Grace USA

Tightening slotted screws with your average K-Mart screwdriver mars the slots in no time and makes you look a poor mechanic. The Grace USA Gun Care Screwdrivers are custom hollow ground to perfectly fit the respective slotted screws, avoiding damages. Edward C. Grace, founder of Grace USA, also owned a gunsmith shop and was determined to create a screwdriver that would be a perfectly functional tool for this job. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time. Classy tools for classic bikes - an ideal combination. The 8-piece set comprises the following blade sizes: N2 = 0.8 x 7.5 x 51 mm, G2 = 0.7 x 3 x 53.5 mm, G3 = 0.8 x 4 x 78 mm, H2 = 0.8 x 5 x 56 mm, H3 = 1 x 5 x 81 mm, H4 = 1.2 x 6 x 99 mm, N3 = 1 x 7.5 x 80 mm, N4 = 1.3 x 7.5 x 98 mm,

This compilation flat tip screwdrvers is designed specifically to serve the needs of both professional and hobbyist mechanics. Precision made for a snug fit between the driver and fastener which minimizes the potential for damage to the screw head when torque is applied. The square shanked blades are hardened to R/C 52-56 and are guaranteed not to twist or chip. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time. The 6-piece set comprises the following blade sizes: SS3 = 0.8 x 4 x 80 mm, SS4 = 1 x 5.8 x 81 mm, SS5 = 1.2 x 6 x 150 mm, N3 = 1.3 x 7.5 x 80 mm, SS6 = 1.2 x 7.5 x 132 mm, SS7 = 1.3 x 9 x 182 mm,

Phillips head screwdriver set which is designed specifically to serve the needs of both professional and hobbyist mechanics. The chromium-vanadium steel alloy blades feature a black oxide-finish and are precision made for a snug fit between the driver and fastener which minimizes the potential for damage to the screw head when torque is applied. The handles are turned from Maine hardwood and protected with a nicely stained finish and a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time. The 5-piece set comprises the following blade sizes: P0 = size 0, blade length 77 mm, P1 = size 1, blade length 80.5 mm, P2 = size 2, blade length 44 mm, P2 = size 2, blade length 79 mm, P3 = size 3, blade length 141 mm,

A set of Flat Tip and Phillips screwdrivers designed to serve the needs of the home do-it-yourself mechanic who is looking for a quality set of screwdrivers that will cover a broad range of needs. It consists of three Phillips and three matching slotted tips. Each screwdriver is constructed of USA 8650 Chromium-Vanadium steel alloy blades, precision made for a snug fit between the driver and fastener that minimizes the potential for damage to the screw head when torque is applied. The handles are turned from Maine hardwood and protected with a nicely stained finish, topped off with a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time. The 6-piece set comprises the following blade sizes: P0 = size 0, blade length 77 mm, P1 = size 1, blade length 80.5 mm, P2 = size 2, blade length 79 mm, G3 = 1 x 4, blade length 80 mm, H3 = 1 x 5.5, blade length 81 mm, N3 = 1.3 x 7.5, blade length 80 mm,

When the jobs become a bit more delicate than usual, e.g. speedometer repair, ignition switch servicing, or similar, this set of Micro Flat Tip and Phillips screwdrivers is axactly what you need. It comprises three Phillips and three slotted tips. Each size is constructed of a 67 mm long, 8650 Chromium-Vanadium steel alloy blade and a Maine hardwood handle with a nickel plated steel ferrule. A quality wooden handle is key to a good grip with hands becoming slippery from oil and these Grace USA screwdrivers provide that great wood handle feel that only gets better with time. The 6-piece set comprises the following blade sizes: P0000 = Phillips size 0000, , P000 = Phillips size 000, P00 = Phillips size 00, ST 1/16”, ST 5/64”, ST 3/32”,

For tapping alignment studs home or separating carankcase halves your good ol' steel half pounder simply isn’t the right tool. A Grace USA 8 oz. soft-face mallet is what you need here. It features a brass head that is hand turned from CDA 360 brass rod and hand polished. On one end it has a high quality Delrin tip that is securely locked into place and that offers instant availablilty when the need arises. A properly seasoned hickory handle is pressed into the head and securely pinned. This hammer is a work of art yet designed to serve the professional or hobbyist mechanic.

This pin punch set is made with utmost precision from high quality CDA 360 USA made hex brass rod and finally beautifully polished. They are machine turned and designed for critical work were non-marring and non-sparking are of importance. Carefully made to drive pins or to gently move steel objects. The 8-piece set comprises the following punches: punch 1/16”, punch 3/32”, punch 1/8”, punch 5/32”, punch 3/16”, punch 7/32”, punch 1/4”, punch 5/16”,

For meticulous work on detailed projects. These punches are made from high carbon molybendenum tool steel and properly heat treated with tempered striking end. They are also centerless ground for complete accuracy and we have incorporated a reverse taper from tip of punch to help prevent punch from sticking in the work piece. The punches are manufactured from hex stock steel vs. round which helps stabilize punch from rolling away from user. The 7-piece set comprises the following punches: center-punch 3.5 mm, length 107 mm, tapered punch 1/16”, length 114.5 mm, punch 1/16”, length 108.5 mm, punch 5/64”, length 114.5 mm, punch 3/32”, length 121 mm, punch 1/8”, length 127 mm, punch 5/32”, length 134 mm,

Tools for a thousand uses which will make you soon ask yourself how you had survived before you added them to your toolbox. Clean grease and dirt from dark corners of your engine, tranny, wheel hubs etc., pull lock rings from shafts, catch that lockwasher that just dropped between cooling fins, or you name it. This is a finely crafted set, made with chromium-vanadium 8650 alloy steel. Each hook and pick is of 1/8” diameter, 78 mm long and carefully pressed into the hardwood handle. The handles are hot stamped with the appropriate size and angle of the hook and pick. The 6-piece set comprises the following blades: straight scribe, 30° bent pick, 90° bent pick, double bend pick, 180° loop pick, 180° hook pick,