Burly Brand

Burly Apehanger Cable and Line Kits

If you love the look of Apehangers, but hate sorting out which cables and brake line to use, you will like these complete cable/line control kits. No more trial, error and inventing of bad words that used to accompany mounting a set of Apehangers. Each kit is specific to a year range and bar height and includes extended throttle cables, extended clutch cable, extended brake line and even wiring harness extensions. One part# and you are all set.

more …

Burly Brand Lowering Kits for Softail

The Lowrider look for Springer Softails - no problem with this spring kit by Burly Brand . It lowers the ride height by 11/2”. Complete kit with two shorter chrome springs and all necessary small parts.

more …

Burly Brand Slammer Lowering Kits

The Slammer Kits by the American company Burly Brand combine dropped fork springs and stubby 10.5” shocks into a price friendly package. The fork springs do not require disassembly of the forks and can be installed in twenty minutes in most cases, with the front end still on the bike! The entire Slammer kit is set up to go from box to bike in under an hour with just basic tools on most Sportsters and Dynas! Touring models require fork legs to be slid down to access cap, but leg does not have to be dissasembled. After completion the bike is lowered up to 5 cm on the front and approx. 6,5 cm at the rear.

more …

Burly Brand Lowering Kits

Lowrider look for Tour Glide, Sportster and Dyna Glide models. The bike's rear end is lowered approximately by 1” (25 mm) of which riders of shorter height greatly benefit. The lower shock mount position is lowered and moved backwards but still accepts stock or aftermarket shocks. Installation time is less than 30 minutes (FXD 2 hours). All kits are manufactured in the USA from heavy-duty steel with powder-coated black finish or show chrome finish. For proper and balanced chassis geometry we recommend simultaneous lowering of the motorcyle at the front end with one of our fork lowering kits. We also urge to check for sufficient shock travel.

more …

Burly Brand Adjust-a-Ride

These fully adjustable kits don't require any cutting, grinding, or non-reversible modifications and are simply installed in about an hour. Once in place, the ride height can be lowered by 50mm or raised from standard height up to 12mm in less than 5 minutes. Shocks are not included.

more …

Burly Brand Apehanger Narrow 405

With their narrow bottom these Apehanger bars look right over narrow glide front ends like on Sportster and Dyna models. Dimpled and drilled for easy wiring. They are constructed from high-quality steel tubing and feature knurled centers.

more …

Burly Brand Apehanger Narrow 305

With their narrow bottom these Apehanger bars look right over narrow glide front ends like on Sportster and Dyna models. Dimpled and drilled for easy wiring. They are constructed from high-quality steel tubing and feature knurled centers.

more …

Burly MX Style Footpegs

This serrated edge design derives from motocross footpegs and is guaranteed to keep your feet planted. Burly’s MX footpegs feature an adjustable angle which will let you tune them to your liking. Made from TIG welded steel for strength. Fit all models with 7/16” female H-D mounts.

more …

Burly Brand Lite Clutch

This simple and effective conversion kit improves the leverage of the release mechanism. The result is a 40%   reduction of the manual effort required to pull the clutch lever! Ideal for female riders or those who frequently find themselves caught in stop-and-go traffic. Complete kit including detailed installation instructions.

more …

Burly Voyager Backpacks

Your bags to grab and go. The Voyager roll top backpacks are made from your choice of wet waxed and UV treated cotton canvas or black Cordura, both with leather paneling for support. They feature a fully padded interior with a partition for a 15” laptop, auxiliary port, flannel padded straps, and leather exterior panels. With just the right amount of storage for on the go and roll top variable height snap closure. High quality speed buckles, zippers and snaps as well as an “Anti-Flail Snap System” keep everything right where you want it at speed. Large front zipper pockets provide the storage needed for loose items.

more …

Burly Voyager Sissybar Bag / Backpack

This Sissy Bar bag isn’t like most others. Once removed from the bike, it can be worn as a backpack or carried like a regular bag. Depending on your color preference, it's available in brown waxed cotton canvas or black Cordura, a type of polyamide fabric. Both versions are reinforced with color-matched leather at key stress points. The shoulder straps tuck away into a separate zippered compartment. A side pocket holds the two straps used to attach the Voyager bag to the Harley Davidson Sissy Bar. The closure system is practical: fold the top down four times, align all four grommets, slide the hook through all four of them, and secure it with the attached snap hook. Absolutely anti-flap!

more …

Burly Voyager Tank-Tail Pack

A classic accessory with vintage look. The Voayager tank/tail bag is made of wet waxed UV treated cotton canvas, with leather straps, carry handle and reinforments. It has an easy on, easy off magnetic bottom for mounting it on the gas tank. If you want the bag out of the way, it’s equally at home on the tail with its removable accessory flange that clips and cinches down on the back of your seat or sissy bar. Another feature is the convenient magnetic removable map/accessory screen that sticks directly to the bag lid or separately to the tank if you ride without the bag. The screen is designed to hold any variety of smart phones, small tablets, and even some GPS units. The bag features two exterior zipper pockets and a generous interior space with interior elastic sides. It also has a pass-thru port for charging accessories so you can keep your devices powered up on a long ride.

more …

Burly Voyager Saddlebags

A detachable saddlebag which is made of wet waxed and UV treated cotton canvas as well as leather paneling for support that will age and show character over time. A durable metal and polyethylene reinforced internal frame helps the bag keep shape whether it is empty or packed to the brim. The roll top Closure and snap/velcro Road Shield system keep the wind and elements out. On the inside the bag is fully lined and features an organizer pocket. On the back it has a small zip pocket with snap button locking. High quality speed buckles and zippers with metal button snaps and accents as well as an “Anti-Flail Snap System” keep everything secure. The quick release pin-lock bracket system, which has to be ordered separately, allows the saddlebag to be easily and quickly removed or attached. Off the bike the saddlebag can be used as a messenger bag with the included shoulder strap.

more …

Burly Voyager Tool Rolls without Tools

The Voyager tool roll is made of heavy waxed cotton canvas. With its leather securing straps and leather handle, mounting points and support are offered. Eight pockets in three different widths provide enough space to carry tools in multiple sizes. Additionally, a catch-all zipper pocket makes sure that none of those small parts carried gets lost. High quality speed buckles and zippers keep the tool roll in its place on your fork, sissy bar, luggage rack or wherever you mount it.

more …

23-022

Cable and brake line kit by Burly Brand; fits Sportster 1996-2003; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 30 cm; clutch cable (inner cable): 178 cm; throttle and idle cable (inner cable): 116 cm; brake line (banjos, center to center): 120 cm; wiring harnesses: 33.5 cm; with instructions; without approval marks; gross weight: 1.24 kg

more …

23-016

Cable and brake line kit by Burly Brand; fits Sportster 1996-2003; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 180 cm; throttle and idle cable (inner cable): 120 cm; brake line (banjos, center to center): 126 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.28 kg

more …

23-017

Cable and brake line kit by Burly Brand; fits Sportster 1996-2003; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 185 cm; throttle and idle cable (inner cable): 123 cm; brake line (banjos, center to center): 132 cm; wiring harnesses: 33.5 cm; with instructions; without approval marks; gross weight: 1.3 kg

more …

23-023

Cable and brake line kit by Burly Brand; fits Sportster 2004-2006; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 30 cm; clutch cable (inner cable): 178 cm; throttle and idle cable (inner cable): 116 cm; brake line (banjos, center to center): 123 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.24 kg

more …

23-019

Cable and brake line kit by Burly Brand; fits Sportster 2004-2006; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 187 cm; throttle and idle cable (inner cable): 123 cm; brake line (banjos, center to center): 133 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.28 kg

more …

23-024

Cable and brake line kit by Burly Brand; fits Sportster 2007-2013 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 30 cm; clutch cable (inner cable): 178 cm; throttle and idle cable (inner cable): 115 cm; brake line (banjos, center to center): 124 cm; wiring harnesses: 33.5 cm; with instructions; without approval marks; gross weight: 1.24 kg

more …

23-020

Cable and brake line kit by Burly Brand; fits Sportster 2007-2013 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 181 cm; throttle and idle cable (inner cable): 119 cm; brake line (banjos, center to center): 129 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.28 kg

more …

23-021

Cable and brake line kit by Burly Brand; fits Sportster 2007-2013 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 186 cm; throttle and idle cable (inner cable): 121 cm; brake line (banjos, center to center): 133 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.26 kg

more …

23-094

Cable and brake line kit by Burly Brand; fits Sportster 2014-2020 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 30 cm; clutch cable (inner cable): 178 cm; throttle and idle cable (inner cable): 115 cm; brake line (banjos, center to center): 124 cm; wiring harnesses: 33.5 cm; with instructions; without approval marks; gross weight: 1.27 kg

more …

23-096

Cable and brake line kit by Burly Brand; fits Sportster 2014-2020 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 186 cm; throttle and idle cable (inner cable): 121 cm; brake line (banjos, center to center): 133 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.29 kg

more …

23-027

Cable and brake line kit by Burly Brand; fits Softail FXST/B/D 2000-2006; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 189 cm; throttle and idle cable (inner cable): 121 cm; brake line (banjos, center to center): 133 cm; wiring harnesses: 33.5 cm; with instructions; without approval marks; gross weight: 1.34 kg

more …

23-031

Cable and brake line kit by Burly Brand; fits Softail FXST/B/D 2000-2006; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 194 cm; throttle and idle cable (inner cable): 126 cm; brake line (banjos, center to center): 137 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.34 kg

more …

23-035

Cable and brake line kit by Burly Brand; fits Softail FXST/B/D 2000-2006; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 45 cm; clutch cable (inner cable): 199 cm; throttle and idle cable (inner cable): 131 cm; brake line (banjos, center to center): 142 cm; wiring harnesses: 38 cm; with instructions; without approval marks; gross weight: 1.38 kg

more …

23-028

Cable and brake line kit by Burly Brand; fits Softail FXST/B/D 2007-2010 (non-ABS); steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 190 cm; throttle and idle cable (inner cable): 121 cm; brake line (banjos, center to center): 133 cm; wiring harnesses: 34 cm; with instructions; without approval marks; gross weight: 1.3 kg

more …

23-032

Cable and brake line kit by Burly Brand; fits Softail FXST/B/D 2007-2010 (non-ABS); steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 195 cm; throttle and idle cable (inner cable): 126 cm; brake line (banjos, center to center): 137 cm; wiring harnesses: 34 cm; with instructions; without approval marks; gross weight: 1.31 kg

more …

23-036

Cable and brake line kit by Burly Brand; fits Softail FXST/B/D 2007-2010 (non-ABS); steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 45 cm; clutch cable (inner cable): 200 cm; throttle and idle cable (inner cable): 131 cm; brake line (banjos, center to center): 142 cm; wiring harnesses: 38 cm; with instructions; without approval marks; gross weight: 1.36 kg

more …

23-025

Cable and brake line kit by Burly Brand; fits Softail FLST/C/F/N 2000-2006; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 190 cm; throttle and idle cable (inner cable): 121 cm; brake line (banjos, center to center): 129 cm; wiring harnesses: 33.5 cm; with instructions; without approval marks; gross weight: 1.34 kg

more …

23-029

Cable and brake line kit by Burly Brand; fits Softail FLST/C/F/N 2000-2006; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 195 cm; throttle and idle cable (inner cable): 126 cm; brake line (banjos, center to center): 133 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.34 kg

more …

23-033

Cable and brake line kit by Burly Brand; fits Softail FLST/C/F/N 2000-2006; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 45 cm; clutch cable (inner cable): 200 cm; throttle and idle cable (inner cable): 131 cm; brake line (banjos, center to center): 138 cm; wiring harnesses: 38 cm; with instructions; without approval marks; gross weight: 1.38 kg

more …

23-026

Cable and brake line kit by Burly Brand; fits Softail FLST/C/F/N 2007-2010 (non-ABS); steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 191 cm; throttle and idle cable (inner cable): 121 cm; brake line (banjos, center to center): 129 cm; wiring harnesses: 34 cm; with instructions; without approval marks; gross weight: 1.32 kg

more …

23-100

Cable and brake line kit by Burly Brand; fits FLS Softail Slim 2013-2015 / FLST (except Springer) 2011-2015/ FXSB Breakout 2013-2015 (with ABS) ; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 191 cm; throttle and idle cable (inner cable): 121 cm; brake line (banjos, center to center): 105 cm; wiring harnesses: 38.5 cm; with instructions; without approval marks; gross weight: 1.32 kg

more …

23-101

Cable and brake line kit by Burly Brand; fits FLS Softail Slim 2013-2015 / FLST (except Springer) 2011-2015/ FXSB Breakout 2013-2015 (with ABS) ; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 196 cm; throttle and idle cable (inner cable): 126 cm; brake line (banjos, center to center): 110 cm; wiring harnesses: 38.5 cm; with instructions; without approval marks; gross weight: 1.35 kg

more …

23-102

Cable and brake line kit by Burly Brand; fits FLS Softail Slim 2013-2015 / FLST (except Springer) 2011-2015/ FXSB Breakout 2013-2015 (with ABS) ; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 45 cm; clutch cable (inner cable): 203.5 cm; throttle and idle cable (inner cable): 131 cm; brake line (banjos, center to center): 115 cm; wiring harnesses: 38.5 cm; with instructions; without approval marks; gross weight: 1.36 kg

more …

23-038

Cable and brake line kit by Burly Brand; fits Dyna 1996-2005; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 30 cm; clutch cable (inner cable): 189 cm; throttle and idle cable (inner cable): 116 cm; brake line (banjos, center to center): 121 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.29 kg

more …

23-039

Cable and brake line kit by Burly Brand; fits Dyna 1996-2005; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 194 cm; throttle and idle cable (inner cable): 119 cm; brake line (banjos, center to center): 126 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.32 kg

more …

23-040

Cable and brake line kit by Burly Brand; fits Dyna 1996-2005; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 203 cm; throttle and idle cable (inner cable): 122 cm; brake line (banjos, center to center): 131 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.34 kg

more …

23-042

Cable and brake line kit by Burly Brand; fits Dyna 2006; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 196 cm; throttle and idle cable (inner cable): 120 cm; brake line (banjos, center to center): 127 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.32 kg

more …

23-043

Cable and brake line kit by Burly Brand; fits Dyna 2006; single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 203 cm; throttle and idle cable (inner cable): 122 cm; brake line (banjos, center to center): 132 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.34 kg

more …

23-044

Cable and brake line kit by Burly Brand; fits Dyna 2007-2011 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 30 cm; clutch cable (inner cable): 190 cm; throttle and idle cable (inner cable): 116 cm; brake line (banjos, center to center): 121 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.28 kg

more …

23-045

Cable and brake line kit by Burly Brand; fits Dyna 2007-2011 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 203 cm; throttle and idle cable (inner cable): 119 cm; brake line (banjos, center to center): 125 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.32 kg

more …

23-046

Cable and brake line kit by Burly Brand; fits Dyna 2007-2011 (non-ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 203 cm; throttle and idle cable (inner cable): 122 cm; brake line (banjos, center to center): 132 cm; wiring harnesses: 33 cm; with instructions; without approval marks; gross weight: 1.33 kg

more …

23-104

Cable and brake line kit by Burly Brand; fits Dyna FXD/B/C/L/WG/ 2012-2014 (with ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 35 cm; clutch cable (inner cable): 202 cm; throttle and idle cable (inner cable): 119 cm; brake line (banjos, center to center): 82.5 cm / 53 cm; wiring harnesses: 38.5 cm; with instructions; without approval marks; gross weight: 1.49 kg

more …

23-105

Cable and brake line kit by Burly Brand; fits Dyna FXD/B/C/L/WG/ 2012-2014 (with ABS); single disc; steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 40 cm; clutch cable (inner cable): 203.5 cm; throttle and idle cable (inner cable): 121.5 cm; brake line (banjos, center to center): 88 cm / 53 cm; wiring harnesses: 38.5 cm; with instructions; without approval marks; gross weight: 1.5 kg

more …

23-093

Cable and brake line kit by Burly Brand; fits FLHT/C/U, FLHX 2014→ (non-ABS); steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 33 cm; brake line (banjos, center to center): 50 cm / 50 cm / 70 cm; wiring harnesses: 42 cm; with instructions; without approval marks; gross weight: 920 g

more …

23-106

Cable and brake line kit by Burly Brand; fits for FLHT/C/U and FLHX 2014→ (with ABS); steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 33 cm; brake line (banjos, center to center): 188 cm / 163 cm; wiring harnesses: 38.5 cm; with instructions; without approval marks; gross weight: 864 g

more …

23-107

Cable and brake line kit by Burly Brand; fits for FLHT/C/U and FLHX 2014→ (with ABS); steel / vinyl / copper / plastic, black, satin finish; maximal height of handlebar: 38 cm; brake line (banjos, center to center): 193.5 cm / 169 cm; wiring harnesses: 38.5 cm; with instructions; without approval marks; gross weight: 956 g

more …

16-177

Lowering kit by Burly Brand; fits Sportster 1986-1999; steel, black, powder-coated; with mounting hardware, installation instructions; NOTE: Does not fit 1987-early 1989 Sportsters with clevis type lower shock mount.; gross weight: 500 g

more …

16-313

Lowering kit by Burly Brand; fits Sportster 2000-2003; steel, black, powder-coated; with mounting hardware, installation instructions; gross weight: 560 g

more …

16-319

Lowering kit by Burly Brand; fits Sportster 2005-2015; steel, black, powder-coated; with mounting hardware, installation instructions; gross weight: 550 g

more …

16-321

Lowering kit by Burly Brand; fits Dyna 2006→, except Street Bob; steel, black, powder-coated; with mounting hardware, installation instructions; gross weight: 950 g

more …

16-203

Lowering kit by Burly Brand; fits Touring 1997-2001 (exc. FLHRC 1998→); steel, black, powder-coated; with mounting hardware, installation instructions; gross weight: 810 g

more …

16-318

Lowering kit by Burly Brand; fits Touring 2002-2008 (exc. FLHX and FLHR 2007); steel, black, powder-coated; with mounting hardware, installation instructions; gross weight: 860 g

more …

16-600

Lowering kit by Burly Brand; fits Touring 2009→ (exc. FLTRX, FLHX y FLHRS); steel, black, powder-coated; with mounting hardware, installation instructions; gross weight: 870 g

more …