Regulator/Rectifier by Cycle Electric; fits Big Twin 1989-1999 (Touring →1996, Touring EFI →1994); Low Voltage; aluminum, black, anodised; USA; gross weight: 550 g

Regulator/Rectifier by Cycle Electric; fits Big Twin 1981-1988; Low Voltage; aluminum, black, anodised; USA; gross weight: 540 g

Terminal socket; for custom application Bates AGM Mini Batteries; brass, zinc-nickel plated; width: 4.8 mm; for wires: ~ 0.5 - 1.0 mm² (AWG 20-18); gross weight: 1 g

Modern gel or Li-Ion batteries offer a significant advantage - they are leak-proof. Those who ever experienced spilled acid in their horseshoe oil tanks will highly appreciate this fact. On the other hand, owners of classic bikes do like the looks of their original energy store and the corresponding cover and mounts. With a Bates BattBoy Battery Box you can have the best of both worlds, because what looks like a period type HM5 6V accumulator on the outside can house a safe, modern battery within. Just hook it with two eyelet wires to the terminals on the bottom of the lid and you are all set. Perfect for 6 to 12 volts electrical system conversions, too. When using suitable Antigravity versions you even have some storage room left for a few small spare parts, safety vest, Cuban cigars, etc. Ain´t this one heck of a cool solution for an old problem?

Compact diagnostic charger and tester for 12V motorcycle lead acid batteries, incl. the maintenance-free gel-type batteries. <br />You can charge the battery directly as usually or select the program to charge via the 12V port on CAN-bus models.<br />The OptiMate 4 Dual Program is the ultimate all-in-one tool for 12V battery care at home, that diagnoses, recovers, charges, tests and optimally maintains your battery automatically until it is disconnected. This includes Low voltage pulse recovery for even more effective recovery of badly neglected, sulphated batteries; a user friendly battery test at connection; a slick weatherproof enclosure with built-in mounting lugs and improved energy efficiency.<br />Recommended for batteries in the 2 - 50 Ah range. The LED display with numerous indications informs about the operating state.

This compact battery charger features total epoxy encapsulation. It will constantly monitor, charge, and then maintain your battery, even while totally submerged under water! Perfect for all outdoor or wet situations like bike meets, camping or damp basements. Voltage input works anywhere in Continental Europe, 100-240 AC Volts 50/60 Hz.

Terminal and thumb screw assembly which can be mounted on any suitable place on the motorcycle. It connects the battery’s ground (negative) terminal and cable with the frame.
After installation you have two options:

• use your Kill Bill Switch like an ignition switch. Half a turn out and the current is interrupted.
• use your Kill Bill Switch as protection from manipulation and theft. When you leave your bike remove the thumb screw and thus disconnect the battery from the electrical system.

Perfect for your ignition key. Made from tough but soft, non-scratch rubber material.

Bahco battery chargers and maintainers are fully automatic and micro-processor controlled. Being of the "connect and forget" - type means that you hook them up to your motorcycle battery in periods of non-use and you need not care about the device until you want to go for a ride. The charger/maintainer will automaticcaly keep the optimum charge for your battery.
The device cannot be damaged by reversed polarity. It will automatically check the battery state and type and chose the appropriate charging program:

• Recovery
• Softstart
• Bulk mode
• Absorption
• Monitoring
• Float mode
• Maintain.

A practical hook on its back side allows for hanging it out of the way in convenient areas. Besides the common crocodile clips, the charger/maintainer comes with a 7.5 A fused harness with 6 mm ring connectors, that has a protected SAE plug.
A 3 LED charging stage display informs about the progress. The charger/maintainer works with any lead-based 6 V 6 Ah - 12 Ah or 12 V 12 Ah - 48 Ah vehicle battery. Max. output current is 2 A. The device is splashproof (IP 54).

Bahco battery chargers and maintainers are fully automatic and micro-processor controlled. Being of the "connect and forget" - type means that you hook them up to your motorcycle battery in periods of non-use and you need not care about the device until you want to go for a ride. The charger/maintainer will automaticcaly keep the optimum charge for your battery.
The device cannot be damaged by reversed polarity. It will automatically check the battery state and type and chose the appropriate charging program:

• Recovery
• Softstart
• Bulk mode
• Absorption
• Monitoring
• Float mode
• Maintain.

A practical hook on its back side allows for hanging it out of the way in convenient areas. Besides the common crocodile clips, the charger/maintainer comes with a 7.5 A fused harness with 6 mm ring connectors, that has a protected SAE plug.
A scrolling digital display provides step by step instructions to properly follow the charging of the battery such as “FULLY CHARGED AUTO MAINTAINING”, “CONNECT CLAMPS”, and “ANALYZING BATTERY”.
The charger/maitainer works with any lead-based or Lithium-Ion (LiFePo4), e.g. Antigravity, vehicle battery that has 12 V 6 Ah - 58 Ah. Max output current is 3 A. The device is sealed waterproof (IP 68).

Modern gel or Li-Ion batteries offer a significant advantage - they are leak-proof. Those who ever experienced spilled acid in the battery tray, on the frame, on the swingarm, etc. will highly appreciate this fact. On the other hand, owners of classic bikes do like the looks of their original energy store and the corresponding cover and mounts. With a Bates BattBoy Battery Box you can have the best of both worlds, because what looks like a period 32 amp 12V accumulator on the outside can house a safe, modern battery within. Just hook it with two eyelet wires to the terminals on the bottom of the lid and you are all set. When using suitable Antigravity versions you even have storage room left for a few small spare parts, safety vest, emergency beer, etc. Ain´t this one heck of a cool solution for an old problem?