KNIPEX

Compact tool for single, multiple and fine stranded wires of 0.2 up to 6 mm² (AWG 24-10) cross-sections with standard PVC insulation. It adapts automatically to the respective cable cross-section and prevents damage to the conductor. The handy shape and low weight provide high operation comfort. With its narrow head style it can also be used in confined areas. An integrated with wire cutter cuts copper and aluminium wires up to 2.5 mm². The length stop can be adjusted from 6.0 - 18.0 mm for cutting the same stripping lengths during repetitive work. The body is made from fibreglass-reinforced plastic, the interchangeable blades are made from special oil-hardened tool steel.

In addition to their function as needle-nosed pliers these pliers are ideal when you are working on your wiring harness. They grip, bend and cut medium hard and hard wire with precision, induction hardened cutting edges (hardness approx. 60 HRC). They also feature three stripping holes and four positions for crimping end sleeves (ferrules). Made from forged and oil-hardened Vanadium electric steel.

Excellent for gripping, holding, pressing and bending workpieces and for careful installation of components with delicate surfaces. The zero backlash jaw pressure prevents damage to edges. Fast adjustment by pushing a button directly on the workpiece. These pliers replace a complete set of spanners with their parallel jaws, which allow infinitely variable gripping of all widths to the specified maximum size. Screwed connections can be tightened and released quickly by using the ratchet principle. The lever transmission ratio is about 10:1 for strong gripping power.

Every toolbox should contain one. They hold rounded nuts and bolts, axles, cables, springs, or you name it. These grip pliers by Knipex are heavy duty and will give you years of service. They feature an adjustment screw and release lever. With their toggle lever action they provide very high clamping pressure. The body is made from high-strength rolled steel, the gripping jaws are forged from chrome vanadium electric steel.

Daddy’s little helper in the workshop or in your tool roll. Holds rounded nuts and bolts, pins, cables, springs, or you name it. These long nose grip pliers by Knipex are of professional quality and will give you years of service. They feature an adjustment screw and release lever. With their toggle lever action they provide high clamping pressure. The body is made from high-strength rolled steel, the gripping jaws are forged from chrome vanadium steel.

Professional pliers which allow fast adjustment directly on the workpiece. The fine adjustment ensures optimum adjustment to differently sized workpieces and a user-friendly handle position. Guards prevent operators’ fingers being pinched and a favourable lever action results in optimum transmission of force. The self-locking function on pipes and nuts prevents slipping on the workpiece and lowers the required handforce. Gripping surfaces feature special hardened teeth (approx. 61 HRC). Made from chrome vanadium electric steel, forged and oil-hardened

A true classic for your workshop or tool roll. Combination pliers made from special tool steel, forged and oil-hardened. Feature gripping zones for flat and round material, suitable for versatile use. The induction hardened cutting edges (hardness approx. 60 HRC) bite hard wires and thicker cables without problems.

No workshop is complete without a pair of needle-nose pliers with their wide range of uses! Especially in deep and hard-to-reach places, this tool with its long, grippy, pointed jaws often helps you out of trouble. An induction-hardened cutting edge (approx. 61HRC) at the end of the jaws makes it easy to cut through medium hard (Ø 3.2mm) and hard wires (Ø 2.2mm). Made from forged and oil-hardened Vanadium electric steel.

These extra-long mounting pliers with special jaw profile enable, in addition to their function as a long needle-nose pliers, the safe gripping and guiding of objects with a round profile, such as screws, pipes, cables or other round objects. The grooves milled into the jaw profile have a smooth surface, which is gentle on the workpiece. The long handles allow a lot of force to be exerted with little effort. Made of forged steel, hardened in oil.

These little beef-cakes easily cut bolts, wires, rivets etc. up to Ø 4.4 mm. Harley clutch, brake or throttle cables for example, can be shortened without problems. A most efficient joint design ensures exceptional cutting performance with little effort. The forged chrome vanadium steel construction features precision cutting edges, oil-hardened to approx. 64 HRC and with a microstructure to keep the material to be cut in a good position. A gripping surface below the joint allows for gripping and pulling wires with a diameter > 1.0 mm. Grips are covered with vinyl.

The indispensable diagonal cutter for all-round use. It features precision induction hardened (approx. 62 HRC) cutting edges for soft (Ø 4mm) and hard wires (Ø 2mm). The narrow head style allows trouble-free use in confined areas. Made from vanadium electric steel, forged and oil-hardened.

Special pliers for Bowden cables and wire rope up to 3.0 mm Ø (also stainless). Smooth and clean cutting with induction hardened cutting edges whose special shape surround the material and prevent the wires from fanning out. Require only small handforce due to excellent transmission ratio. With opening spring and locking lever. Made from high-grade special tool steel, forged and oil-hardened.

Retaining rings always have the problem that their ends tend to 'disappear' into the groove they sit in. Not so with the so-called Seeger clips, which have a small eyelet at each end, allowing them to be gripped with a suitable pair of pliers. They’re named after their inventor. Since these special retaining rings come in versions for both shafts and bores — and of course in various sizes — we offer a range of circlip pliers from Knipex that are designed for convenient one-handed use and fit the common dimensions found on Harley-Davidson motorcycles.

Special pliers for fitting horseshoe-shaped spring retaining rings and circlips without grip holes. Made from chrome vanadium electric steel, forged, oil-hardened. Works for retaining rings with a minimum ring split gap of 3.6 mm.

Protective jaws for Knipex pliers wrenches. Thanks to their soft and smooth surface, they prevent sensitive materials such as aluminium or chrome coatings from being scratched. Easy to attach by hand and securely fixed to the pliers jaws by internal locking hooks. Consisting of three protective jaws each for the lower and upper pliers jaw.

Need an emergency gasket for your motorcycle? Cut your own! The Knipex combination shears are great assistants for cutting cardboard, plastics, aluminium, brass and copper foils. Their blades are made from stainless, vacuum-hardened surgical steel, precisely ground, with an adjustable bolted joint. With opening spring for easy operation and lock for safe storage. The ergonomically shaped, impact-proof handles ar made of plastic