast cover for the left side of the engine.

Tricky chrome-plated die-cast cover for the rust-susceptible ferrule on clutch cables used on models from 1982 to present. Installs in minutes.

Unfortunately, almost all Harley-Davidson engines that vent the crankcase through the cylinder heads also expel oil through the same passages. Venting directly into the air cleaner, especially a free-flowing air cleaner, often results in an oily mess on the side of the bike. The Bluegrass Breather kit is a simple yet effective way to keep that oil inside the engine or at least keep it contained. The banjo fittings and chrome tubes route the vented gasses upward so gravity can keep any expelled oil droplets in the engine where they belong. Vent lines can be routed up and out of sight beneath the tank, but an optional catch tank is also available for those who would rather vent to a closed container.

Nice accessory that neatly installs over the stock black plastic knob on all XL 1988-2006 and Big Twins 1990-2006 with CV carbs. It not only looks 100% better, with its knurled edge it is also easier to hold and operate.

Fitting by Kuryakyn; for crankcase breather; rubber; gross weight: 10 g